In a certain period of time, if there is no electricity, will the remote centralized meter reading s

The remote centralized meter reading is composed of three parts: smart meter (user side) + concentrator + prepaid remote meter reading system of the collective society (management party, property, rental building, power supply bureau, etc.).

Remote centralized meter reading and centralized meter reading: mainly refers to the communication mode and communication medium of transmitting data: RS485, power carrier, micro-power wireless, GPRS, NB IoT, 3G 4G 5G and so on.

Summary. Is there a remote meter reading in the power company?

Such as the electric power automatic meter reading system to achieve remote meter reading.

There will be no manual reading of the electric power company, because the remote meter reading is automatically buried by the power company's system, rather than manual meter reading, so there will be no human reading.

So I have so much electricity bill when I don't have electricity?

You can contact your local electricity provider to find out how your electricity bill is being billed so that you can find out why. It's possible that your meter is malfunctioning, causing your electricity bill to be higher than normal usage. It is also possible that the electricity supplier has adjusted the electricity price, and your Donglayin electricity bill has also increased accordingly.

In the past few years, I have ruled out a variety of possibilities, and I have also probed with the power department many times, which is the current problem.

Have you called the police to deal with it?

No, can I still call the police?

Yes. If the problem is not revealed, let the police intervene and the problem will be dealt with quickly!

Okay, thank you! Is it to call 110? Yes.

First of all, the metering chip integrated inside the smart meter collects the user's current and voltage in real time, and then calculates and analyzes the collected data through the microprocessor to obtain the amount of electricity (how many kilowatt-hours of electricity the user uses). Then, through the wireless collector integrated inside the smart meter (it has a mobile phone card inserted on it, similar to the function of our mobile phone), the power data is wirelessly sent to the power remote control management system. Finally, the power remote management system will analyze and process the information sent by these collectors, and then form a report output, so that the user's electricity consumption is clear at a glance.

The power remote management system can be personalized according to the different requirements of users, mainly to realize the remote control, remote meter reading, remote recharge, report printing and other operations of the smart meter, and to monitor, manage, store, record the operation status of the whole system.

With the wide application of smart meters, it provides great convenience for power work. The meter reader who used to walk the streets and alleys no longer needs to run around, and can complete his work in the office in front of the computer. Especially in the vast rural areas, meter reading is a very hard work, some residents live scattered, and meter readers often have to walk dozens of kilometers of mountain roads in order to read a meter.

Regarding smart meters, some people on the Internet have reported that the electricity consumption has increased after changing the smart meter, and they suspect that the smart meter is "charging indiscriminately". In fact, this situation does not exist, but one of the most obvious differences in smart meters is that the accuracy is increased by many orders of magnitude, so the power consumption of your TV, mobile phone charger, LED on the socket, etc., may be detected.

We all know that our country has strict standards for meter measurement: after the production of the smart meter manufacturer is completed, the first parameters of the smart meter will be tested, and only after passing the factory can it be delivered to the relevant testing center of the State Grid, and the State Grid Testing Center will conduct another test on the smart meter delivered by the manufacturer, and after passing the test, it will finally be distributed to our users.

Now there is a card in the meter, the card can be inserted into the meter to detect the real-time electricity situation, if the card is pulled out will be abnormal, the power supply bureau will call ** to the householder to ask!

Now the smart meter is collectively controlled by the meter company, and the meter company obtains the user's meter data and then stores it, which brings a lot of convenience to the user.

There are two common principles, one is the carrier principle for meter reading, and the other is for RS485 principle meter reading.

The principle of remote meter reading is to use "carrier technology" with the help of low-voltage power lines to transmit the user's electric energy meter information wired to the "concentrator" of the general meter, and then the concentrator transmits it to the terminal of the power supply bureau with wireless communication, and the terminal processor transmits the electricity consumption data of each user to the database of the power supply bureau after processing, and the power supply station shares.

The principle of remote meter reading:

The meter is connected to the collector through wires, and the collector uploads the readings to the remote reading server through the network, and the remote meter reading can be realized.

The traditional smart meter user holds the IC card to the power supply department to pay for the purchase of electricity, and the power supply department uses the power sales management machine to write the purchased electricity into the IC card, and the user holds the IC card to swipe the non-contact IC card in the induction area (referred to as the card, the same below), and the power supply can be closed, and the card will be taken away after the power supply.

The current smart meter is different from the traditional mechanical meter, now mostly electronic and inductive, by the built-in integrated meter collector, collection board, collection module after the measurement data is collected, through such as RS485 interface line, power carrier, micro-power signal transmission to a concentrator (about 500 1000 units of centralized reception).

Then through the above three ways or GPRS, CDMA, network cable, etc., it is transmitted to the prepaid remote meter reading system of the collective society (generally the database server), so that the whole process of collecting readings from the smart meter to the concentrator, then to the remote meter reading system, and then to the user's prepayment inquiry (meter opening and closing management), and finally to the management end of the property power bureau.

Speaking of the meter, I remembered one thing, before my meter because the LCD screen was not lit has been black, how many kilowatt-hours of electricity used, I can't see clearly Very annoyed, very headache, So I directly bought a three-phase four-wire meter on the Internet, the neighbors they are used in that kind of day, bought the day before yesterday, got the meter today, called an electrician friend in the afternoon to help me install it, I will tell you the channel I bought on the Internet It is convenient for you and me to give you a reference, and I have taken a picture after the installation today, I also sent it to you to see, if you yourself are thinking about changing the meter, you can take a look at my picture, and then you can go in and see for yourself There are quite a lot of meter styles in their house I hope it can help you.