AUCMA freezer is really not good and wants to complain

Well, you can find their official **.

Freezer is a kind of professional storage tool used to store all kinds of food that needs to be frozen, so that food or other items are kept cold in a small cabinet or small room, which has an ice machine to freeze the cabinet or box with a refrigeration device, which is widely used by various industries and families. The freezer refrigeration system consists of 4 basic parts, namely the compressor, the condenser, the throttling part, and the evaporator.

Vaporization (the transformation of a liquid into a vapor) is the absorption of heat; Liquefaction (vapor into water) is the release of heat, whether it is a refrigerator or an air conditioner, it works as follows.

Low temperature and low pressure) Refrigerant (gas) Compressor (liquefied) Liquid refrigerant (high temperature and high pressure) Radiator (heat release from the surface of the refrigerator) Liquid refrigerant (low temperature and high pressure) Capillary The evaporator (copper tube around the inner wall of the box) in the refrigerator is gasified, that is, it is endothermic The temperature in the refrigerator will drop (gasification) Refrigerant (low temperature and low pressure) Compressor.

In this way, the heat in the box is moved out at the price of refrigerant from the recirculation.

The reason why the operating light of AUCMA freezer does not light up is that the running indicator light is damaged or broken; A faulty thermostat causes an open circuit.

The light bulb burned. You only need to replace the bulb of the same model, which is generally 220 volts and 15 watts.

The bulb is not on or off, which is most likely due to poor contact between the bulb and the base. If the screws, bulb and lamp pad are in poor contact, you can use a small screwdriver to pry the copper contacts in the lamp holder upwards so that they are in contact with each other. Tighten the bulb and check to adjust the spring pressure.

If the lighting circuit is broken, detect the broken line and repair it.

The green light indicated by the power supply (inside is the LED or neon bulb bead that glows after being powered on by the resistor step-down) is not on, but the power supply has been connected, because the compressor has been energized to work and refrigerate, description:

1. The indicator light is broken.

2. The connection between the step-down resistor and the lamp bead is disconnected or in poor contact.

3. The insert wire is loose or short-opened. Please check the green power indicator circuit.

Indicator light? It doesn't matter if it's on or not, the key is whether it's refrigerated or not, sometimes the system will automatically shut down after reaching a certain temperature, and when the temperature rises, it will restart.

If you take the baffle apart, you can see the light wire, which is probably the line off.

1. There may be a problem with the compressor of the freezer. This is due to the internal high pressure output of the compressor and then causing the buffer tube to break, and there is also a possibility that the screws holding the buffer tube become loose, which will cause the high-pressure pipe not to exhaust and the low-pressure pipe not to suction, so that the freezer is not refrigerated.

2. There may be a problem with the refrigeration system in the freezer, which leads to the refrigerant becoming less, insufficient or disappearing, although the compressor of the freezer is still running, but due to the lack of refrigerant or insufficient refrigerant, the temperature in the freezer does not drop. Or the capillary tube of the freezer is blocked, so that the refrigerant in the freezer cannot enter the evaporator to evaporate and absorb heat, which can also cause the freezer to not refrigerate.

3. It is possible that the compressor pressure of the freezer is too low, which causes the freezer compressor to not start. Either the voltage in your home is not enough, or the power is in a state of failure can also make the freezer not start properly. Generally speaking, the voltage of the refrigerator is 187V-242V, and the compressor of the refrigerator below 187V cannot be started normally.

The reasons for not refrigerating are:

1. The air humidity in the freezer is relatively large, while the evaporator temperature of the refrigerator is relatively low, so the water vapor in the freezer room condenses into ice because it touches the back wall of the refrigerator that is too low.

2. When the temperature of the freezer compartment of the refrigerator drops, the ice on the back wall of the freezer will melt into water, and then flow out through the drainage hole. However, if the refrigerator drain hole is clogged or the setting mode is incorrect, the water flow will not be smooth, or the ice will not melt completely, and the freezer compartment will also freeze.

3. Because the refrigerator door is not closed tightly, the water vapor in the air condenses into ice.

AUCMA freezers are not refrigerated for the following reasons.

First of all, check whether the compressor of the freezer can work normally, and whether the freon of the compressor is normal, secondly, check whether the ice cubes in the freezer are over, de-ice in time, and check whether there is a problem with the temperature sensor of the refrigerator.

First: it may be a lack of fluorine, because the refrigerant cycle of the refrigerator is to enter the freezer first and then into the refrigerator.

Second: the ambient temperature is too high, the pipeline is blocked (slightly), resulting in insufficient condensation of the condenser, and the refrigerant can not be completely liquefied, so that after the refrigerant enters the evaporator, it is possible to completely evaporate in the freezer and become a gas, and when it comes to the refrigerator, there is no state of liquid refrigerant, so that it can not be refrigerated.

Third: the temperature control knob adjustment problem, this problem is not very good to say what the situation is, you can try to adjust the knob to the first point of temperature, that is, to adjust the number on the knob to the general direction, and then observe it

Aucma freezer is not refrigerated, what is the reason, according to what you said, there are many reasons why the refrigerator is not refrigerated, the pipeline is perforated, the capillary is dirty and blocked, the lack of refrigerant, the thermostat is poor, and the compressor is not refrigerated.

If the freezer suddenly stops cooling, first check that the power supply is plugged in. Then check whether your freezer temperature setting is well adjusted, if there is nothing wrong with both, then basically the refrigerator's compressor is lacking in refrigerant.

It may be because the refrigerator is broken, you can contact customer service and ask him to fix it for you.

If it is not refrigerated, it should be a problem with the compressor.

No refrigeration reason:

1. The refrigerator thermostat is installed in the refrigerator, and the temperature of the refrigerator does not reach the temperature required by the thermostat, so it does not stop. If the compressor does not work around the clock, the freezer compartment may cause the refrigerant to reach the maximum refrigeration temperature. Most of this phenomenon occurs in air-cooled refrigerators.

The reason is that the evaporator flower froster in the cold room is broken, which produces an ice blockage. It cannot be ruled out that the air cooling fan is broken, and there are too many items in the refrigerator to block the air outlet, causing poor cooling effect.

2. The temperature of the refrigerator of the direct cooling refrigerator is automatically adjusted with the temperature adjustment of the freezer, and the temperature of the freezer can be lowered. Generally, the temperature of the refrigerator room is 4-10 degrees Celsius. Note that the higher the number of the temperature controller, the lower the temperature, the higher the number in summer and the smaller number in winter.

In addition, the refrigerator door is often opened, and there are many items in the refrigerator, resulting in the refrigerator not being refrigerated or the refrigeration effect is not ideal.

3. The reason why the refrigerator is not refrigerated may also be that there is a problem with the refrigerator compressor. The compressor can start, remove the return pipe and block the outlet with your fingers, check how much the pressure is, if it is too low, then there is a problem with the compressor The compressor can not be started, check whether the refrigerator power supply is plugged in.

4. The refrigerator thermostat is installed in the refrigerator room, and the temperature of the refrigerator does not reach the temperature required by the thermostat, so it does not stop. If the compressor does not work around the clock, the freezer compartment may cause the refrigerant to reach the maximum refrigeration temperature. Most of this phenomenon occurs in air-cooled refrigerators.

The reason is that the evaporator flower froster in the cold room is broken, which produces an ice blockage. It cannot be ruled out that the air cooling fan is broken, and there are too many items in the refrigerator to block the air outlet, causing poor cooling effect.

Dear, I'm glad to answer for you.

Hello, thank you for your attention and support to AUCMA products.

There are several reasons why the freezer is not refrigerated:

1. The temperature control adjustment is incorrect, the temperature adjustment is too low, and the high temperature control gear needs to be adjusted, generally in 3-4 gears, and 6-7 gears can be adjusted in winter, the larger the number, the better the freezing effect.

2. Refrigerant leakage, resulting in poor freezing effect.

3. If there is a problem with the compressor, it needs to be repaired and tested.

Judging from your description, it should be that the temperature control is not well adjusted. The compensation switch is opened in winter when the indoor temperature is too low, and the compressor does not work, and generally does not need to be opened.

If you still have any questions, please give us feedback at 400-618-7777

It may be necessary to replace the evaporator and condenser with copper pipes, otherwise it will break down after a long time. **Estimated at 300-350, depending on the region.

AUCMA national free service**: 4006187777, you can also call** to ask customer service first.

Excuse me, it hasn't been used for more than a year, is the manual switch next to the indicator light also turned on when turned on?

Summary. Hello, AUCMA freezer is noisy and I just bought it, reasons: 1. The freezer is not flat.

The freezer should be placed on a flat, firm place on the ground. Balance the bottom of the freezer with all four feet on a flat surface. Many freezers have a four-pronged adjustment balance knob at the bottom, which can be adjusted to the minimum noise level.

If there is no balance knob device, you can add a rubber pad at the foot of the freezer to achieve balance and minimize noise.

2. The pipeline and box are not reinforced.

It is necessary to check whether the connection and reinforcement part between the adjustment outer pipeline and the box is loose, so as to avoid resonance when the compressor is working. Therefore, the outer pipeline must be fixed, and the bolt should be added with a spring washer to prevent loosening.

What's the reason for the noise of AUCMA freezers? Just bought.

Hold on. Hello, Austrou Slip Yu Coma freezer is noisy and just bought, reasons: 1. The freezer is not flat.

The freezer should be placed on a flat, firm place on the ground. Balance the bottom of the freezer with all four feet on a flat surface. Many freezers have a four-pronged adjustment balance knob at the bottom, which can be adjusted to the minimum noise level.

If there is no balance knob device, you can add a rubber pad at the foot of the freezer to achieve balance and minimize noise. 2. The lumen section and the box are not reinforced. It is necessary to check whether the connection and reinforcement part between the adjustment outer pipeline and the box is loose, so as to avoid resonance when the compressor is working.

Therefore, the outer pipeline must be fixed, and the bolt should be added with a spring washer to prevent loosening.

3. The compressor base is not firm, if you press the compressor tightly by hand, the noise is significantly reduced, and the noise of the hand is increased, which is generally caused by the uneven force of the compressor base fixed damping rubber pad or loose bolts, and the compressor bottom plate is not firm, so the connecting part of the bolt should be adjusted and tightened and the washer that has lost its elasticity should be replaced.

What's the reason for the noise of AUCMA freezers? Just bought.

1.Compressor noise. Ordinary domestic compressors with low grade will have a certain amount of noise, which will not affect the use under normal circumstances, and will not affect the rest.

If there is an irregular noise, or if it is too loud, consider replacing the compressor. The clicking sound when starting and closing is the relay action of the automatic switch and is normal. 2.

Several support legs of the refrigerator are in direct contact with hard floors such as tiles, which will amplify the vibration and produce noise. You can place a piece of hard rubber under the support foot, such as an old cloth sole, or if you are looking for a bicycle repairer, you can cut it into small pieces on the pad, not too thick, not more than 5 mm thick. 3.

The most common increase in noise caused by moving the refrigerator is the heat pipe behind it. When the heat pipe is squeezed and deformed, it is easy to increase vibration and produce noise. When the refrigerator is just started, touch it with your hand and then heat the heat pipe, which is the source of noise when the vibration in the shirt is strong**.

Note that don't leave it open for a long time and then touch it, it's very hot. Fix the vibrating heat pipe and the stable heat pipe together with electrical tape, fix each section, and generally fix two or three places to greatly reduce the noise. As long as the ordinary refrigerator is refrigerated, the noise level basically does not affect the service life, but only affects people's psychology.

Unless the new refrigerator is a supermodel like Haier, the other brands are almost all of them.