How to type the number on the keyboard of a Huawei computer

I'll tell you a few ways, first, lose in five strokes.

Or in Pinyin input mode, press the slash.

key, you can enter. Another method, using the input method of the full keyboard, can find this ton number, and you can enter it.

Press Ctrl+Shift+B on a Huawei notebook to bring up the symbol keyboard and select the punctuation number.

How to type out the tonal number on the keyboard.

When the input method is in Chinese, press (|) on the keyboardbutton or (?) Press the button, and the number will come out. Enter the method.

Set the input method on the computer to the Chinese input state, if you do not switch over, you can press and hold the "shift" key to convert.

Press (|) on your keyboard oncePress the button, and the number will come out.

Different keyboards (|The position of the button is different, generally above the "Enter" key, you can look for it yourself.

Or press the (?) on your keyboard. button button, and the ton number will come out.

Different keyboards (|The position of the button is different, usually to the left of the "shift" key, you can look for it yourself.

Finally, if you feel that the above methods are more troublesome, then directly enter the two words of the ton number in the Chinese state of the Sogou input method, and there will be an option for the ton number, select it. Hope!

There is a tutorial right away. The computer I use at home is Haier's. Run fast! Good heat dissipation! The appearance is atmospheric and beautiful! The screen font is clear! Particularly suitable!

On the computer, you can press the key (|) on the keyboardand keyboard (?.)) key to type it out.

1. First of all, switch the input method used in the computer to the state of Chinese.

2. Then you can select the (|) on the keyboardThe keyboard button containing two symbols comes out when you press the ton.

3. Another pause key is the (?) in the keyboardThe combination of these two keys is also switched to the state of Chinese input method, click once, you can type it.

4. Finally, you can click on the place where you need to type.

PrecautionsPress the pause key on the keyboard, you must switch the input method used to Chinese state.

Why can't you hit the number with the input method of Huawei computer?,The reasons are as follows:Maybe you are under the English input method。 (Both of these are tons in Chinese.)

The method is as follows: 1. Change the input method on the computer to Chinese (after selecting the input method, you can change it according to the shift key). 2. Select the (|) on the keyboardThe keyboard containing the two Hui symbols comes out by pressing the ton.

In Chinese, it is the ton number. 3. The (?) in the keyboardThe combination of these two keys can also be played in the state of Chinese input method.

The Chinese state is the ton number. 4. If you still can't type the ton number, then search for the ton number directly on it, copy and paste. 5. How do you need to play other special symbols, you can directly crack Bida an input method, click into the soft keyboard, there will be a lot of special symbols for its choice.

The steps are as follows:

Device: Huawei laptop

System: win7

Software: QQ Pinyin input method

1. Change the input method on the computer to Chinese (after selecting the input method, you can press the shift key.)

Swap). <

2. Select the (|) on the keyboardThe keyboard containing the symbols of the two worlds is out by pressing the tonal number. ( In Chinese it is the Stuffy Return Petun.)

3. The (?) in the keyboardThe combination of these two keys is in the Chinese input method.

In the state, it is also possible to make a pause. The Chinese state is the ton number.

Classification of keyboards:

According to the number of keys of the keyboard, it can be divided into 86-key keyboard, 101-key keyboard, 104-key keyboard, and win98 keyboard.

86-key keyboard: An early keyboard with 86 keys on the keyboard.

101 key keyboard: 101 key: Separate several common keys and number keys and combine them into the third area of the keyboard Numeric keypad area, so that there are 101 keys.

You need to make sure to switch to the Chinese input teasing method and use Chinese input, check whether it is in half-width mode, and finally just press the [ ] or [ ] in the keyboard symbol area to type the Chinese tonne [、] The following is a detailed introduction:

1. First of all, let's check whether it is due to the Chinese input state, which can be adjusted to the Chinese input method by [ctrl]+[shift], and use [shift] to switch the input state in Chinese and English;

2. You also need to check whether it is half-width mode, and use [shift] + [spacebar] to switch;

3. After all the settings are completed, you can press the [ ] in the keyboard symbol area to type the Chinese [, dry liquid] ton.

The keyboard in the figure below is an example, you can press the red box position button to make trouble or the sock out of the horn in the Chinese input method liquid shock state.

Click the input icon on the taskbar. Click to select a Chinese input method. Press the question mark key on your keyboard. Successfully hit the pause number. Detailed steps:

1. Click the input method icon on the taskbar.

2. Click to select a Chinese input method.

3. Press the question mark key on the keyboard.

4. Successfully hit the tonal number.

5. Click on the input method at the top of the Mac.

6. Click to select Chinese input.

7. Press the question mark key on your keyboard.

8. Successfully output the ton number.

Take the Microsoft Pinyin input method that comes with the win10 operating system as an example,Switch it to this input method。 Then press the slash button to the left of the Enter key to enter the number. Specifically, take the use in word software as an example, and the input method is as follows:

1. Open a file that needs to be entered on the computer.

2、After entering the file, click on the input method in the lower right corner,Select Microsoft Pinyin。

3. At this time, find the slash button on the left side of the enter key on the keyboard of the computer, and press the button.

4. You can see that the input of the ton number has been realized by switching the input method to Chinese and pressing the button.

First open the text that needs to be entered into the ton, click the input method icon, adjust the input method language to Chinese, and finally click the tonnage key on the keyboard.

The specific steps are as follows: 1. Open the word document on the computer, or other windows that can be entered. 2. After opening word, adjust the input method to the Chinese input method state.

3. In the world of Chinese input method, press the pause key next to the shift key on the right side of the keyboard. 4. Press the key next to the shift key on the right side of the keyboard, and you can make a pause.

A pause is a pause between a juxtaposed word or phrase, and in Chinese, there are mainly things that separate the juxtaposition of the same kind, usually a single word, a word or a short sentence, in which the pause is shorter than the comma. Separate the serial number and the text that use Chinese characters as the serial number.

How to type the ton number on the keyboard

The instructions are as follows. First of all,Click on the place where you enter the text,Call up the toolbar of the input method,Different input method icon colors are different。

will be entered into the method"English"The status switches to"Chinese"status, you can click the word "English" with the mouse.

will be entered into the method"Punctuation in English"Toggle to"Chinese punctuation", the English punctuation person full stop is a black dot.

At this time, we press the " " key on the keyboard, that is, the key above the "enter", and enter the "ton number".

We can also press the " " key on the keyboard, that is, and "?".In one key, the input is also "ton".

Hold down shift and press again. You can type, but you need Chinese input method support, otherwise the English keyboard will not appear tonal number.