-
Farmers can start from the following three aspects:
1.Choose the feed that suits your farming mode. According to the breeding density, breeding season and the growth stage of the fish to select the feed, so that the feed nutrition is suitable for breeding, can greatly save the cost of feed.
2.Adjust more water and increase oxygen, and change more water if possible, so that the same material can play a better effect, improve feed remuneration and improve fish immunity and reduce diseases.
3.Choose the appropriate feeding time, try to avoid feeding too late (such as after 16:00), and ensure that the dissolved oxygen in the water is sufficient during the digestion period after feeding.
-
Summary. How long is the culture cycle of tilapia1, the culture cycle of tilapia is generally about 5-6 months. Increasing the volume of water, reducing water quality and fertilizer, eating aerators, and strengthening the prevention and control of fish diseases can shorten the breeding cycle of tilapia.
Tilapia fry are generally stocked in mid-April, and the temperature gradually rises after the beginning of spring, and the best time to stock is when the water temperature stabilizes at 15 or above. 2. Pay attention to the control and prevention of fish diseases, and disinfect and sterilize ponds and fish schools at intervals. 3. According to the change of weather or the growth of the fish, carry out reasonable feeding.
4. In summer, insist on opening the aerator every day, and use the agitation effect of the aerator to increase the dissolved oxygen of the water body, promote the decomposition of organic matter of the bottom impurities, and prevent the fish from floating due to lack of oxygen. 5. During the breeding period, the fish that have met the listing requirements will be cleaned out of the pond and the density in the pond will be reduced, so that the small fish can grow faster.
Hello dear, the cost of cultivating tilapia includes the introduction of fish fingerlings, renting and building sites, feeding cautious feeding, disease prevention and daily management, etc., and the average cost is about about Yuan Kuanxun to let catties. At present, the market price of tilapia is about 10000 yuan, and the profit per catty is about 1-3 yuan, and generally 2000-4000 per mu can be obtained
How long is the culture cycle of tilapia1, the culture cycle of tilapia is generally about 5-6 months. Increasing the volume of the water body, reducing the water quality and fertility, eating the aerator, and strengthening the prevention and control of fish diseases can reduce the breeding cycle of short and medium tilapia. The stocking time of tilapia fry is generally in mid-April, and the temperature gradually rises after the beginning of spring, and the best time to stocking is when the water temperature is stable at 15 or above.
2. Pay attention to the control and prevention of fish diseases, and disinfect and sterilize ponds and fish schools at intervals. 3. According to the change of weather or the growth of the fish, carry out reasonable feeding. 4. In summer, insist on opening the aerator every day, and use the agitation effect of the aerator to increase the dissolved oxygen of the water body, promote the decomposition of organic matter of the bottom impurities, and prevent the fish from floating due to lack of oxygen.
5. During the breeding period, the fish that have met the listing requirements will be cleaned out of the pond and the density in the pond will be reduced, so that the small fish can grow faster.
-
<> Pond site selection: the pond site should be selected in a place with no pollution source, convenient drainage, good water quality and sufficient sunshine, the pond should be best for sand and mud substrate, the bottom of the pond should be flat and free of impurities, keep the water depth for it, and it needs to be equipped with an aerator. Water quality culture:
Keep the water temperature not lower than 18, add quicklime to disinfect the pond before stocking, and add a certain amount of fermented fertilizer to cultivate plankton. Feed management: mainly protein feed, supplemented by green feed.
1. Tilapia farming technology
1. Pond site selection.
The area around the pond should be kept with easy drainage, no pollution sources, sufficient sunlight and good water quality. The pond should be a sandy and muddy bottom, the bottom of the pond should be flat and free of impurities, the water depth should be maintained, and it should be equipped with an aerator.
2. Clean the fish pond.
7-10 days before the stocking of fish fingerlings, the fish pond water is dried, sprinkled with quicklime for disinfection, the amount of quicklime per mu is 150 catties, a certain amount of fermented fertilizer is added to cultivate plankton, and the inlet and outlet are blocked with mesh cloth or iron yarn. During the breeding process, the water temperature should not be lower than 18.
3. Stocking fingerlings.
When the water temperature rises above 18 in March-April, stocking begins. The pond is mainly stocked with tilapia, and 2000-3000 fingerlings of 2-3 inches are stocked per mu. In the pond polycultured with silver carp and grass carp, 1000-1500 Oni fish of the same size are stocked per mu.
4. Feed feed.
The feed is mainly protein feed, and green feed is auxiliary feed. The crude protein content in the feed should exceed 25%, and the tilapia compound or wheat bran and oil can be fed once a day in the morning and afternoon. The daily feed rate is 7% of body weight before the fingerlings grow to half a tael, and it is changed to 5% after half a tael.
5. Harvest the adult fish.
After 100-120 days of feeding, adult fish can be harvested, more than 70% of the individuals can reach more than 1 city catty, and the commercial fish per mu should not be less than 800-1000 city catties.
2. Tilapia production
1. Under conventional farming, the average output of tilapia is about 1800-2000 catties, and the output is mainly related to personal breeding skills. Tilapia is a kind of tropical fish, is one of the world's aquaculture species, with fast growth, miscellaneous diet, strong adaptability, high male rate, less disease, good meat quality, high group yield, is one of the excellent aquaculture species recommended by the Food and Agriculture Organization of the United Nations.
2. Tilapia is resistant to fertilizer, low oxygen, afraid of cold and not afraid of heat, and will be frostbitten when the water temperature is 12-13, and will gradually die when the water temperature drops below 12, so it is necessary to choose water quality and fertilizer, shelter from the wind and sun, and the side with high temperature to establish a breeding reservoir, and do not put it at the tuyere of the reservoir. Under normal circumstances, except for a few areas in southern China where tilapia can naturally overwinter, other areas need to take appropriate measures to help overwinter.
-
The culture techniques of tilapia are:Before stocking, the pond should be cleaned and disinfected. Generally in the first half of April, 75 kg of quicklime per mu 100 kg of clear pond, 7 days later add water to a depth of 1 meter, and then apply 300 kg of decomposed manure per mu 400 kg, you can put a small amount of green or red weed.
Every spring, when the water temperature rises and stabilizes above 15, winter seedlings begin to be stocked. The main pond is generally stocked with 1500 and 3000 fish fingerlings per mu, and 40 and 70 silver carp and bighead carp are mixed at the same time to control water quality; When polyculture with other fish, 200 and 500 fish can be stocked per mu.
Tilapia can be fed 2 or 3 days after entering the culture surface. Tilapia has a wide range of diets, and under the conditions of artificial breeding, it can be fed with a variety of feeds, such as wheat, corn, cake meal, etc. The protein content in the feed should start at 32 35 and the daily feed amount should be 3 5 per day of the total body weight of the fish.
Tilapia habits
1. Miscellaneous food: Tilapia is an omnivorous fish based on plants. Most of the digestive tract contents of tilapia in ponds are organic detritus and other plant-based feeds (such as aquatic weeds, commercial feed, etc.), followed by phytoplankton, zooplankton and a small number of benthic animals.
2. Hypoxia resistance: tilapia has a strong ability to tolerate hypoxia, and the suffocation point is milligrams, and when the dissolved oxygen in the water is milligrams, tilapia can still live and reproduce. When dissolved oxygen in water is more than 3 mg liters, growth is not affected.
3. Not tolerant to low and high temperatures: The survival temperature range of tilapia is 15 35. When the water temperature is below 15, tilapia is dormant.
The maximum critical temperature of tilapia is about 40 41, the most suitable growth temperature is 28 32, and the breeding temperature of tilapia is above 20.
4. Strong reproduction: tilapia has early sexual maturity, short spawning cycle, oral incubation of juveniles, low requirements for reproduction, and natural reproduction in a large water area of still water. Tilapia reaches sexual maturity in 6 months and weighs about 200 grams.
-
Tilapia farming techniques include preparing ponds, rearing, selecting fry, temperature control and feed feeding.
1. Ponds
The area of the pond is 3-5 acres, and the bottom of the pond is flat. 10 days before stocking, the whole pond should be sprinkled with quicklime to clean the pond for disinfection. After 2-3 days, apply chicken manure, pig manure and other farm fertilizers per mu, and the water color will turn brown or oil green, and the fish fry can be put in.
2. Fish fry
Select the fry with good maturity and put them in the spawning pond in mid-March to strengthen the cultivation, and the spawning pond can choose the wintering pond. Generally, 6 fry per square metre of spawning ponds are stocked with males and females of 2 1 or 3 1.
3. Control the temperature
The growth temperature of tilapia is 22-32C, and the water temperature in the pond should be controlled above 23, depending on the water temperature, water quality and the growth of the fish.
4. Feed feed.
Tilapia has a strong appetite, try to make all fish species eat in a balanced manner, and its feed includes rapeseed cake, bran cake, wheat bran, peanut cake, bean cake, etc., which is best mixed. Conditionally fed tilapia full price compound feed, twice a day.
-
The cost of feeding locust bend for one acre of tilapia depends on its size and species. If it is a small tilapia, you can use ordinary fish food, such as dry feed, which is relatively low, about 10-20 yuan catty. If it is a large tilapia, you can use professional feed, such as dried shrimp, so the cost will be higher, about 50-100 yuan catty.
In addition, factors such as temperature and water quality need to be taken into account to ensure that tilapia receives the best nutritional status.
In addition to reasonable feeding, it is also necessary to: >>>More
1. Reasonably adjust the delivery cycle;
2. Adjust the cost control of different time periods; >>>More
Start slowly, don't accelerate sharply, shift gears at low speeds, don't oil the floor, Wu and others fight the red light to start, the body has a dent, please deal with it, close the window when the speed is fast, otherwise it will increase the resistance, high-end coasting, don't coast in neutral, easy to steer, brake failure, how much better, will vary greatly because of personal driving habits, finally, drive safely, do not drink and drive, do not drive fatigue, do not speed and overload, and fasten your seat belt while driving.
Hello friends, it just so happened that I also had two grass turtles, which I had raised in Brazil before. I also learned and practiced the habits and habits of many turtles. >>>More
Fengyun Audio Processing Master is a professional and comprehensive audio processing software, supporting audio cutting, audio conversion, audio merging, audio extraction, audio speed change, volume adjustment and noise cancellation and other practical functions, combined with these functions can fully meet your needs in all aspects of audio processing.