Simple wind chime making process, the easiest way to make wind chimes

Iron wire, and plates.

1. Take out the blue cardboard wood, roll it into a cylinder, then take out the white cardboard, and cut it into long paper or stare strips of the same size.

2. Then paste the white solid glue on the blue cylinder, and paste the prepared cotton pad of the same size on the top of the blue round shirt orange and cylinder and the white paper strip.

3. Just like a white cloud, take out different colors of cardboard, then cut it into love cardboard of different sizes, and paste it on the white paper strip with solid glue, so that the wind chimes are ready.

4. Finally, thread a rope through the middle of the blue cylinder, so that you can hang the wind chimes.

Tools Raw Materials:

Colored cardboard, cotton pads, scissors, white solid glue.

Here's how to make wind chimes:

The main trick is to cut the copper pipe into the rock and drill holes in it. If you want to realize your own design, you must first draw a sketch of the wind chime on the drawing, and modify the design drawing while making the wind chime, so that it can be perfected and become a model for making wind chimes in the future.

Use a pipe wrench or hacksaw to cut the long copper pipe into 7 copper pipes of different lengths. A slight difference in the length of the brass produces several different tones (longer brass is less sounding). Four small holes were drilled at the upper and lower ends of the longest copper pipe, the two at the upper end were opposite to the two at the lower end, and the other six copper pipes were only drilled with two opposite small holes at one end.

Cut a section of electroplated steel wire with pliers, the length is the circumference of the designed steel ring, bend the steel wire into a steel ring, and fold the excess part into a second circle. Thread six pairs of flat glass beads through the steel rings and trim the steel rings into rings so that the glass beads can roll on them. Tie a knot at the junction of the glass beads and the ring and tie a strip of leather.

Cut a short strip of leather, tie a knot with a thick pin through two holes in a copper pipe, and tie the other end between a pair of glass beads on the ring to connect the copper tube with the ring. Continue to use the needle to thread the strip of leather between the other five beads, while tying the other five copper tubes. The strip of leather is threaded through a pair of glass beads at one end to make the hanging end of the wind chime, and the longest copper pipe is tied to the other end.

Innovation

There are wind chimes all over the world, not only in the artistic creation of more and more innovation, in recent years more attention to the performance of the wind chimes, but this wind chimes from the Chinese wind chimes, in the world may be the most popular in Japan, it is one of the representative objects of Japanese summer poetry, is one of the traditional Japanese summer appliances - one of the three treasures of summer, with the meaning of wind measurement and coolness, in the summer in the eaves of the Japanese building hang a string of wind chimes, the wind is cool, listen to its sound can make people quiet and refreshed, is a common decoration in the family.

Because it symbolizes auspiciousness, it often appears in the shape of a mascot with local characteristics; Wind chimes are also widely used in temples in Japan to pray for peace, in case of sacrificial celebrations, then hang wind chimes, with a prayer essay wind chimes image, lies in the shape and sound, it can also be said to be art and **, in the modern era where it is generally regarded as an ornament, why not explore its ancient meaning and then strive to extend its principle and creation, wind chimes can be a very interesting, very potential for development of items.

As follows: Bend slowly.

1. After the non-woven fabric is folded in half along the diagonal, fold it in half.

2. Cut out the three parallel to the long side of the opening at right angles, and do not cut it.

3. Open the cut non-woven fabric.

4. The two small corners in the middle are folded up and fixed with glue.

5. Turn over the buried yard and fold the two small corners of the second layer inside and stick them together.

6. Turn it over and stick the third layer.

7. Turn over and stick the fourth layer, and the main part will be done.

8. Fold a thread in half and pass the finished non-woven fabric through one end with a needle.

9. Tie the knot to fix the wax line.

10. Tie another knot at will and put on a bead.

11. Another thread is inserted into the resin star fruit and folded in half.

12. The double wire head passes through the bell.

13. Tie and fix the knot with the needle thread through the other end of the non-woven fabric.

14. The excess thread can be cut and burned flat.

15. In this way, the beautiful little fresh wind chimes are ready.

If you open this 163 blog, you can see a very detailed legend tutorial, which is a wind chime made by packaging tape, which used to be quite popular.