The GUNPLA making process and the GUNPLA making process are taught

1. Select a favorite model and level, novices recommend bandai's hg level, ** not high, not difficult.

2. Unpack the box on the spot and inspect the goods in front of the boss (mainly whether the plates are complete and whether there are defects).

3. Classify the parts. Be sure to put small parts in a box to avoid getting lost. Large plates can be placed at will, so that they can be easily handled. It's better to categorize the tools as well, otherwise they will be too messy to use.

4. Cut out parts. Professional tools such as nozzle pliers can be used, but other gadgets such as nail clippers can also be used. Keep the runner (the part of the connection between the nozzle and the plate) 2 3mm cut, the knife and pen (or utility knife) go to the runner, and grind the sandpaper above 800 (this step can be ignored by the element group with good knife skills).

Cut as many parts as you want, don't cut them all at once (it will be messy), it is best to cut and polish in the box to prevent the parts from falling to the ground and not being found.

5. Assemble. Assemble according to the number on the puzzle (e.g. H-2 is the No. 2 part on the plate marked H). Pay attention to the direction and do not press the opposite. In the event of incorrect installation, the blade can be inserted into the gap between the joints of the parts to separate them, and they cannot be violently disassembled.

6. Stickers. The sticker is recommended to be picked and placed with pointed tweezers to prevent it from sticking to your hands.

The following is the order of the master stages.

1. dismantling parts; 2. Wash the parts (remove the parting agent);

The following steps are repeated several times in parts).

3. assembling; 4. filling the soil;

5. shading; 6. Varnishing; 7. hooking a line;

Finally, it is matted. If you don't understand any step, I'll explain ......

8. Extinction.

The process is very simple, buy, disassemble, assemble.

Second, the main purpose of the shearing piece, the main purpose of the shearing piece is to hide the nozzle, the most important thing to use is a special model pliers, cut with model pliers and then use a pen knife to simply deal with the nozzle and then sandpaper polishing, so that the nozzle is estimated to be basically invisible.

3. Assemble according to the instructions, as long as you are over 15 years old, it should be no problem.

Fourth, after spelling, you can hook the line and extinguish the top.

That's basically it, and we'll have to wait until later.

GUNPLA Making Tips How to polish a Gundam before spraying.

Hand coating or airbrushing is actually OK, don't want to work too hard to use the airbrush, it is recommended to buy a liquid coated with a second glue layer, so it is very convenient, I forgot what it is called, I think it is good to choose.

Order...

Cut out the parts first and reserve a little water spout. Then use a pen knife to cut off a little bit of the nozzle, leaving only a little, and then sand it with sandpaper (this is the prime group). Spray paint.

It is more complicated to have fake groups and parts first. The fake group is to combine it first, look at the combination degree (Bandai is generally no problem), see if you need to paint or something, and then combine it after it is done, how to seamlessly have **, I won't say much. In fact, except for some ** or something, there is generally no need to do seamless.

After applying the glue, let it sit first, and wait until the glue is all dry before grinding.

Drawing and bleeding are carried out after coloring, and the bleeding is more beautiful than the drawing, but there are requirements for the depth of the paint surface and the line and the fluidity of the bleeding liquid.

Generally, before coloring, it is necessary to add a layer of water to fill the soil, the most commonly used is gray, of course, there are also white and black, in addition to skin color, it is better to use gray. One of the functions of soil filling is to protect the parts, because some materials will be painted to make the parts corroded, cracked, etc.; One is to verify the grinding effect, any scratches on the surface of the parts are obvious after the soil is filled; The last one is to enhance adhesion, some light-colored adhesion is very poor, especially if the surface of the part is not clean, it is difficult to hang up

After applying the soil, you can directly color.

Some other people put on black before coloring because he is going to put on metallic color, so using black as a base will give up the metallic hair color is better, and the effect is good. There is also an electroplating effect, first apply black as a base, then silver or gold, and finally a layer of transparent paint (not pure transparent), there is an electroplating effect.

In addition, if you want to do the max effect, you should also spray the dark color as the base color first.

It's the same step for the small thing, the key depends on your own patience...

The first layer is the base color, so that it will not change color when colored, and after the matte spray, it will eliminate those reflective colors and will be more three-dimensional.

In fact, it is the heart, the heart must be quiet, if you feel that you can't install it with a lot of strength, please look at the drawings carefully, the original Bandai Gundam must be wrong when it encounters this situation.

If you feel that you still can't install it with a lot of effort, please read the drawings carefully, because the original Bandai Gundam must have been installed incorrectly in this case.

This point talent hehe, no, I'll help you pretend.

1.Pincers. Poor electrician pliers are just more difficult to use. A little better with dozens of models of special nozzle pliers. There are more than 100 better Tamiya gold medal pliers. Cut the part off the runner (leave a little spout).

2.Pencil knife. Model pen knives are cheap for a dozen dollars, expensive for dozens of dollars. A must-have, convenient to treat the nozzle. Cut off a lot of water (leave a little more) if you don't have the patience to cut it directly, as for whether it will cut the parts or leave white marks depends on your knife work.

3.Sandpaper. Number 800. Number 1000. No. 2000. Grind off the remaining spouts. Slowly sanded smooth.

4。Pencil. A dozen pieces of Junshi or a few pieces of cherry blossoms. Oily, black or water-based. Hook down the engraved lines on the part and wipe it off with your fingers or a cotton swab dipped in alcohol.

5.Band-aid (standing). Accidentally cut onto the hand speed sterilization bag.

No matter how advanced it is, you basically don't need it.

Take a moment to take a look at this post. I wish you a happy spell.

1000 sandpaper, 2000 sandpaper, nozzle scissors, gold clippers, file, pen knife, scribe pen (awl or compass needle instead). If the model is a motherland goods, you still need 502, good brothers, 800 sandpaper.