Which country is the standard for steel DC01?

DC01 cold-rolled steel plate.

European standards. DC01 is defined in the national standard GBT 5213-2008 cold-rolled mild steel plate and steel strip.

Chemical Composition: Carbon C, Manganese Mn, Sulfur S Allowable Residual Content, Phosphorus P Allowable Residual Content, Alt(Al Total) Allowable Residual Content.

Cold rolling uses hot-rolled coils as raw materials and is rolled below the recrystallization temperature at room temperature.

The cold-rolled steel plate is produced by the cold-rolling process, referred to as the cold plate.

Cold-rolled plate. The thickness and width of the cold-rolled steel plate produced by most factories are generally the following, and the thickness and width of the cold-rolled plate are determined according to the equipment capacity and market demand of each factory.

DC01 is cold-rolled low-carbon steel, DC01 is the European standard, China Baosteel has the production of DC01 equivalent to GB15675-95 DX1 or Baosteel B BQB420-99 SECC Japanese grade, SPCC is a general purpose cold hard coil, SPHC is generally used for hot coil SS400 is a Japanese steel grade.

Translated into Chinese is General structure with rolled steel

400 means that the tensile strength of the material is mm2 q195 regardless of grade, and its chemical composition and mechanical properties (s, b, δ and cold formed) must be guaranteed. A1 A1 steel guarantees mechanical properties (S, B, δ and cold formed), B1 steel guarantees the same chemical composition as Q195.

For rolled sheets, wire rods and other products, the guarantee conditions for their mechanical properties can be separately stipulated in the relevant standards according to the characteristics and use requirements of the products. The cold bend test of B1 A1 steel is an additional guarantee condition.

DC01 belongsStainless steel rent and filial piety materialThis kind of material has a medium carbon content, strong plasticity, and low hardness. It can be bent with both hands, but it is also relatively strong and not easy to break, so it is often used in industry.

The chemical composition of DC01 is carbon C, manganese Mn, sulfur S allowable residual content, phosphorus p allowable residual content, alt(al total) allowable residual content.

DC01 has a wide range of uses, such as automobile manufacturing, electrical products, rolling stock, aviation, precision instruments, food cans, etc., DC01 cold-rolled sheet belongs to the ordinary carbon structural steel cold-rolled plate.

The abbreviation, also known as cold-rolled plate, shed oak is commonly known as cold plate.

DC01 is sometimes misspelled as a cold-rolled plate, which is a hot-rolled strip of ordinary carbon structural steel, which is then further cold-rolled into a steel plate with a thickness of less than 4mm.

The above content refers to Encyclopedia - DC01

<>DC01 is a kind of stainless steel for cold continuous rolling of low-carbon steel plate and steel strip. DC01 is the European standard, using the Baosteel enterprise standard Q BQB402 or the EU standard EN 10130 standard, which is equivalent to the national standard GB699 high-quality carbon structural steel in the 10 steel cold-rolled plate, the carbon content is about Yingxin. The new vertical corrugated side plate of the cold flow carriage is made of high-strength DC01 material, and the 700L material square tube is used as the frame, which is much stronger than the ordinary material square tube frame, and the bendability of the deep-drawn cold-rolled excavation with DC01 thin strip is strong, and it can be bent by hand, with good flexibility and high strength, and is suitable for many plate processing.

<> is made of stainless steel. DC01 is a stainless steel with medium carbon content, not particularly hard, and strong plasticity, which can be bent by hand in the case of ordinary hands, and its strength is relatively high, and it will not be easily broken, and it is widely used in industry. DC01 steel stainless steel can choose whether it has undergone heat treatment, whether it has been heat treated will determine whether DC01 has different chemical properties, and related parties can choose to purchase DC01 stainless steel made by different production processes according to their own needs.

DC01 is a cold-rolled steel plate.

DC01 is the European standard, which is defined in the national standard GBT 5213-2008 cold-rolled mild steel plate and steel strip. This kind of steel macro buried bridge is equivalent to the national standard Q195 steel and Q215 steel, which is a low-carbon steel plate, and the carbon content of the steel plate does not exceed and the manganese content does not exceed. DC01 steel plate has high strength, fatigue resistance, corrosion resistance, easy processing, etc., and can be used to make automobile shells, agricultural machinery and equipment, petrochemical equipment, food cans, etc.

The surface of this type of steel plate is the best one, there is no iron oxide scale, its tensile strength is 270-410MPa, the yield strength is 130-260MPa, and the elongation after breaking is not less than 28%. Compared with hot-rolled steel plate, its mechanical properties and process properties will be better. Delivery Status:

Liquid cherry blossoms are delivered in heat-treated (normalized, annealed, or high-temperature tempered) or non-heat-treated.

Precautions for purchasing DC01 steel plate

When choosing cold-rolled steel plates, you can choose relatively large manufacturers with more guaranteed products, such as: Baosteel, Anshan Iron and Steel, Mashan Iron and Steel, etc. Because relatively speaking, the production technical standards and equipment of large brand manufacturers will be more mature, and the quality of their products will be more guaranteed.

Secondly, when purchasing steel plates, we also need to pay attention to check the quality of the products, such as: whether the surface of the selected steel plate is smooth, smooth and shiny, whether there are stains and impurities on the surface, etc. You can also use a ruler to measure the size of the steel plate product whether there is a big error and so on, if the size error of the product is very large, you do not buy.

1. DC01 is made of stainless steel.

2. DC01 is a cold-rolled steel brother digging plate.

It is defined in the national standard GBT5213-2008 cold-rolled low-carbon steel plate and steel strip. Stainless steel is stainless acid resistant steel.

The abbreviation of the steel resistant to weak corrosive media such as air, steam, water or stainless steel is called stainless steel; The steel that is resistant to chemical corrosion media (acid, alkali, salt and other chemical immersion such as dust corrosion) is called slag-resistant acid steel.