Where is the problem that the little swan washing machine does not spin

The little swan washing machine washes clothes normally, sometimes dehydration is normal, and sometimes it keeps buzzing when dehydration, the speed is slow, the dehydration does not dry, open the door, turn the inner cylinder in reverse with your hands, and sometimes it can be dehydrated normally?

4. Loose motor plug:

The connecting wires of the drum washing machine are all made of connectors, which often cause the motor plug to loosen or the insert to be ejected during installation due to vibration and other reasons. If the plug is loose, it is recommended to replug it in and then tie it tightly with a strapping cord to prevent it from falling off again.

5. Motor overheating:

Due to the occurrence of overload or stalled rotation, it will cause the motor to heat up, and then when the motor thermal protector is working, the washing machine will not be dehydrated, and you can use it patiently and wait for the thermal protector to reset.

If the computer control board of the washing machine is faulty, you can only find a professional maintenance personnel to replace it. This answer applies to most of the washing machine models of Little Swan.

There could be several reasons for this:

1. The washing is in an unbalanced state during washing.

When there are too many clothes, the washing can not be adjusted to the balance, then the washing machine will automatically adjust to a low speed to cause poor dehydration effect, if this is the reason that the washing machine can not be dehydrated, then do not worry too much, you can put the number of clothes less before washing the clothes, do not stuff too much at once, so as not to cause imbalance during washing, and affect the dehydration effect is not good.

2. The safety switch on the top cover of the washing machine is damaged.

The process of dewatering the washing machine is a mechanical movement that operates at high speed. Try not to open the top cover during the dehydration process to avoid damage to the top linkage switch, if the top cover linkage switch of the washing machine is damaged, the washing machine can not be dehydrated. Reminder:

To avoid causing the washing machine to not be able to dehydrate, do not open the top cover when watching the dehydration process of the washing machine.

3. Caused by the texture of clothing.

Compared with summer, there are many types of clothes in winter, such as tweed type of clothes with strong water absorption, if you choose low-speed dehydration, it will cause the illusion that the washing machine can not be dehydrated, so it is recommended to use high-speed dehydration for washing products with strong water absorption performance (PS: high-end clothes can not be used for high-speed dehydration).

4. The drainage system of the washing machine is blocked.

When the drainage system of the washing machine is blocked, the washing liquid in the water cylinder can not be discharged, when there is too much foam in the water cylinder, or the washing liquid in the cylinder is difficult to drain for a while, the water level switch can not be reset, and the washing machine cannot enter the dehydration program. If the washing machine cannot be dehydrated due to this reason, it is recommended to remove the drain filter for cleaning, rinse the drain with water and remove the debris in the drain valve.

5. The water level switch cannot be reset.

The dewatering process of the washing machine starts after the washing liquid has been drained and the water level switch is reset. If the drain level switch is damaged, dewatering is a procedure that needs to be carried out after draining, and if the water level switch is damaged, you will not be able to enter the dewatering process.

Summary. Dear, I'm glad for your problem, the reasons and solutions for the little swan washing machine not to dehydrate are as follows: 1. Poor contact, the little swan washing machine can't get rid of water, probably because of poor contact, check the power switch, if the washing machine is connected to the electric heating program adjusted to the dehydration state, use your hand to reduce the safety switch brake alarm to the minimum, if the washing machine computer alarm display digital tube is "e1", it means that the safety switch or the computer board has a problem, just change it to a new one.

2. Switch aging, which will be affected by heat, water, light, and chemical substances during the use of polymer materials. If there is a problem with the power switch, you can use your hands or tools to brake the safety switch in normal dehydration conditions. If the power-off distance of the safety switch has been low, then it is best to replace a safety switch 3, drain valve problem, if the washing machine is in the dehydration state, only the wave wheel rotates and does not rotate, then check whether the pawl and ratchet separation of the traction clutch are separated, if not, it may be that the adjusting rod or nut of the drain valve is loose or worn, resulting in insufficient opening distance.

That's all for me, I hope mine can help you.

Dear, I'm glad for your problem, the reasons and solutions for the little swan washing machine not dehydration are as follows: 1. Poor contact, the little swan washing machine can't get rid of water, probably because of poor contact, check the power switch, if the washing machine is connected to the electric heating program adjusted to the dehydrated state, use your hand to reduce the safety switch brake alarm to the minimum, if the washing machine computer alarm display digital tube is "e1", it means that the safety switch or the computer board posture refers to the problem, just change a new wild book. 2. Switch aging, which will be affected by heat, water, light, and chemical substances during the use of polymer materials.

If there is a problem with the power switch, you can use your hands or tools to brake the safety switch in normal dehydration conditions. If the power-off distance of the safety switch has been low, then it is best to replace a safety switch 3, drain valve problem, if the washing machine is in a dehydrated state, only the wave wheel rotates and does not rotate, then check whether the pawl and ratchet of the traction clutch are separated, if not, it may be that the adjusting rod or nut of the drain valve is loose or worn, resulting in insufficient opening distance. That's all for me, I hope mine can help you.

I turned on the drain underneath and screwed it on again to prevent it from dehydrating.

Tighten a little, if you don't tighten the machine is not able to work, you can screw it and then disconnect the power supply and try again, if it still can't, it is the control board, so only the spinal barrier needs to apply for offline maintenance to give you socks to take care of.

There have been similar problems before, I opened and tightened it, it's fine, this is the second time I opened it, no matter how tight it is, it won't be dehydrated, what should I do.

Repair the control board, the reason why the identification error caused by the poor removal of the control board cannot be repaired.

1. The laundry is unbalanced, when the washing cannot be adjusted to the balance, the washing machine will automatically set a low speed, and the dehydration effect will be slightly worse at this speed.

2. The switch of the top cover is damaged, and the washing machine is not allowed to open the top cover because it is a high-speed action when it is dehydrated.

3. Clothing texture, washing with strong water absorption performance is recommended to use high-speed dehydration (some high-end clothes cannot be selected for high-speed dehydration).

4. The drainage system is blocked.

5. The water level switch cannot be reset.

6. The computer control board is faulty.

In home life, the washing machine is a must-have electrical appliance, it has a variety of functions, not only can soak and wash clothes, but also dehydrate clothes, dry clothes, etc., which can speed up the drying of clothes. In use, the body of the washing machine is prone to failure, if the Little Swan washing machine has the problem of not dehydrating, what is the reason for this? Let's take these questions today and learn about the relevant content together!

It may be caused by the imbalance of the clothes inside the fuselage; It may be that its drainage system is clogged and it cannot be dehydrated properly; It may be that its water level switch is faulty and cannot be reset normally; It could also be that the switch on the top of it is damaged, or the drain solenoid is faulty, preventing the washing machine from dehydrating.

What are the reasons why the washing machine is not damaged and does not dehydrate.

1. The location of the drainage pipe is wrong.

During installation, if the drainage pipe is installed at a higher position, it is easy to have no dehydration and normal drainage when draining. If the drain pipe is blocked, the washing machine may not be dehydrated, and if this is the case, the drain pipe needs to be unblocked to remove the blockage inside.

2. The lid of the washing machine is not covered.

When the washing machine is cleaned, if its cover is not properly covered, some washing machines will make abnormal noises, and it will affect its dehydration work, resulting in the inability to dehydrate.

3. The dehydration process is converted into rinsing.

When the washing machine is working, the clothes in the bucket are unbalanced and entangled, which makes the washing machine protect itself and jump directly from dehydration to rinsing.

4. Overheating protection.

If the washing machine has been overloaded and old, then its motor will activate overheating protection, and the washing machine will not be able to dehydrate. In this case, we only need to reduce the amount of washing in the washing machine, and it will generally work normally after a while.

The Little Swan washing machine does not dehydrate due to the following reasons:

1. Washing machine failure: If the Little Swan washing machine fails, such as motor damage, unbalanced dehydration bucket, etc., it will lead to no dehydration.

2. The washing machine is overloaded: If the laundry is overloaded at one time, it will cause the washing machine to be unbalanced when dehydrating, so that it will not be dehydrated.

3. Washing machine drain pipe blockage: If the washing machine drain pipe is blocked, it will cause the washing machine to not discharge water normally, so as not to dehydrate.

4. Washing machine setting problem: If the setting of the washing machine is incorrect, such as improper setting of dehydration time and dehydration speed, it will also lead to non-dehydration.

For the problem of not dehydrating the Little Swan washing machine, you can try the following methods to eliminate and solve it:

1. Check the failure of the washing machine: check whether the washing machine is faulty, such as whether the motor is working normally, whether the spin bucket is out of balance, etc.

2. Adjust the load of the washing machine: adjust the load of the washing machine to avoid the excessive load of the laundry at one time, and the imbalance of the washing machine caused by the lead in the guide hole.

3. Clean the drain pipe: Clean the drain pipe of the washing machine to ensure smooth drainage.

4. Adjust the settings of the washing machine: check whether the settings of the washing machine are correct, such as whether the settings such as spinning time and spinning speed are appropriate.

If the above methods cannot solve the problem, it is recommended to contact Little Swan after-sales service or professional maintenance personnel for inspection and maintenance. At the same time, when using the washing machine, it is necessary to pay attention to the maintenance and maintenance of the Huai Liang to avoid faults and safety problems.

Motor failure: If you hear a humming sound but the inner cylinder does not rotate after the power is turned on, then it may be that the motor is short-circuited or damaged between turns, or the capacitor is not connected to the chain trace office motor circuit, and the motor needs to be repaired or replaced.

Faulty water level sensor: If the water level sensor fails, then the washing machine will not be able to detect the water level and will not be able to perform the dewatering operation. It is necessary to check whether the resistance value of the inductance coil in the water level sensor is normal, whether the built-in spring is dislocated, whether the rubber diaphragm and air guide line are leaking, etc., if there is a problem, the water level sensor needs to be replaced.

Faulty board: If the board fails, the dewatering operation cannot be controlled properly, resulting in poor dewatering or no dehydration at all. It is necessary to check whether the signal line between the electronic control board and other components is broken, or use a multimeter to measure whether the various components of the electronic control board are working properly, and if there is a problem, the electronic control board needs to be replaced.

Blockage between the inner drum and the outer barrel: If there is a build-up of dirt or foreign matter between the inner drum and the outer barrel, it will cause the inner cylinder to not rotate properly, which will affect the dehydration effect. It is necessary to clean the dirt or foreign matter between the inner cylinder and the outer barrel to keep it clean and smooth.

Wrong choice of washing program: If you choose a washing program that is not suitable for dewatering operations, such as a quick wash or a gentle wash, the dewatering effect will be affected. Depending on the material and the degree of stains, you need to choose the right washing program.

Laundry that is too heavy or unbalanced: If the laundry is too heavy or unbalanced, it will cause the washing machine to run unbalanced, unable to enter equilibrium and unable to dehydrate. It is necessary to reduce the number of clothes or adjust the distribution of clothes to make them evenly balanced.

Insufficient water pressure: If the water pressure is insufficient, it will affect the normal operation of the drain valve, thus affecting the dewatering effect. It is necessary to check whether the water inlet and drain pipes are unobstructed, or adjust the degree to which the faucet is opened and closed.

1. The drainage pipe is blocked or the drainage solenoid valve is faulty.

Check whether the adjusting rod nut on the drain valve is loose, causing the tractor to not open the drain valve core, resulting in poor drainage. At this point, fix the nut and open the drain valve spool.

2. The computer board may be damaged.

The computer board problem causes no drainage, and the computer board usually needs to be repaired or replaced, so it is recommended to contact a professional maintenance personnel for on-site repair. Repent of this.

3. The brake is not released.

The motor could not be started due to excessive load. At this point, when a buzzing sound is heard, adjust the tie rod of the drainage method.

4. Some models should check whether the traction cable is loose with the drain valve.

If the nut is not loose or the Labi Cord is not loose, the retractor may be damaged and cannot open the drain spool, at which point the retractor should be replaced.

5. The drainage system of the washing machine is blocked.

When the washing machine's drainage system is clogged, the washing liquid in the water tank cannot be discharged. When there is too much foam in the bucket or the washing liquid in the bucket is temporarily difficult to drain, the water level switch cannot be reset and the washing machine cannot enter the dewatering program. If the washing machine cannot be dehydrated, it is recommended to remove the drain filter for cleaning, flush the drain with water, and remove debris from the drain valve.

6. The washing material is in an unbalanced state during washing.

When there is too much laundry, the washing cannot be adjusted to balance, and then the washing machine automatically adjusts to a low speed, resulting in poor dehydration results. If this is the reason why the washing machine cannot be redrafted and dehydrated, then there is no need to worry too much, you can put less clothes before washing, and do not suddenly stuff too much, so as not to cause uneven washing and poor dehydration effect.

7. The texture of the clothes.

Compared to summer, there are many types of winter clothes, such as wool clothes that are highly absorbent. If you choose to spin at a low speed, it will create the illusion that the washing machine cannot be dehydrated.