What to do if you can t remember your router password

Hello, method.

Unplug all network cables from the router and keep only the power cable.

Then use a slightly sharper pen tip to pierce the "reset" hole on the back of the router;

Some are "reset" buttons, and the same is to hold down this "reset";

Disconnect the power of the router again, and remember to hold down the reset button or the reset hole. Because some routers need to be reset when the power is turned on, we also turn on the router power in this comprehensive method;

Plug it back on, and all the indicators on the front panel of the router will flash rapidly

Keep the power on and turn on the power for about 5 seconds (some can take 10s), and the indicator will return to normal flashing. At this point, release and hold the reset key to restore the router configuration to factory defaults.

After the factory value is restored, the router account is generally admin, and some of the passwords are also admin, and some of them are empty, and then the router background management IP should generally be, and some are. Some of this information can be seen from the back panel of the router:

Then we use the network cable to connect to the computer, and the other end of the network cable is connected to any of the LAN ports on the router (usually marked in yellow), but do not connect the WAN ports first; Or connect the router SSID wirelessly :

Then if the computer can get the IP, then the router reset is successful. Then we should be able to enter the router background management IP through IE (such as entering the router.

If you really can't remember, go to the router. Restore the factory settings in the power-on state and set one again.

It doesn't matter if you don't remember the router password, you can restore the router to factory settings, and then re-enter the router management interface to reset the password.

Can be restarted. Or you can use something of your own.

If it doesn't work, you can see for yourself.

Because a router is not what you need.

When the router leaves the factory, it will have a default username and password, which is usually marked on the back of the router (or in the manual).

Take out the router and look for it and take a closer look. If the router doesn't have it on it, then flip through the manual.

If you've ever changed your password and now forgot it.

You can: Reset your router to factory settings.

Note: Router factory reset, similar to Qi Shou Bo mobile phone factory reset, the previously set router Internet access and router password will all be lost, after the recovery, you need to reset the router to use.

Method. Each router has a reset button behind it, usually a small hole, and a few routers are a small raised button marked with reset next to it, which is easy to find on the road high bend by, as shown below:

With the router plugged in, press and hold for 7 seconds to restore the factory settings.

The solution to the router forgetting the limb password is as follows:

Tools Raw materials: Dell calendar rubber slag XPS13-9350-3708, win10, browser.

1. Enter the router's ** in the browser.

2. After entering **, reset a password for the router.

3. Then choose the Internet mode, in general, you choose to automatically obtain the IP address.

4. Then you can enter the broadband and password.

5. After entering, you can reset the wifi and password, so that it can be solved.

Q: How do I reset the router password if I forget it?

Answer: When you don't know the login password of the router and can't enter the router settings interface, please follow the following methods to solve the problem. ps: router login password, in some routers: administrator password, admin password, you can equate them.

Solution: 1. You can check whether your router has a default login password in the nameplate at the bottom of the router? If you have a default login password, enter it to log in.

Check to see if the router has a default password.

2. If the router does not have a default login password, you can try to enter the Wi-Fi password at this time to see if you can log in?

For routers that do not have a default password, their login password is a password set by the user himself when setting up the Internet for the first time. However, some routers will automatically use the Wi-Fi password as the login password when setting the login password, as shown in the figure below. So, when you forget the login password, you can try to enter the wifi password to see if you can log in.

The router login password is the same as the Wi-Fi password.

3. If your router does not have a default login password, and after entering the wifi password, you cannot enter the settings page. Then, at this time, you can only factory reset your router.

Factory reset method:

With the router plugged in, press and hold the reset button on the router for about 10 seconds to restore the factory settings.

If the router is restored to factory settings, all configuration parameters in the router will be lost, that is, the Internet cannot be accessed. Therefore, after a successful factory reset, you must use a computer or mobile phone to reset the router to surf the Internet.

If you don't know how to reset the router password if you forget it, you can read the following article to see the detailed steps to set up the router to surf the Internet. How to set up a TP-Link router on a mobile phone? 》