What s the deal with the toilet flush not sucking down?

Toilet flushes slowly and has no suction, which is a very common problem, usually caused by the following two factors:

1. The toilet is blocked, resulting in the flush not being sucked down, you can use the dredge to dredge it, or find a water pipe, connect the faucet at one end, plug it into the toilet drain at one end, and then block the toilet mouth with rags, and finally open the faucet, and use the water pressure to dredge the pipe.

2. If the toilet is blocked, causing the flush not to suck down, you can use a dredge device to dredge it, or find a water pipe, connect the faucet at one end, plug it into the toilet drain at one end, and then block the toilet mouth with rags, and finally open the faucet, and use the water pressure to dredge the pipe.

First, the toilet is blocked, resulting in the flush not being sucked down, you can use a dredge to dredge it, or find a water pipe, connect the faucet at one end, and plug it into the toilet at the other end.

mouth, then plug the toilet mouth with rags, and finally open the faucet, and use the water pressure to dredge the pipe. The second is that the inner wall of the toilet is too dirty and not clean, causing the flush not to be sucked down, and baking soda can be used.

or white vinegar to scrub the toilet, pay attention not to clean it with steel wool balls or decontamination powder, otherwise it will cause damage to the glaze of the toilet.

1. What's going on when the toilet flushes and doesn't suck down?

1. The quality of the toilet itself is defective. To buy toilet hardware accessories such as toilets, you must not choose cheap ones. Some manufacturers will cut corners, or add their own design problems, they will be cheaper to wholesalers.

So we must look for big brands when buying. These are the things we use every day. If you buy a defective product, it is not only troublesome to replace it, but also a waste of money and time.

2, Toilet seal.

damaged, the tightness is broken. In the structure of the toilet, there is one thing we should pay attention to, that is, negative pressure, the toilet can pump away the "dirty" all because of the internal negative pressure, once the sealing ring is damaged, causing air to enter the inside of the toilet, the pressure in the toilet will naturally decrease, and the suction will also decrease with the weakening of pressure. Poor sealing, long hours can also fill the bathroom with a foul smell.

You can choose to replace the sealing ring, or re-glue the seal to ensure that the sealing ring does not leak.

3. Deviated from the correct position. When installing the toilet, sometimes the installer will accidentally install the offset, and there will be such a situation when the toilet drain is not used properly, so that the toilet drain is partially blocked, so that the amount of water flushed down will be reduced, and the toilet suction will also be weakened. Flushing also leaves "filth".

In this case, quickly find a master to repair it, and you generally can't deal with it.

4. The sewer pipe is blocked. One mistake can cause a clogged sewer pipe and reduce the flow of water.

Second, how to maintain the toilet.

1. Use professional detergent when cleaning the toilet, do not use dish soap.

And use steel wool to wipe the toilet with something relatively hard, which will damage the glaze on the surface of the toilet, which can be a rag or a toilet brush.

2. It should be noted that many people will throw paper towels into the toilet, this problem is not very big, but for some fiber confetti, there will be a problem of blockage. In particular, the wipes used should not be thrown down the toilet.

3. When something causes the toilet to be clogged, you can use vinegar.

soda, etc. If you still can't dredge, you can find a professional to dredge. After unclogging, hair, garbage, confetti, etc., should be avoided and thrown directly into the toilet.

The toilet flush does not suck down, and it is generally considered that the bottom is blocked and can be dredged, and the other is the problem that the edge of the toilet is not tightly sealed, and it can be resealed tightly.

It's the seal that's blocked. Go out and buy a flange (sealing ring) and a tube of glass glue, and when you come back to sit on the toilet again, after it does not leak, use chopsticks as a pad to make the toilet cushion firmly. Then beat the glass glue all around.

If it is a toilet, it is not suction, it is pressed down by the pressure of the toilet water, if it is a smart toilet, it is sucked by the motor, you have to choose according to what kind of model your toilet is, what kind of toilet, according to the toilet. The ordinary toilet must be blocked, and the smart toilet must be broken if it does not suck down.

If you don't suck it down, it's really a problem with the seal. You can buy a sealant to seal the sealant, ten yuan plus the sealing money, ten yuan and 20 yuan, you can deal with it yourself.

You're either clogged in the drain, or your toilet seal is broken. So the inner suction created by the leakage. You have to find a master who installed the drain to show you and replace a sealing ring.

The main reason why the toilet is pumping water and not sucking down is that the toilet is clogged, you should find a professional master and unclog the toilet immediately, so that it will be fine.

The first one is more common, that is, the toilet is blocked to a certain extent, which will cause the water to not be sucked down when flushing, and it needs to be dredged to solve it, and tools such as dredging can be used. The second type is also related to blockage, which is caused by too much dirt at the sewage outlet or sewer pipe, which can be soaked with baking soda and white vinegar, and then rinsed clean. If you want to avoid this problem, you can buy a product with a larger sewage outlet, which can make it easier to discharge dirt and improve the speed of sewage discharge.

Many people have encountered the problem of toilet odor return, which is actually caused by the insufficient design of the water seal height inside the toilet, generally 50mm, if it is lower than this height, it is very easy to return odor.

The toilet flushes the toilet and does not suck down

First of all, it may be that the toilet seal is broken, and air enters, affecting the suction; Secondly, it may be that the toilet has deviated, the drain has been blocked, the amount of water is small, and the natural suction is insufficient; It may also be caused by clogged sewer pipes and slow drainage; Finally, it may be caused by the quality of the toilet bowl, which is caused by insufficient suction power.

What are the precautions for flushing the toilet.

1. Close the lid and flush the toilet: Experiments have shown that at the moment of flushing the toilet, the vortex power of the water can make the fine particles in the excrement swirl into the air of more than 6 meters by force. These bacteria can stay in the air for several hours before falling into towels, toothbrushes, cups, and contaminating toiletries.

2. Don't put a paper basket next to the toilet: People are used to placing a paper basket next to the toilet and throwing the used toilet paper inside. Generally, these tissues and other substances will be stored in the paper basket for more than two days.

The toilet is a shady and wet area, and the garbage stored in the paper basket is very easy to grow bacteria and spread to the surrounding area.

3. Don't dump leftover garbage into the toilet: The oil stain in the leftover garbage is not easy to clean on the toilet wall, and the long-term accumulation of dirt is easy to cause the toilet to flush poorly or block the waterway, which also affects the beauty and service life of the toilet. At the same time, flushing leftovers is also easy to cause water waste, so it is better to throw leftovers into a garbage bag and throw them away.

The toilet is a sanitary facility that we often use in our daily life, but sometimes we encounter the situation that the toilet water does not suck down, which not only affects our quality of life, but also affects the use effect. Let's talk about the reasons why the toilet water does not suck down and how to solve it.

1.Problems with the water tank.

First of all, the reason why the toilet water does not suck down may be a problem with the water tank. If there is not enough water in the tank, it will cause the toilet to not have enough water pressure to flush the items at the bottom. So, if the toilet water doesn't suck down, try filling the tank with water and see if that solves the problem.

2.Clogged pipes.

Secondly, the reason why the toilet water does not suck down may also be due to a clogged pipe. The drain between the toilet bowl and the sewer can become clogged with solid matter. If this happens, try cleaning it up with a drain or a chemical such as sodium.

3.Siphon problems.

In addition, the reason why the toilet water does not suck down may also be a problem with the siphon. A siphon is a pipe at the bottom of the toilet bowl that is mainly used to suck waste out of the toilet. If there is dirt or blockage on the siphon, it will cause the water to not flow properly.

In this case, the siphon needs to be removed and cleaned or replaced with a new one.

4.The toilet seal fails.

Finally, the reason why the toilet water does not suck down may also be due to the failure of the toilet seal. The seal at the bottom of the toilet bowl wears out over time, causing the water to not drain properly. In this case, it is necessary to change the sealing ring at the bottom of the toilet.

Overall, the reasons why toilet water not sucking down can be tank problems, clogged pipes, siphon problems, and toilet seals failing. If you encounter such a situation, you can take appropriate solutions according to the specific situation. If you can't solve the problem, you can ask a professional to inspect and repair it.