How long does it take for each layer of paint to dry and apply when making a GUNPLA?

Hello. The first question, water replenishment soil naturally dry for 16 hours (fast drying type and slow drying type are different, this time is the safest), to be honest, I don't dare to move for 24 hours, teach you a little trick, put it in front of the refrigerator radiator after water replenishment, and it will dry quickly, but the time is mastered, otherwise be careful of water replenishment soil cracking!

The second question is what the paint looks like, water-based for 24 hours, oily for 12 hours (the smell is very strong), and enamel for 4 hours (contains harmful ingredients to the body, but the effect is best after drying, but some should be diluted with x10 according to the situation).

The third question, to be honest, I haven't used it, my classmates said it was 6 hours, and I only knew that it was 3 hours of extinction. Wish!

The specific time is not clear.,I'm also a white.。。 According to my habit, it's almost the same to watch a movie and watch some advertisements after filling the soil and spraying. . . Then color, thin spray, according to the water to replenish the soil time.

If I spray thickly, I usually leave it for an afternoon or even a day... Maybe I'm more used to taking my time. It doesn't seem to matter how long it takes for the varnish to dry.

As long as it's not sprayed, it's good to polish it right away. 、Hawkers,That's the way things are.,Sit with Xiaobai and wait for the downstairs to play with the answer.。。

It has a lot to do with the humidity of the environment Inner Mongolia can dry thoroughly in one day in January Guangdong Province can not dry thoroughly in August It is recommended to make a self-made paint box, and it will take more than ten minutes.

The specific time is uncertain, it has something to do with the dryness and humidity of the air, if it rains on a cloudy day, simply don't spray it, it is recommended to spray it in dry weather, the paint surface does not have to wait for a long time, let it dry for a while, and it is recommended to add less to the spray pen after the varnish is sprayed, and pull it to the maximum air output after the full spray is blown, the angle and the model surface are at a small angle, and the blow drying is particularly fast, and then you can directly put the enamel on the engraved line

If you're going into a spray pit, generally all the colors are done by spray paint.

First of all, before painting, it is necessary to apply at least two times of water to remediate the soil, once to check the flatness of the surface of the model, polish the uneven places, and then apply the second water to remediate the soil, which can be used as a primer, which can increase the firmness of the paint.

Then start spraying from a large area of color, generally using nitro paint, after the spraying is completed and the paint surface is completely dry, use washi tape and masking liquid to cover to protect the large area of color, and then spray the detailed color.

After all the colors are sprayed, the bleeding line is carried out, and all the engraved lines must be deepened before the water is refilled, and the enamel paint or seepage liquid is used for the seepage line, because the dilution of the enamel paint cannot dissolve the nitro paint, so you can safely carry out the operation of seepage and erase the overflow seepage liquid.

After the bleeding is completed, you can apply the water sticker, and in my experience, it is better to use the gunshi blue cover (water sticker softener with glue).

After the water stickers are pasted, it is sprayed with protective paint, and there are generally more matting paints, so it is recommended to use protective paint with anti-UV effect.

The above is the more commonly used spray can or airbrush coloring method, the advantage of the airbrush is that the paint color can be adjusted by itself, the spray can is easy to use, but the color is fixed.

In addition, if you use a spray pen, the water refill soil particles are relatively coarse, if you use the air pump air pressure is not very sufficient (such as a turtle pump), it is best to choose sprinkler irrigation water refill soil (of course, there are also people to use the water refill soil very thin, but the effect is not ideal), of course, if you use a large air pump, there is no such problem.

1.There should be no problem with local coloring, but there will be pen marks if the craftsmanship is not good.

2.Just draw it directly.,The effect of the cross method is good.,You can learn it.,Or squeeze out the paint.,It's okay to paint it with a face brush.,Don't paint it out of bounds.。 I used spray paint.

3.Coloring and hooking are two different things, not coloring, directly using a hook pen to outline the line, can make the model more three-dimensional, novice words should learn to hook first. Personally, I like to use Tamiya lacquer + face reading pen to seep the line, and it is very enjoyable.

5.Again, as long as you like it. I didn't like the blue color of 00, so I changed the entire blue part to black. Coloring is not done without stickers.

6.The prime group is purely spelled, not painted; As the name suggests, the parts are painted separately in several colors.

7.Yellow (a lot of horns and ejectors need to be used), green (if you want to paint your eyes), metallic color (or take 00 as an example, 1 to 144 is a lot of places to separate colors).When you buy it, let the boss take it out, and pick it until you are satisfied.

8.The pencil is not much different, it's just a matter of color. Simply order, all with black ticks. There are a lot of professional points, such as gray hooks on white backgrounds, brown hooks on red backgrounds, and so on.

9.Model number Internet search, a lot. Just decide what you like, playing GUNPLA is for your own pleasure.

Good luck

You can do without stickers, I'm like that. Personally, I think you should wrap the tip of the pen with some paper and then shake it to prevent the paint from flying everywhere, and shake the light color more, such as white and yellow. Dark colors should be shaken sparingly, such as gray, blue, etc.

Shake the metallic color at the least, because there will be bubbles if you shake it more. For the first time, press the tip of the pen twice on the paper, the pen should be oblique, and the bevel of the pen tip should be parallel to the paper. As for coloring, just like a highlighter, but be careful.

For details, it is recommended to squeeze out some paint with a pen and draw it with a face reading pen on a plastic plate. Hook pen is a type of coloring used for hooking. It takes a technique to hook with a pen.

It is best not to use markers for color change, as they are easy to cross out. Primegroup refers to not coloring and not outlining. Just put together the stickers.

Color separation, that is, the better the degree of proximity to the primary color after the prime, the more similar it is to the finished product. Markers are mainly needed. Gray red eyes green yellow others when needed to buy a pencil with black gray, generally black.

But gray feels more like, especially the white part. I don't know if there is a model black that is GM01 gray. But you can use a kind of mechanical pencil dedicated to the Gundam hook.,That's .。。

**Some expensive, generally 40-60 a replacement core 10 12 fast models are GP01 GP02

Of course, the model is lz, the imagination is yours, and the coloring is scribbling with a marker

The image point of color separation is: for example, there is a piece of red on the shoulder, which is realized by installing a part, and the plain group is not colored, and the color is not supplemented, so it is completed by stickers. Different people have different eyes on non-stickers to color, you decide for yourself, marker coloring attention, must be even, otherwise it will be a tragedy, the pencil does not need to be shaken, there is no model, only color.

LZ choose me generously.

1.According to your personal preference, the marker is painted on the parts with a marker2Coloring and outlining are two different things, and proper outlining will make the model appear more layered3

You can also use a marker pen for pen painting, or you can use paint for pen painting4The painting is completely in accordance with personal preferences, and the finished product will be distinctive and differentPrime group:

Do not paint the model in any way Color separation: The color division of the model 6Blue, red, yellow, gray, white, there is a set, and basically the main color of the Gundam has 7

Pen pencil is water-based, oil-based, and there are different colors and thicknesses, the same, according to personal preference to choose the color and thickness of the pencil, recommend the gun gm01 (black), gm02 (gray), gm03 (brown).