Instructions for the use of incubators for incubation equipment

Updates 2-3 times a week with nutritious life skills.

Summary. 1. Ensure the safety of the power supply before use; Choose normal eggs; The total weight of eggs held by the incubator cannot be regulated; Put the machine in the room, keep the temperature at 14 30, and the room should not have chemicals, vibrating objects.

2. About 16 24 hours before preparing for incubation, the incubator should be connected to the power supply, and the water tank in the incubator should not be filled with water.

How to use the incubator?

Hello, I hope to help you with the hail I hope to help you, first, the use of method 1, to ensure the safety of the power supply before the use of the bending sail; Choose normal eggs; The total weight of eggs held by the incubator cannot be regulated; Put the machine in the room, keep the temperature at 14 30, and the room should not have chemicals or vibrating objects. 2. About 16 24 hours before preparing for incubation, the incubator should be connected to the power supply, and the water tank in the incubator should not be filled with water.

Cover the incubator, close the bottom, and power on to test whether the machine is normal.

Three days to start every morning and evening or every 12 hours to turn the eggs, to ensure that at least two times a day to turn the eggs, the angle of turning the eggs 180 degrees, the other potato dust stool of the egg up, in the Miteto to turn the eggs, the eggs in the machine, the middle of the edge, the edge of the middle, so as to improve the hatching rate, the egg turning at the same time to check the water in the sink.

The incubator is fully automatic, how to use the switch, how to press the switch.

Please wait patiently for a few minutes, we are sorting it out, and we will answer you immediately, and please do not end the consultation.

Hello personally for you to inquire hope to help, boot: switch opening order is: main switch (voltage regulator), power switch, fan open and off, heating switch, humidification switch. The light switch can be turned on and off as needed;

1. What is an incubation travel machine Incubator is a closed machine that can control temperature, humidity and oxygen concentration, which can be used to incubate small animals, such as eggs, duck eggs, goose eggs, etc. 2. What are the functions of the incubator The incubator can control the temperature, humidity and oxygen concentration, so that the environment is suitable for small animal incubation, and can also view the temperature and humidity in real time, control heating and cooling in real time, adjust humidity, lighting and other functions. 3. What kind of animal incubator can hatch eggs, duck eggs, goose eggs, fish eggs, lizard eggs, butterfly eggs, etc.

4. What are the correct steps for the use of the incubator (1) Put the incubator in a quiet, well-lit place so that it will not be disturbed by the outside comma; (2) Choose the correct incubation mode according to the type of egg; (3) Prepare eggs according to the operation requirements; (4) Put the eggs into the incubator; (5) Regularly inspect the process of incubation burying bench; (6) Adjust the temperature and humidity according to the prompts; (7) Wash and ventilate the eggs regularly; (8) After the hatching is completed, take out the eggs and do a good job of follow-up care.

How to use the incubator.

How to use the automatic incubator 1. Take out the heating kettle and water pipe and other accessories in the automatic incubator, and check whether the internal components of the machine are complete. 2. Install the water pipe taken out on the incubator and connect it to the tap water pipe to facilitate the automatic water feeding of the incubator. Once you've borrowed a water pipe, be sure to check it to make sure there are no drips.

3. The rated voltage of the incubator is 220 volts, once the voltage is higher than 220 volts, it is easy to burn the humidification pipe if it exceeds 240 volts, and it cannot start normally if it is lower than 220 volts. It is recommended to use it with a voltage regulator installed. 4. The incubator needs to prevent power outages during use, and the generator can be prepared by the trousers to ensure that the incubator can be heated all the time, and the emergency kettle can also be used to heat, but it needs to be guarded by a special person to ensure the temperature in the incubator.

5. After connecting the power supply, turn on the machine, try it out first, and confirm that all the functions of the incubator are normal before incubation. 6. Put the eggs into the incubator, set the temperature, humidity and time required to hatch the eggs through the computer control panel of Micro Brigade Pure Sail, and put the hatching basket in the incubator 3 days before the eggs are broken, and note that the humidity and temperature in the incubator need to be observed at intervals during the incubation process.

Summary. Gao Gao is now answering for you: The following is how to use the incubator fully automatically:

1.Have the incubator, hatching eggs, and power supply ready. 2.

Place the hatching eggs in the incubator, taking care not to overfill them so as not to affect the hatching results. 3.Plug the incubator into a power source and turn on the power switch.

4.Depending on the type and number of hatching eggs, set the temperature, humidity and incubation time of the incubator. These parameters can be set on the control panel of the incubator, and in general, the temperature and humidity of the hatching eggs will vary from egg to egg.

5.Wait for the incubator to complete the incubation process. During the incubation process, no action is generally required, unless the incubator is malfunctioning or an error message is given.

6.When the incubator has finished incubating, the hatching eggs are removed and observed to ensure that the hatching results are good.

Thank you. Gao Gao is now answering for you: The following is how to use the incubator fully automatically:

1.Have the incubator, hatching eggs, and power supply ready. 2.

Place the hatching eggs in the incubator, taking care not to overfill them so as not to affect the hatching results. 3.Plug the incubator into a power source and turn on the power switch.

4.Depending on the type and number of hatching eggs, set the temperature, humidity and incubation time of the incubator. These parameters can be set on the control panel of the incubator, and in general, the temperature and humidity of the hatching eggs will vary from egg to egg.

5.Wait for the incubator to complete the incubation process. During the incubation process, no action is generally required, unless the incubator is malfunctioning or an error message is given.

6.When the incubator has finished incubating, the hatching eggs are removed and observed to ensure that the hatching results are good.

The quail hatching process and how many days it takes for the temperature to rise.

Normally, quails are greatly affected by the temperature of incubation, and if the temperature is low, the incubation process takes longer; If the temperature is high, the incubation process may only take a few days. In general, the incubation process of quail is completed in about 21 days at normal temperatures.

Can you explain the details of this incubation process a little bit more clearly? What exactly is the temperature?

When hatching quail eggs, the temperature and humidity need to be controlled to ensure that the quail pups hatch successfully. 1.Preparing the incubator:

Choose an incubator suitable for incubating quail eggs and set it up according to the incubator's instructions. 2.Place quail eggs:

Place the quail eggs on the hatching tray of the incubator, making sure they are facing upwards correctly. 3.Controlling the Temperature:

Set the temperature of the incubator to Celsius, which is the optimal temperature for quail eggs. Temperatures that are too high or too low can affect hatching results. 4.

Control humidity: During incubation, proper humidity needs to be maintained to ensure that quail eggs do not evaporate excessively. Humidity should generally be maintained between 60% and 65% relative humidity.

5.Waiting for incubation: The incubation time depends on the type of quail eggs and the incubation conditions, and generally takes about 21 days.

6.Incubation Complete: When incubation is complete, the incubator will make a sound to indicate that incubation is complete.

At this point, the quail pups in the incubator need to be transferred to a warm, dry environment so that they can continue to grow healthily.

1. The automatic incubator is heated by two heating pipes C3C5, and two humidification methods are adopted: water humidification and electric humidification. 2. Turn on all C3C5 water humidification (humidification C3) and electric humidification (humidification C5) to reduce the preheating time and debug quickly. 3. When the temperature reaches the set temperature degree and the humidity is 60%, you can turn off the heating C3 or humidify C3

If humidification is not achieved, it can be operated in conjunction with water humidification. 4. In the later stage, the humidity requirements are high, and water humidification and electric humidification can be turned on at the same time. 5. If C5 can be heated normally in summer and reaches the incubation temperature, C3 can be turned off; If C5 does not reach the incubation temperature in winter, C3C5 can be turned off and heated together to reach the required incubation temperature.

During normal operation, there are two ways to humidify the water jacket (humidified C3 and humidified C5). If water humidification (humidification C3) does not reach the desired humidity, you can turn on the electric humidification (humidification C5) for normal humidification. 6. If one of the heating elements does not work properly, you can turn on the other switch without affecting the normal incubation.

7. During the peak period (e.g., 19-21 days) of all rare birds, turn off the heating C3C5 to reach the incubation temperature. Just turn it on, humidify by electricity (humidification C5) and water (humidification C3). (Because the chicks will release a lot of heat in the later stage to avoid the influence of high temperatures) 8. The vent on the back wall of the automatic incubator.

During the incubation period (e.g. eggs), if the temperature reaches the temperature required for normal incubation, it is not necessary to close the vents. If the temperature does not reach the temperature required for normal incubation, one or both vents can be closed. By the time of incubation, all the vents of the skin cover are open.

When heating with fire, the water tray should be covered with a layer of plastic film, and according to the humidity of the seepage, a crack or a hole should be opened, and the water will be automatically replenished.