There are two holes under the toilet sitting

One is the sewage outlet, and the other is the reserved sewage outlet, which refers to the pit distance.

The pit spacing is divided into 30 cm and 40 cm, if the distance between the reserved sewage outlet and the corner of the wall is 30 cm, then you must choose the 30 cm hole, which is the hole behind the toilet.

If it's 40 cm, choose the hole in the front. The hole is not one-piece, except that it is sealed with special mud and has a plastic lid underneath that, with a few taps, it will fall off.

The toilet is a great invention of human civilization, which solves the problem of excretion of people eating, drinking, and lazing. Some attentive friends will ask such a question when observing and comparing different squatting toilets and toilets, why is there a small hole in the toilet or squatting toilet in many public places? What's so important about that?

Such a brand only considers the cost of filtration, regardless of flushing, and does not care about sanitation and hygiene.

So why make a two-hole toilet?

There are two small holes in the toilet base, and these two holes are the toilet foot screw mounting holes. Due to the possibility of damaging the waterproof layer of the floor, the foot screws of the toilet are basically not installed, and the toilet is installed by a sealing ring with silicone sealant (glass glue).

The leakage of the toilet here indicates that the sealing ring is not installed or the installation is not in place, the flush can not be drained from the sewer pipe, and some of the water will flow to the base area, if the hole is not sealed, it will come out, and the installer will generally seal the two holes with glue to prevent the sealing ring from failing.

It can solve the installation of the toilet bowl with an inappropriate distance from the sewer hole, choose a suitable hole to install and seal the other with a plug cover.

There are two holes in the bottom of the toilet, what is the use? When the toilet is installed, the bottom is made in the cement, and the two holes are reserved for fixing the toilet with expansion bolts.

Summary. There are two small holes in the bottom of the toilet, what is this for? 1.

Auxiliary flushing, cleaning toilet bowl function. 2.To illustrate this problem, we also need to talk about the types of toilets, which are generally called siphon toilets with two eyes under the toilet.

3.The structure of the siphon toilet is that the drainage pipe is of the " type, after the drainage pipe is filled with water, there will be a certain water level difference, and the poop will be discharged by the suction generated by the flushing water in the sewage pipe in the toilet, because the siphon toilet flushing is not with the help of water flow impulse, so the water surface in the pool is larger, and the flushing noise is smaller. Siphon toilets are also divided into two types: vortex siphon and jet siphon.

4.The flush port of the vortex siphon is located on the side of the bottom of the toilet, and the water flow forms a vortex along the pool wall when flushing, which will increase the flushing force of the water flow on the pool wall, and also increase the suction power of the siphon effect, which is more conducive to the discharge of the dirt in the toilet.

There are two small holes in the bottom of the toilet, what is this for?

Please wait patiently for 3 minutes, we are sorting out, and we will answer you immediately, and please do not end the consultation.

There are two small holes in the bottom of the toilet, what is this for? 1.Auxiliary flushing, cleaning toilet bowl function.

2.To illustrate this problem, we also need to talk about the types of toilets, which are generally called siphon toilets with two eyes under the toilet. 3.

The structure of the siphon toilet is that the drainage pipe is of the " type, after the drainage pipe is filled with water, there will be a certain water level difference, and the poop will be discharged by the suction generated by the flushing water in the sewage pipe in the toilet, because the siphon toilet flushing is not with the help of water flow impulse, so the water surface in the pool is larger, and the flushing noise is smaller. Siphon toilets are also divided into two types: vortex siphon and jet siphon. 4.

The flush port of the vortex siphon is located on the side of the bottom of the toilet, and the water flow forms a vortex along the pool wall when flushing, which will increase the flushing force of the water flow on the pool wall, and also increase the suction power of the siphon effect, which is more conducive to the discharge of the dirt in the toilet.

1.Auxiliary flushing, cleaning toilet bowl function. 2.

To illustrate this problem, we also need to talk about the types of toilets, which are generally called siphon toilets with two eyes under the toilet. 3.The structure of the siphon toilet is that the drainage pipe is of the " type, after the drainage pipe is filled with water, there will be a certain water level difference, and the poop will be discharged by the suction generated by the flushing water in the sewage pipe in the toilet, because the siphon toilet flushing is not with the help of water flow impulse, so the water surface in the pool is larger, and the flushing noise is smaller.

Siphon toilets are also divided into two types: vortex siphon and jet siphon. 4.The flush port of the vortex siphon is located on the side of the bottom of the toilet, and the water flow forms a vortex along the pool wall when flushing, which will increase the flushing force of the water flow on the pool wall, and also increase the suction power of the siphon effect, which is more conducive to the discharge of the dirt in the toilet.

What to do with the anti-odor from those two holes in the back.

Okay, pro, wait a minute.

Generally, there will be two symmetrical casting holes behind the toilet, although there is an S-shaped water seal inside the toilet, but the casting holes will still smell back, and you can plug it with glass glue.

There are two holes in the bottom of the toilet, leaving one drain and the other hole can be closed with glass glue.

There are two holes under the new toilet, which are 30 hole spacing and 40 hole spacing, which are designed according to the differences between the north and the south, such as 30 hole spacing is generally used in the south, and 40 hole spacing is generally used in the north.

According to the center of the pit distance, the hole plugging is selected, with magic plastic steel, or resin. Glass glue is more suitable for smoother places, and has little effect on the mud embryo. Magic plastic steel, ** is not expensive, but also very strong.

Glass glue is still not very insured. Generally, the glass glue will age in about 1 year when it often encounters water, and it will have to be re-plugged at that time, which is very troublesome. The installer will be blocked.

Use a toilet drain plug, plastic or rubber, with Shiyun glue (stone glue), or cut a round piece of cardboard the same size as the drain empty, and put the cardboard into the sewage outlet after cutting.

It should be 1-2 mm lower than the diameter of the sewage outlet (when you put it in, you can take a towel and stuff it from another mouth to plug the sewage hole to be sealed, and the cardboard will not fall down when you put the cardboard, and then take it out after the stone cloud glue (stone glue) is hard); Smooth after stirring the stone cloud gum (stone gum)! If it is lower than the ceramic base of the toilet, it is not good if it is high. Moreover, it can be sealed with cement, which is more difficult.

Flip the toilet bowl over to determine the center on the toilet drain and draw a cross center line. Align the toilet drain with the cross line of the ground drain outlet, keep the toilet installed horizontally, and press the sealing ring tightly, and then install the anchor screws and decorative nuts.

The two holes at the bottom of the toilet are actually reserved sewage outlets, which are used to connect the water pipe. The pit distance often mentioned in the decoration, that is, the distance between the wall and the center of the sewage outlet, there are 30 centimeters, and there are 40 centimeters, if the distance from the reserved sewage outlet to the corner of the wall is 30 centimeters, then you generally need to choose the hole of 30 centimeters, that is, the hole behind the toilet, if it is 40 centimeters, you need to choose the hole in front. The hole that is not used needs to be sealed with special mud.

In addition, some toilets also have two small holes on the left and right sides of the sewage outlet, which are screw anchor bolt installation holes, which are generally not installed.

There are two holes in the bottom of the toilet, what is the purpose of each?

There are two holes at the bottom of the toilet: one is the sewage hole, and the other is the jet secondary channel, aimed at the center of the sewage outlet, when flushing, part of the water flows out of the water hole around the toilet circle, and part of it is sprayed out by the nozzle, this kind of toilet is on the basis of siphon with the help of a larger water flow impulse, the dirt is quickly flushed away.

The difference between single and double hole toilet bowls.

For those who do not understand the product when choosing the toilet, they can not only look at the difference between their own products, but also look at the difference between their own products.

1. The difference between single hole and double hole of toilet.

1. From the perspective of the two products, the price of single-hole toilets is more expensive, and the price of double-hole toilets is cheaper, which is also the current ** positioning.

2. From the perspective of performance, single-hole toilets are more flexible and smooth, and the design is more reasonable, while double-hole toilets are easy to be clogged and easy to hide dirt and dirt, so they are gradually replaced.

3. From the perspective of maintenance differences, single-hole toilets are easy to maintain, while double-hole toilets are more troublesome to maintain, and maintenance is very expensive.

Second, the analysis of the key points of toilet selection.

1. Use and test water-saving, because it will be used a lot, so you can take a closer look at its water consumption, whether it has a water-saving and energy-saving sign.

2. Look at the glaze is also the basic selection point, feel whether its glaze is smooth and flat by hand, if the glaze is rough, the surface of its workmanship is poor, easy to scratch, and easy to block.

3. Look at the gloss.

It is important to choose a toilet bowl, if the toilet bowl has a higher gloss, it will be denser and easier to clean.

4. Listening to the sound is the way to distinguish, the sound is crisp, it means that its water tank is smooth, and it is smooth to use, if it is stuck when pressed halfway, it means that the quality of its water tank is not good, which affects the use.