Why is my computer stuck playing Ultraman Fighting Evolved 3?

First things first: the memory is too small.

Again, video memory is not enough.

Finally, there is the configuration of the simulator.

In addition to installing software and so on, it is best to have 4GB left for this game, it is recommended to change to 8 or 10GB of memory, and the video memory is 8600GT

hd4000

GT220 or higher can be played very smoothly.

Mainly CPU: preferably above.

Tools Needed: PSx2 Emulator (Spider-Man.

Version of the Confession Banquet), Ultraman.

Combat Evolved 3.

1. Open the PCSX20 999 extreme value software professional.

2. Click config to enter the plug-in configuration genus, and then select image to enter the settings.

3. Select 800x60060Hz display, DX9 rendering, check the boxes of linear filtering, logarithmic operation, channel correction, and window mode, and click OK after the setting is completed.

4. Go back to setting the CPU, check vu0rec compiler, vu1rec compiler, multithreading.

mode, double Bifeng silver core mode.

5. After all the settings are completed, you will not be stuck by the base when you re-enter the game.

Summary. Hello,Computer Quick Bar Game Ultraman Evolution Fighting 3 Black Screen is an automatic shutdown caused by the high temperature caused by poor CPU heat dissipation,The specific performance is to play games,Watching movies and other operations with high CPU occupancy,10 20 minutes or so, the computer automatically loses power without any warning。 Even when the system is reinstalled, it will be automatically turned off.

Rebooting often also shuts down automatically, and you need to wait a while to turn it on again before you can enter the system normally.

Hello,Computer Quick Bar Game Ultraman Evolution Fighting 3 Black Screen is an automatic shutdown caused by the high temperature caused by the poor heat dissipation of the vertical hand Chang CPU,The specific performance is to play games,Watching movies and other operations with high CPU occupancy,10 20 minutes or so, the computer automatically loses power without any warning。 Even when the system is reinstalled, it will be automatically turned off. Rebooting often also automatically turns off the potato, and you need to wait for a while to turn it on again before you can enter the system normally.

Here's how to solve the problem here:1First of all, turn it off, remove the CPU heat sink, remove the fan on the base beat heat sink, clean up the dust, flick the fan blades to see if it rotates smoothly, if it is difficult to rotate, uncover the label on the back of the fan to see the bearing, add a small amount of lubricating oil dropwise and then paste it.

2.Go to the computer repair area and ask for some silicone grease (something that is white and thick, like toothpaste). Wipe the old silicone grease on the heat sink and CPU with a paper towel, evenly apply the new silicone grease, not too thick, and reinstall the heat sink orange and fan.

Problems can usually be solved. If you don't have the ability to do it yourself, you can directly take the machine to the place where the computer is repaired, let him use a blow gun to blow the dust inside the case for you, and then ask him to help you change the silicone grease. 3.

If the problem is alleviated after replacing the silicone grease and removing the dust, but occasionally there will be an automatic shutdown. Then you are experiencing the same problem as me: the CPU heatsink is too tight or too loose, or the force is uneven.

If the temperature exceeds 70, then untie the CPU buckle to observe, if the temperature is normal, the heatsink is installed too tightly, resulting in insufficient contact with the CPU. If it is more serious when the buckle is loosened, then the heat sink is too loose. If it is too tight, use a screwdriver to loosen the screws on the heatsink base on the motherboard, and if necessary, use a piece of paper to raise it a little at the bottom.

However, it should be noted that all four screws must be tightened, otherwise it will cause uneven installation of the heat sink.

Summary. Answer: For this problem, it may be that the hardware configuration of the game is not high enough, which causes the game to run slower, which causes the character to move slower.

The solutions to this problem are:1First of all, check the hardware configuration of the game to ensure that the hardware configuration of the game meets the minimum requirements of the game to ensure the normal operation of the game.

2.Secondly, check the software configuration of the game to ensure that the software configuration of the game meets the minimum requirements of the game to ensure the normal operation of the game. 3.

Finally, check the network configuration of the game to ensure that the network configuration of the game meets the minimum requirements of the game to ensure the normal operation of the game. If the above three steps don't solve the problem, you can try reinstalling the game to make sure the game is working properly. In addition, you can also try to update the game for a better gaming experience.

Answer: In response to this problem, it may be that the hardware configuration of the game is not high enough, which causes the game to run slower, which leads to the slower movement of the characters. The solutions to this problem are:

1.First of all, check the hardware configuration of the game to ensure that the hardware configuration of the game meets the minimum requirements of the game to ensure the normal operation of the game. Megalimb 2

Secondly, check the software configuration of the game to ensure that the software configuration of the game meets the minimum requirements of the game to ensure the normal operation of the game. 3.Finally, check the network configuration of the game to ensure that the network configuration of the game meets the minimum requirements of the game to ensure the normal operation of the game.

If the above three steps don't solve the problem, you can try reinstalling the game to make sure the game is working properly. In addition, Brother Chaiwang can also try to update the game for a better gaming experience.

Can you tell us more about that?

This problem can be said to be due to the technical limitations of the game. Due to the limited skill level of the game, the characters in the game will be slower. In addition, the design of the game will also affect the movements of the characters in the game, for example, the movements of the characters in the game may be affected by factors such as the perspective of the game, the distance of the camera, etc., resulting in slow movement of the characters.

In addition, the hardware configuration of the game will also affect the movements of the characters in the game, for example, the higher the hardware configuration of the game, the smoother the movements of the characters in the game, and conversely, the lower the hardware configuration of the game, the slower the movements of the characters in the game. Finally, the network environment of the game will also affect the actions of the characters in the game, for example, the better the network environment, the smoother the movements of the characters in the game, and conversely, the worse the network environment, the slower the movements of the characters in the game. In conclusion, there are many reasons why the characters in the game are slow, such as technical limitations, game design, hardware configuration, and network environment.