-
It is recommended to choose the Mitsubishi Outlander for these two cars, which is relatively spacious, has good engine performance, large preferential margin, and high cost performance.
-
Mitsubishi leather is durable, CX5 is relatively modest, depending on personal preference. Mitsubishi, CX5, often run bad roads, unless you are optimistic about the appearance or engine, otherwise there is no comparison.
If you want to buy a used car, you can go to the fair price** to check the specific car source information.
-
Hello, these two cars are more optimistic about CX5, the appearance is relatively good, the SKYACTIV technology is more mature, and the handling is relatively good.
-
I personally recommend the Mitsubishi Outlander, which is more cost-effective, more powerful, and has better off-road performance.
-
Hello, the comparison of these two cars recommends Outlander, stable performance, full of power, good model.
-
Hello, if you want these two cars, you can consider the Mitsubishi Outlander car, which has a fashionable appearance and reliable and stable quality.
-
Mitsubishi's engine is not bad, and this Outlander was originally sold, but even so, I am not used to Japanese products.
-
Mitsubishi Outlander has a fashionable and avant-garde appearance, good interior workmanship, a large wheelbase space, reliable quality, durable leather, a rated power of 141kw engine, good power, fuel consumption is not counted, and the price is relatively cheap and cost-effective compared to other Japanese SUVs.
-
The Mazda CX-5 uses Mazda's latest Skyactiv technology, and the lightweight design reduces the chassis weight by 14% and improves fuel economy. The minimum fuel consumption is less than 7L, and the whole system has six airbags, electronic anti-slip and front and rear anti-collision steel beams, low-speed brake assist system SCBS, and the safety configuration is very sufficient, and the cost performance is high.
-
Mazda CX-5 has smooth lines and beautiful appearance, with an appearance of 4555 1840 1710mm and a wheelbase of 2700mm.
-
Hello, overall, the Mitsubishi Outlander is still quite good, and it is completely suitable for families to start.
-
Mazda CX5 and Mitsubishi Outlander roller skating group test comparison, see whose four-wheel drive technology is better!
-
With a budget of 200,000, you can choose Outlander. The shape design of this car is very fashionable, it looks very domineering, it is equipped with a turbocharged engine, the center console design of the car is very fashionable and technological, and the cost performance is very high, which is very worth starting.
-
If I have a budget of 200,000 yuan, I will choose Nissan Teana; I think the Oldland is more worth buying, because the Oldland has an engine, the front two-wheel drive manual is integrated, the interior space is relatively sufficient, and the body lines are smooth.
-
I think you can choose Outlander. This is a very worthwhile vehicle, Outlander This vehicle is equipped with a very strong engine performance, the engine power consumption is relatively low, and it is more fuel-efficient.
-
You can choose Outlander, Honda Accord, Mazda Artez, Honda Spiri, and Mazda CX, all of which are more cost-effective.
-
You can choose Mazda, this is worth starting, the fuel consumption of this vehicle is, the displacement is.
-
Mazda CX5 and Outlander are both very classic models, both have a glorious sales history, although the audience and style of the two models are different, but also make many consumers wander between the two models, difficult to choose. Judging from the current sales volume, Outlander is a very hot-selling model, and in February, which experienced a Spring Festival, sales also reached more than 4,500 units, while Mazda CX5 sales were only more than 1,600 units, so there is still a huge difference between the two cars in terms of sales, so how to choose the two cars?
In terms of **, there is a certain difference between the two cars, the terminal of the Mazda CX5 entry-level model is 10,000 yuan, and the terminal of the Outlander entry-level model is 10,000 yuan, and the two cars are 10,000 yuan lower than the guide price, but there is a difference of 10,000 yuan between the two cars, although the Mazda CX5 has the blessing of the 6AT gearbox of Chuangchi blue sky and wisdom, but the difference of 10,000 yuan, for consumers whose budget is not sufficient, will give up the Mazda CX5, so as to choose Outlander.
In terms of power, the maximum power of the Mazda CX5 engine is 196 horsepower, the maximum torque is 252 Nm, and the six-speed manual automatic transmission is used, while the maximum power of the Outlander engine is 192 horsepower, the maximum torque is 235 Nm, and the CVT gearbox is used. In addition, the 6AT gearbox designed by Mazda and the engine is perfectly coupled, which not only responds quickly, but also reduces the vehicle's fuel consumption.
In terms of body size, if you consider it in terms of absolute size, Outlander has a slight advantage, the body length is 150mm longer than that of Mazda CX5, so Outlander's ride space will also be slightly better. In terms of chassis structure, the two cars are completely identical, the front overhang is MacPherson, and the rear overhang is multi-link, but at the handling level, Mazda CX5 can be said to be the benchmark level of the same level, which can bring people the ultimate handling feeling, "human and horse unity" may be the best evaluation of the model, and Outlander in handling, although it is a cut away from Mazda CX5, but it is slightly stronger than Mazda CX5 in terms of riding experience.
In terms of configuration, the two cars have their own strengths and weaknesses, and the Mazda CX5 is a little richer. Comprehensive comparison of the two cars, if the budget is sufficient, Mazda CX5 is a good choice, otherwise, it must be Outlander, the price difference of 10,000 yuan, for ordinary consumers is not a small number, and Outlander has a longer history in the Chinese auto market, has experienced a long period of market testing, is a cost-effective model.
-
The Mazda CX-5 is not very noisy. But this car is much better than Outlander. Sales are also much higher than that of the Outlander.
-
I don't think the wind noise of this car is too loud, the whole car is very well insulated, it is much stronger than the Outlander.
-
Definitely prefer Outlander.
-
The speed is up to 120, and the wind noise is sharp**!
-
Please point out the deficiencies in the following aspects.
Powertrain: CX5 is the best, Outlander and X-Trail are a bit worse.
Handling: CX5 is the best, Outlander and X-Trail are a bit worse.
Space: The CX5 is the smallest, the Outlander and X-Trail are a lot stronger, but the Outlander has more than 7 seats.
Shock absorption Silence: X-Trail and Outlander are about the same, CX5 is a little worse.
Fuel consumption: CX5 is the best, Outlander and X-Trail are slightly worse, but not high.
Off-road ability: Outlander top configuration is the strongest, X-Trail and Outlander middle configuration are about the same, CX5 is weaker.
Quality control: Dongfeng Nissan is slightly better than Changan Mazda, GAC Mitsubishi unknown.
Brands: Nissan is the best, Mazda is niche, Mitsubishi's current brand is negative.
Value retention: the same as brand sorting.
Appearance: Opinion, I personally think that the CX5 X-Trail Outlander.
Value for money: There is no doubt that Outlander is much higher, and X-Trail and CX5 are about the same.
Overall, if you're leaning towards sporty fashion, you can opt for the CX5, and if you're leaning towards comfort, you can opt for the X-Trail, which Mitsubishi can pass directly. Personally, I prefer Mazda a little more.
Mitsubishi PLC programming program how to write PLC Hello, 1, after the program is written, you need to transform the program first, there are three ways to transform: the first is to press the F4 key of the keyboard directly, the second is to click the "transform" menu bar, and then click the first item "transform", the third is to click the "program transform" button of the toolbar, we choose the appropriate transformation method according to their own habits 2, after the program is transformed, you need to check whether there are syntax errors in the program, This check only self-diagnoses the syntax, not the design content. To check the program, click "Program Check" in the menu bar of the tool. >>>More
There are still very few in the country, very little, very little.
Mitsubishi Elevator. Lingyun 2 how to seal the weighing process is actually very simple, set1=4, set0=0, sw1 downward confirmation, when the seven segments of the code display in the lower right corner of the two points in turn flashing is completed.
The sustained and stable growth of China's economy provides a broad space for the development of Mitsubishi's CNC machine tool industry. At the same time, in the context of China's active promotion of the strategy of revitalizing the equipment manufacturing industry, it has greatly promoted the development of CNC machine tool manufacturers, which are also known as the "working machines" of the equipment manufacturing industry. >>>More
These two are mainstream PLCs, one made in Japan, one made in Germany, I have used both, both are very representative, it is recommended to learn both, you can learn Mitsubishi's first, because most of the programming methods of other brands of PLC are imitation of Mitsubishi, especially domestic brands, just like the Delta I use now, and Xinjie, which is almost exactly the same as Mitsubishi. Mitsubishi is what a traditional ladder looks like. And Siemens is also unique, although he also said that it is a ladder diagram, but his is a modular ladder diagram, which looks more intuitive than Mitsubishi's, and the step7 software is also very easy to use. >>>More