Skyworth TV doesn t have a cool movie stick, can you watch network TV?

Cool open movie stick is generally built into Skyworth's network TV,If there is no cool open movie stick,The TV may not be a network TV,It does not support networking function。 For TVs that do not have network functions, it is recommended to connect a network TV box to use them to ** network TV programs; The method is as follows (take Youku TV box as an example, other TV boxes have similar operation methods):

1. Need: a networked wireless router, a network TV box (take Youku box as an example), and an HDMI cable;

router) <>

Youku box) <>

HDMI cable).

2. Connect one end of the HDMI cable to the HDMI interface of the Youku box, and one end to the HDMI interface of the TV;

<>3、Youku box and TV are powered on,Press the TV remote control"Signal source"key,Switch the TV toHDMI mode,You can display the main interface of the Youku box;

4. Operate the remote control of Youku box, and enter the "System Settings" interface of Youku box;

5、After entering the system settings interface of Youku box,Click "Network",Enter the network setting interface;

6、After entering the network settings interface,Select wireless network,Youku box will automatically search and display nearby wifi signals,Select the name of the wifi signal where the connecting user is located,Enter the corresponding password,Confirm the connection;

7、At this point,The connection and installation of Youku box and TV、The setting has been completed;

8. Return to the main interface; Users can ** online TV programs or open the browser to surf the Internet and surf.

Summary. Hello, first case: check the network connection.

The second case: check if the software is running properly.

1、In the first case, you can't watch film and television resources on the basis of the normal network connection,Then it may be a problem with individual software**。 You can go to the management section of dangbei market,See if the software needs to be updated and upgraded。

2、And do one-click optimization and deep cleaning for TV。 Due to the long use of TV equipment and the lack of regular cleaning of garbage cache, it will cause a small memory space on the device, so that it cannot be normal**related software.

3. Some live broadcast resources can't work normally because you use ** image quality that does not match your current network environment, so through the network speed test, you can professionally detect the network speed and recommend the applicable ** image quality.

4、If the above three methods still can't ** resources,It is recommended to restore the factory settings of the system to the TV,Sometimes the device will be unable to function normally because the system upgrade is unsuccessful or the version is too low。

Hello,The first situation:Check the network connection status 1、In fact** no film and television resources,It is a common phenomenon that there is no correct connection to the network,Here you need to check whether the network is connected normally。 2. Turn on the TV device, select Network and Connection, search for the wifi in your environment and connect it, or you can plug in the network cable connection on the TV device.

The second case: check whether the software is running normally1, in the first case, you can't watch film and television resources on the basis of the normal network connection, then it may be a problem with individual software**. You can go to the management section of dangbei market,See if the software needs to be updated and upgraded。

2、And do one-click optimization and deep cleaning for TV。 Due to the long use of TV equipment and the lack of regular cleaning of garbage cache, it will cause a small memory space on the device, so that it cannot be normal**related software. 3. Some live broadcast resources can't work normally because you use ** image quality that does not match your current network environment, so through the network speed test, you can professionally detect the network speed and recommend the applicable ** image quality.

4、If the above three methods still can't ** resources,It is recommended to restore the factory settings of the system to the TV,Sometimes the device will be unable to function normally because the system upgrade is unsuccessful or the version is too low。

Hope mine helps you, thanks!

Follow these steps:

1. Insert one end of the network cable into the router and the other end into the TV network port, and turn on the TV.

2. "Menu" button on the Anton remote control to enter the TV settings page.

3. Select "Network & Connections."

4. Wireless connection, select "Wireless connection".

5. Select the wifi signal at home.

6. After entering the wifi password, click "Finish", and the wireless network is set up successfully.

Skyworth Kukai TV connection to the network only needs two to complete。

Preparation: 1 TV.

Operating environment: Wi-Fi (wifi) with Internet access.

1,Turn on Skyworth Cool Open TV,You can see in the main interface of TV"Network settings"Option,Click to enter。

2. In the "Network Settings" interface, select "Wireless Network" according to your personal needs, and enter the interface to select your own wireless network username to connect to the Internet.

3. Select the [Wi-Fi] option, select your home Wi-Fi, and enter the password to connect to the network.

Are you sure there is nothing wrong with your network cable?

Plug it into your computer first and see if it works?

Check out the action here: