What should I do if there is a high latency in playing DNF with a router?

Updated on technology 2024-03-25
7 answers
  1. Anonymous users2024-02-07

    There is only one reason, the Internet speed is not good, and there is something in your house that accounts for the Internet speed.

  2. Anonymous users2024-02-06

    Directly connect to the cat, don't try the route.

  3. Anonymous users2024-02-05

    But it has nothing to do with the delay, the water flow is too slow, and it is useless to use a thick pipe.

    Reasons: 1 Network quality: The network response speed of different operators with the same bandwidth is not the same2. Upload speed: limited or too high.

    3DNS: The DNS server is not suitable.

    4 Router Latency.

    5. The wireless network signal is unstable and delayed.

    Online games have high requirements for network quality, especially competitive games (CS, CF, OL...).Very sensitive to latency.

    Direct cable latency is the lowest. It doesn't feel very convenient to remove the router, so you can only change the wireless to a network cable connection.

  4. Anonymous users2024-02-04

    Hello, there are many reasons that can cause delays.

    In terms of computer configuration: the performance of the network card is poor, resulting in network packet loss.

    In terms of lines: the delay caused by the poor quality of the line stool before entering the house is high, and in this case, you can only contact the operator.

    Hope it helps.

  5. Anonymous users2024-02-03

    Xunyou Accelerator or delete the game.

  6. Anonymous users2024-02-02

    Hello, there are many reasons that can cause delays.

    In terms of computer configuration: the performance of the network card is poor, resulting in network packet loss.

    In terms of lines: the delay caused by the poor quality of the line before entering the house is high, and the operator can only be contacted in this case.

    Hope it helps.

  7. Anonymous users2024-02-01

    First of all, we must confirm whether it is a problem with routing, do not use routing, directly connect to the network cable directly with a computer (if it is adsl cat dial-up Internet access to connect to ADSL cat), after surfing the Internet to see if the delay is the same as when using routing, the delay remains high, if you add or not add the route delay can not come down, it can only show that your network problem has nothing to do with your routing, and the solution in this case is a bit difficult. It is also worth reminding that if it is a dormitory of the school, it is very likely that the bandwidth allocated to each dormitory in the routing settings of the campus network is 2m, but the actual transmission rate depends on the bandwidth occupation of other users in the same network, even if it is a campus network with 100m optical fiber access, 1000 terminals are using the network at the same time, then your actual transmission rate will not go up, let alone delay, and the level of delay is basically not very related to bandwidth. It depends on whether the network you are using is on the same node as the server you are connected to. Let's put it this way, the possibility of low transmission rate and high latency is not only mentioned above, if there is a message that you don't understand.

Related questions
5 answers2024-03-25

1. If the router is used for a long time, it will lead to the aging of the internal lines of the router, and the heat dissipation will not be timely enough, so the network speed of the router will also be slow. At this time, we need to restart the router and let the router clean up these caches during the reboot process. >>>More

12 answers2024-03-25

If the mobile phone can be connected to wifi is relatively simple, there are mainly the following ways: >>>More

6 answers2024-03-25

Wireless routers.

The WLAN indicator is not lit, and most of them are broadband modems. >>>More

7 answers2024-03-25

Hello, method.

Unplug all network cables from the router and keep only the power cable. >>>More

6 answers2024-03-25

There are three situations, I hope it will help you.

Situation 1: The version of tp-link is too low, it is the 08 version, so this problem occurs. Solution: Upgrade tp-link to version 09 and the problem will be solved. >>>More