What is the difference between run flat tires 96Y and 100W

Updated on Car 2024-03-11
8 answers
  1. Anonymous users2024-02-06

    1. The maximum load is different

    1) The maximum load weight of the run-flat tire 96Y is 710kg.

    2) The maximum load weight of run-flat tires 100w is 800kg.

    2. The limit speed is different

    1) The ultimate speed of the run-flat tire 96Y is 300km h.

    2) The ultimate speed of the run-flat tire 100W is 270km h.

  2. Anonymous users2024-02-05

    Run-flat tires 96Y

    Run-flat tires 96Y

    The English letters that follow the letter for speed are explained in the table below:

    j corresponds to 100km h

    k corresponds to 110km h

    l corresponds to 120km h

    m corresponds to 130km h

    n corresponds to 140km h

    p corresponds to 150km h

    q corresponds to 160km h

    r corresponds to 170km h

    s corresponds to 180km h

    t corresponds to 190km h

    h corresponds to 210km h

    v corresponds to 240km h

    w corresponds to 270km h

    y corresponds to 300km h

    VR corresponds to >210km h

    Zr corresponds to >240km h

    Run-flat tires 96y 96 means load capacity 710kg y means speed limit 300km h

    Run-flat tires 100W 100 means load capacity 800kg W means speed limit 270km h

    Flat-proof tires 96y, load capacity 710kg, less than run-flat tires, 100w load capacity, 800kg, run-flat tires, 96y, speed limit 300kmh, is greater than 100w speed limit of run-flat tires, 270km h

  3. Anonymous users2024-02-04

    Because the load factor is different. 96 corresponds to the load of each tire is 710kg, 100 corresponds to the load of each tire is 800kg, Y refers to the speed level of the tire, that is, the maximum speed of the tire, Y represents the maximum speed of the tire is 300 kilometers per hour, there are more than 10 kinds of marks on the car tires, and it is very important to correctly identify these marks for the optional use and maintenance of tires.

    Tire maintenancePay close attention to the tire pressure.

    It is also particularly important for driving safety, if the tire pressure is too low, then it will lead to increased tire wear, which will shorten the service life of the tire, and at the same time, the tire pressure is too low will also lead to an increase in fuel consumption, and the cost of using the car will naturally increase. Limb arguments.

    It is likely that there will be unilateral wear, at this time, the old and left and right can slow down the occurrence of this kind of thing, and at the same time will prolong the service life of the tire, if the unilateral wear is serious, the puncture is also a matter of minutes, in fact, if the tire is really worn out seriously, it needs to be replaced, but basically the service life of a tire is about 4 years or 5 years.

  4. Anonymous users2024-02-03

    1. The maximum load is different

    1) The maximum load weight of the run-flat tire 96Y is 710kg.

    2) The maximum load weight of run-flat tires 100w is 800kg.

    2. The limit speed is different

    1) The ultimate speed of the run-flat tire 96Y is 300km h.

    2) The ultimate speed of the run-flat tire 100W is 270km h.

  5. Anonymous users2024-02-02

    The meaning of the tire 96w, the previous number indicates the load index of the tire, 96 means that each tire can carry 710kg; The English letters at the back indicate the speed grade of the tire, and W indicates that the maximum speed of the tire is 270 kilometers per hour.

    1. Tire speed grade: The speed grade of the tire refers to the maximum speed allowed by the tire, which is generally represented by uppercase English letters and marked on the side of the tire. Different letters indicate different speed classes, such as "L" for a maximum permissible speed of 120 km/h, "T" for a maximum permissible speed of 190 km/h, "V" for a maximum permissible speed of 240 km/h, and so on.

    Generally, the more advanced the car, the higher the speed grade of the tires used. However, generally speaking, the speed rating of tires equipped on the car is much higher than the top speed of the car. For example, a model with a top speed of 185 km/h will be equipped with H-class (240 km/h) tires; The model with a top speed of 210 km/h is fitted with W-class (270 km/h) tyres.

    2. Tire load index: The load index of the tire refers to the maximum load capacity that the tire can carry under the condition of inflating the tire according to the specified pressure. It is usually expressed by a number, such as 91 means that the maximum load capacity of each tire is 615kg, 96 means that the maximum load capacity of each tire is 710kg, and 105 means that the maximum load capacity of each tire is 925kg.

    Obviously, the heavier the car, the greater the load index of the tires. However, the load index of tires generally has a relatively large safety margin, even if it slightly exceeds the maximum load capacity of the tires, it is no problem, but doing so for a long time will reduce the service life of the tires.

    Photo by Ling Xiufang of Pacific Automobile Network).

  6. Anonymous users2024-02-01

    The difference between 96V tires and 96W tires is mainly reflected in the difference in the top speed of the car.

    The side of the tire is marked with 96V and 96W, where 96 represents the load coefficient of a single tire, representing the actual load value of 710kg, and the letters behind represent the maximum speed that the tire can bear, V represents the maximum speed of 240km h, which is generally used for sports cars, and W represents 270km h, which is generally used for special sports cars.

    In general, tire representations are mostly in this pattern: 195 65R1588H or 195 65HR1588.

    15: represents the width of the tire.

    65: Represents the flatness of the tire.

    R: The production process of the tire is radial tire.

    15: is the diameter of the hub.

    88: indicates the load factor.

    h: represents the velocity coefficient.

    Of course, there are also many classifications of load factors and speed factors. Let's take a look:

    Speed coefficient: N for 140 km h, p for 150 km h, q for 160 km h, r for 170 km h, s for 180 km h, t for 190 km h, u for 200 km h, h for 210 km h, v for 240 km h, z for 244.

    Load factor: The value range is between 50 and 130, which means that the actual load value is between 190kg and 1900kg.

    Millions of car purchase subsidies.

  7. Anonymous users2024-01-31

    100 represents the load index. 100 represents the maximum weight that the tire can hold is 800 kg.

    Therefore, when choosing a tire model, you need to choose according to the weight of the body. And not blind choice.

    The higher the load class, the more expensive the tires.

    W stands for speed level. W stands for the maximum speed that the tires can withstand is 270km/h, so when choosing a tire model, you need to choose the right tire according to the displacement of the vehicle.

    The higher the speed rating, the more expensive the tires**.

  8. Anonymous users2024-01-30

    100 is the load index of the tire, and the maximum load of each tire corresponding to 100 is 800kg.

    W stands for the speed class of the tire, which indicates the maximum speed at which the tire can carry a specified load under specified conditions, and the maximum speed of W is 270 km/h.

Related questions
10 answers2024-03-11

First of all, explosion-proof electrical equipment is divided into two categories: Class I is electrical equipment used in coal mines; ii Electrical equipment used in places other than mines. Class II electrical equipment is further divided into three categories: etc. >>>More

9 answers2024-03-11

The explosion-proof version is IP65 rated. It is suitable for flammable and explosive occasions (coal mines. Chemical industry. Petroleum. power and other industries), Ann. >>>More

3 answers2024-03-11

After years of research on rare metal technology, Cactus Car Safety Film has always adhered to the core of creating a green life and advocated the concept of creating a healthy environment in the car. Combined with the traditional film theory, abandon the problem of ignoring the oxidation of the solar film due to sunlight, take the solid foundation as the first, improve the essence of the film at the same time, through the conditioning of metal elements, so that the heat insulation system, antioxidant capacity and service life of the solar film can reach the optimal state, so that the solar film can be displayed to you in the most balanced, stable and healthy state. >>>More

9 answers2024-03-11

Sticking it on the inside of the car glass, go to the one next to the University for the Aged on Houhu Jinqiao Avenue, it seems to be called Zefeng. I posted it there, a friend introduced the past, I was going to go there to post a Johnson & Johnson, and then the clerk recommended an American global one, it felt good, that Johnson & Johnson and the global test it, or choose the global world. Sent a solar film maintenance, and there is also a tracking service.

17 answers2024-03-11

This is a sign that can attract each other, especially since both parties not only have exactly the same places to complement each other, but also have very similar places to cooperate, if they can be together, it is an enviable combination! This is also a common pairing. Trick Tips: >>>More