There are transverse cracks in the columns of the two story building, and the slight transverse crac

There is a 10-20 mm thick cement mortar stucco layer on the outer surface of the load-bearing column, and the transverse cracks you said only appear within this thickness, which is not actually a crack in the column, but only a crack in the stucco layer (because the stucco layer is caused by crusting or condensation, and the crack is very fine and short, it will not affect the quality of fine decoration), and the internal concrete structure of the real column will not have cracks.

So you don't have to worry about anything unsafe about the pillars or the house because of this. Although rest assured.

Joy of life! Useful.

The putty is scraped off, and there is a paper specially attached to the cracks, plus 802 glue. Just do it in the batch putty.

Summary. If it is a load-bearing wall, there will be certain safety hazards, and it depends on the specific cause of the crack.

Most of the transverse cracks are caused by the self-weight compaction mortar of the partition wall installed in the rear, but such joints are not large, only about 2m. However, there are also serious foundation settlements that lead to transverse cracks, and their cracks will even be 5mm or more. Cracks are divided into harmful and harmless cracks, and the relationship with the transverse direction of the crack should not be large.

Harmful cracks should be repaired in a timely manner, and the upper cracks should be repaired with glue. Layers can be added.

Can a slight transverse crack in the load-bearing column of the building be relayered?

If it is a load-bearing wall, there will be certain safety hazards, and it depends on the specific cause of the crack. Most of the transverse cracks are caused by the self-weight compaction mortar of the partition wall installed in the rear, but such joints are not large, only about 2m. There are also serious ground settlements that lead to transverse cracking, and the cracks will even be 5mm or more.

Cracks are divided into harmful and harmless cracks, and the relationship with the transverse direction of the crack should not be large. Harmful cracks are well sold in a timely manner, and the socks are repaired, and the cracks are repaired. Layers can be added.

Mine is a load-bearing pillar, and the walls will be much shallow.

Mine is a load-bearing pillar, and the walls will be much shallow.

Or don't add it.

If the column reinforcement will not be troublesome.

Yes. In this way, if the foundation is sinking, can it be added?

No. Or don't add it.

What's going on with such cracks in load-bearing columns.

The foundation is sinking. I've lived here for eleven years! Oh.

Summary. The reasons for this are diverse. There are many reasons for wall cracking, some cracks are just problems with the putty layer of decoration, and some cracks are serious problems such as cracking of the building foundation wall.

If this is the case, contact the property. Let him fix it for you. If you build your own house, then you should find the contractor at that time. Ask him to fix it for you, it's mostly lime cracking or something.

The reasons for this are diverse. There are many reasons for wall cracking, some cracks are just problems with the putty layer of decoration, and some cracks are serious problems such as cracking of the building foundation wall. If this is the case, contact the property.

Let him fix it for you. If you build your own house, then you should find the contractor at that time. Ask him to fix it for you, it's mostly lime cracking or something.

Summary. Hello pro 3 There are many reasons for wall cracking, some cracks are just problems with the putty layer of decoration, and some cracks are serious problems such as cracking of the building foundation wall.

Foundations are the most common cause of wall cracking. The first task in this case is to carry out the reinforcement of the sinking foundation to stop the cracks from further expanding.

Why is there a horizontal crack on the third floor of the building?

Hello pro 3 There are many reasons for wall cracking, some cracks are just problems with the putty layer of decoration, and some cracks are serious problems such as cracking of the building foundation wall. 2.Foundations are the most common cause of wall cracking.

The first task in this case is to carry out the reinforcement of the sinking foundation to stop the cracks from further expanding.

It may also be caused by subsidence, but if it is not large, it does not have much to do with it.

Common causes of vertical cracks in walls 1. Temperature cracks: relatively common, the main reason for cracks is due to the different thermal expansion and contraction coefficients of different materials. 2. Settlement joint:

The main cause of cracks is due to uneven settling of the house. 3. Structural cracks: The main cause of cracks may be unreasonable design or unreasonable use such as the actual load is greater than the design load.

These are vertical cracks in the wall, which are likely to be settlement joints caused by uneven settlement, and are generally vertical cracks on the surface of the wall. Wall vertical crack treatment 1, temperature cracks - common house cracks, has little impact on the safety of the house structure, this kind of cracks, only affects the interior appearance of the house, will not affect the safety of the house, can take some appropriate remedial measures: paste non-woven fabric, paste PVC mesh cloth or mortar to plug the joints, and then paint and repair.

2. Settlement cracks - when the settlement development is slow and there is a weakening trend after the occurrence of settlement cracks, the cracks should be repaired after the cracks are stabilized. It takes 2-5 years for the foundation of a new house to stabilize and you don't have to worry too much about the possibility that the walls will crack due to the subsidence of the foundation after the cracks are repaired. If the crack has little impact on the overall aesthetics of the house, it can be repaired after the first repair.

The repair is generally filled with cement mortar, polymer mortar or elastic putty and gypsum, and the caulking tape is pasted.