ghostxp auto install system appears File name 546 is what s going on

To install the XP system, you need to change the hard disk working mode to IDE, and you need to use the installed version of the XP system to install (non-GHOST version), the specific operation is as follows:

1. Insert the XP disc into the computer CD-ROM drive;

2. Press the F2 button or DEL button when booting up to enter the BIOS system;

Note: Depending on the model of the machine, the button to enter the BIOS may be different, please refer to the screen prompt in the lower left corner for details.

3. Select the Advanced tab, select SATA Contoller Mode, and press Enter.

4. Select IDE and press Enter.

5. Press the F10 key to save and exit;

6. Press the F12 key to pop up the quick start menu, select the line with the word cd or ***, press the enter key, and then install it according to the guidance.

If you want to install a dual system,It's best to install XP first,Then install win7,It's easier to install,,Generally, it's from the low version to the high version!!

Change the disk, this is if you can't read the optical drive, you can also change the optical drive, the reason is that your reading function is wrong.

One is the problem of your optical disc, which fails to read the data, and the second is the problem of your optical drive, which cannot read the complete data, and it will be reported as an installation failure!

If there is a problem with the optical disc media or the software image, you can copy it to another computer if you don't believe it. The ISO file will definitely not be copied.

So try again with a good plate.

Have you tried installing other systems?

Usually the ghost version is a clone of the entire system! There may be a problem during the cloning process that may result in some parts not being cloned properly!

It's best to use a different installation version!

If you try other system installers and still can't work, then it proves that you have a problem with your computer, not the system and drivers!

I can't use the installed version anymore.。。。

The optical drive can read the disk does not mean that all the disks can be read, the disc file can be read, it does not mean that all files can be read or you have a problem with the system disk.

The optical drive has been used for a long time, and the ability to recognize some disks has decreased. Caused by some scratches or poor reading ability of low-quality disks.

Let's try it with a new system disk.

It is best not to use the ghost system disk and install your operating system

The recommended is the original system CD, which is installed step by step

It is recommended to change the optical drive! Sometimes this happens when the optical drive is not good.

I can't see it, is there any hint?

I can't copy the file normally, do you install it with a CD, or use a USB flash drive?

1.If you are using a disc to install, please replace the installation disc again, replace the installation system disc or it still does not work, just change the optical drive, it may be a problem such as scratching and damage of the disc or a problem with the optical drive that causes the read and write failure.

Version issues. The version of the image created is high, and the version of the ghost image that is restored is low.

4.If there is an error in the original C disk or the boot sector of the hard disk, it is recommended to format the C drive before installing the system, or format and repartition the entire disk before installing it.

5.Whether the hard disk has bad sectors or not, if the hard disk has bad sectors may be affected.

6.Hardware issues: Try cleaning your computer's memory to increase your chances of success!

Change the disc. Or a USB flash drive installation.