Difficulty and development prospects of the Registered Consulting Engineer examination

Registered consulting engineer (investment) refers to the professional and technical personnel who have obtained the "People's Republic of China Registered Consulting Engineer (Investment) Practice Qualification Certificate" through the examination and are engaged in engineering consulting business in economic construction after registration. Registered Consulting Engineer (Investment) English translation: Registered Consulting Engineer

The Ministry of Personnel and the National Development and Reform Commission are jointly responsible for the policy formulation, organization, coordination, supervision and guidance of the national registered consulting engineer (investment) qualification system, and the establishment of the National Registered Consulting Engineer (Investment) Qualification Management Committee, which is responsible for the management of the registered consulting engineer (investment) professional qualification, which is located in the China Engineering Consulting Association.

The qualification of registered consulting engineer (investment) shall be subject to a unified national examination system, which shall be held once a year in principle.

The state implements professional and technical personnel in key positions in the engineering consulting industry, and includes them in the unified management of the national professional and technical personnel professional qualification system, and this examination is a special examination held for this purpose. Only those who pass this examination and show that they have the corresponding level and ability can obtain the qualification to practice in the engineering consulting industry. This qualification is valid nationwide.

The Consulting Engineer Examination is held on a three-year cycle, and those who take all the subject examinations must pass the examination subjects within three examination years. Those who take the examination of some subjects (i.e., those who are exempted from the examination of some subjects) must pass the examination of the subject within one examination year.

Yes, as long as the deep iron rod is sharpened into a needle. I'm not studying engineering, and I've already taken the exam, but this certificate is not very popular.

Give you the most direct, the prospect is very good, as long as you are willing to learn without a foundation, you can pass, the first 4 subjects are easy to pass, the last subject is a little difficult, but it is not that you can't pass the test, thank you!

Summary: Registered consulting engineers are very difficult to test, and the knowledge points of consulting engineers are relatively wide, and they must have a more in-depth understanding and comprehensive grasp of project decision-making, macroeconomics, procurement bidding and bidding management and other related aspects. The probability of passing the test is about 10%.

Exams are held once a year and are generally scheduled in April. In principle, test centers are only set up in provincial capitals.

Registration Process:To log in for the first time and register online, please click [First Registration]; To modify personal information, upload**, and online payment, please click [Inquiry and Modification], and for old candidates to register, please click [Old Candidate Registration] Registered candidates can inquire about registration review information and payment information, please log in to the Chinese Personnel Examination Network.

It is difficult to get a certified consulting engineer.

Registered consulting engineers are professional and technical personnel engaged in engineering consulting business in economic construction after passing the national unified examination and obtaining the "People's Republic of China Registered Consulting Engineer (Investment) Practice Qualification Certificate". The Registered Consulting Engineer exam is held once a year, and the exam is generally scheduled in April.

In principle, test centers will only be set up in provincial capitals.

The difficulty of registering a consulting engineer is still there, and the knowledge points of the consulting engineer are relatively wide, and they must have a more in-depth understanding and comprehensive grasp of project decision-making, macroeconomics, procurement bidding and bidding management and other related aspects.

First of all, the knowledge points are relatively broad, and it is necessary to have a deep grasp of macroeconomics, project decision-making, procurement bidding process management, project budget management, financial benefit evaluation, etc., and have a basic understanding of the content, scope, scoring rules and question types of the examination. Otherwise, it will be more difficult to pass. From the beginning of the exam, the cumulative pass rate is only 10%.

This is much simpler than a structural engineer or a cost engineer, and there are many things to memorize, so you just have to work hard.

Registered Consulting Engineer.

The pass rate has always been a concern for candidates, because in recent years, the consulting engineer exam.

There is no data on the pass rate, please refer to the data of previous years. According to the statistics released by the China Association of Engineering Consultants, the average pass rate of the 2012 National Consulting Engineer Examination is the average pass rate of two subjects.

Generally, it is between 10% and 20%, and the fluctuation will not be too large, and the qualification standard will not change much unless there are special circumstances. According to incomplete statistics, the number of registered consulting engineers in 2013 increased by about 80-100% compared with last year, and the number of applicants increased by 20% in 2013, and the pass rate of registered consulting engineers was roughly 20-25%.

Grades management. Examination results are administered on a rolling basis for a period of four years. Those who sit for all four subjects must pass all subjects within 4 consecutive examination years; Those who are exempted from some subjects must pass the examination subjects within 2 examination years.

Certificate of Conformity. Those who pass the Registered Consulting Engineer (Investment) Qualification Examination will obtain the "People's Republic of China Registered Consulting Engineer (Investment) Qualification Certificate" printed by the Ministry of Human Resources and Social Security and the National Development and Reform Commission. The certificate is valid nationwide.

The above content reference: Encyclopedia - Registered Consulting Engineer.

There are no official authoritative statistics, and it is said that they are not high.

It's worth taking a test. Ask an Engineer.

With a large market demand and a wide range of employment, in the long run, the consulting industry has formed a complete system and scale internationally. With the rapid growth of China's economy, the consulting industry is booming in China.

The gold content and value of a certificate are often determined according to the situation of the entire industry, and the state stipulates that where there are more than 60 consulting units, they must be equipped with at least 9 engineers. It can be seen that consulting engineer talents are urgently needed in the future, so the gold content of consulting engineers is self-evident.

In the future development, the consulting engineer played a pioneering role.

role. To do the preliminary planning and approval of the national project, it is necessary to do most of the consulting reports, such as the opportunity study and feasibility study report in the early stage of the project.

Project applications, funding application reports, etc., all need to be done by consulting engineers.

Consulting engineers serve the decision-making phase of a project, and the most important aspect of a project is its decision-making phase. At the same time, in the future, the integration of people and certificates and the issuance of consulting results also require the signature of the consulting engineer.

to be effective.

It is difficult to get a certified consulting engineer.

The knowledge points of consulting engineers are relatively wide, and they must have a more in-depth understanding and comprehensive grasp of project decision-making, macroeconomics, procurement bidding and bidding management and other related aspects.

Secondly, for candidates who take the consulting engineer exam to have a corresponding understanding of the content of the exam, the syllabus of the exam and the types of questions involved in the exam, the consulting engineer is very difficult, and the pass rate is only about 10% since the exam.

Grades management. Examination results are administered on a rolling basis, and those who take all five subjects must pass all subjects in three consecutive examination years; Those who are exempted from some subjects must pass the examination subjects in the current year.

Those who pass the examination will be issued by the Human Resources and Social Security Bureau the "People's Republic of China Registered Consulting Engineer (Investment) Practice Qualification Certificate" uniformly printed by the Ministry of Human Resources and Social Security, and printed by the Ministry of Human Resources and Social Security and the National Development and Reform Commission.

As a national examination for engineering consulting majors, there must be difficulty, after all, the registered professional qualification examination belongs to the talent selection examination, which is different from the vocational examination such as the certificate of employment, and after passing the certificate, it is necessary to register and manage, and then implement the seal authority, so this examination still has a certain degree of difficulty.

There is a certain degree of difficulty, but it will be easier to compare with the cost of a building, and the subjects of the registered consultant examination are divided into five subjects: "Introduction to Engineering Consulting", "Macroeconomic Policy and Development Planning", "Engineering Project Organization and Management", "Project Decision Analysis and Evaluation", and "Modern Consulting Methods and Practices".

The knowledge points of the consulting examination are relatively wide, and the macro economy, project decision-making, procurement and bidding process management, project budget management, financial benefit evaluation, etc. The difficulty is there. But there are still people who pass every year.

This requires finding the right direction, making up our minds, and working hard. In addition, it is necessary to have a basic understanding of the content, scope, scoring rules and question types of the test. Be aware of it, and review it will be more targeted. Make a plan to revise for the exam, step by step, and you will definitely be able to pass the exam.

Is it difficult to learn to be a registered builder? This varies from person to person, after all, everyone's educational background, basic level, and learning ability are different. If you understand the requirements for applying for the registered construction engineer examination, you can judge it according to your own foundation.

1) Those who abide by national laws and regulations and meet one of the following conditions can apply to participate in the first-class construction engineer qualification examination: 1. Obtain a college degree in engineering or engineering economics, and work for 6 years, including 4 years in construction management of construction projects. 2. Obtain a bachelor's degree in engineering or engineering economics, and work for 4 years, including 3 years in construction management of construction projects.

3. Obtain a double bachelor's degree or graduate degree in engineering or engineering economics, and work for 3 years, including 2 years in construction management of construction projects. 4、…

Registered Consulting Engineer. The pass rate is roughly 20-25%.There is a certain degree of difficulty in the examExamination results are administered on a rolling basis for a period of four years. Those who sit for all four subjects must pass all subjects within 4 consecutive examination years;

Consulting Engineer Exam Answering Skills

1. Candidates should pay attention to the words written when answering the questions of the consulting engineer on the test paper, and never be too close to the sealing line, when sealing, it is easy to seal the words that are too close, so that it is difficult for the person who evaluates the test paper to see the words you write.

2. When answering the consulting engineer questions, you should see the questions clearly, grasp the main points, and answer the questions, otherwise you will not be given points even if you write more.

3. If you encounter a time when you are not sure what specifications to use, then use other pronouns to replace it, for example, add a sentence before the content of the answer, according to the relevant laws and regulations, so as to improve the accuracy of the answer. This is one of the more effective ways to score points.

4. According to the amount of questions, master the speed of answering, have a rough schedule in the process of answering, do the easy and will do the questions when answering the questions, and leave the difficult questions or unfamiliar questions to the end, and don't delay too much time on a question and affect the rhythm of answering the questions later.