How to use NFC access control on mobile phones, how to use access control cards for NFC on mobile ph

If you are using a Huawei smartphone, you must meet the following requirements to add an access card:

1. Make sure that the NFC of the mobile phone is turned on and the network status is normal;

2. Check whether the phone supports it;

Please do it according to your wallet version:

To check the wallet version: Wallet > My > About.

1. HUAWEI Wallet version or above:

1. Go to HUAWEI Wallet > Smart Card > Access Control Card, and go to the Add Access Card page.

2. Click on the simulated physical access control card, paste the physical door card on the NFC sensing part of the mobile phone, and automatically simulate the access control card after the card is successfully read.

3. Simulate the style and name of the access card after success, and then click Finish to add successfully.

2. Huawei Wallet Version:

1. Go to HUAWEI Wallet > Card Wallet > Access Control Card, and go to the Add Access Card page.

2. Click on the simulated physical access control card, paste the physical door card on the NFC sensing part of the mobile phone, and automatically simulate the access control card after the card is successfully read.

3. Simulate the style and name of the access card after success, and then click Finish to add successfully.

3. Huawei Wallet versions are as follows:

1. Go to the HUAWEI Wallet > Card Wallet > Key, and go to the Add Key page.

2. Click Simulation, paste the physical door card on the NFC sensing part of the mobile phone, and automatically simulate the door key after the card reading is successful.

3. Simulate the style and name of the door key after success, and then click "Finish" to add successfully.

Put in the phone, swipe the phone to open the door.

3.Paste the physical access card on the NFC sensor part of the mobile phone, and automatically simulate the access control card after the card is successfully read.

4.After the simulation is successful, the style and name of the access control card, click Complete, and add successfully.

Reminder: When you use your HUAWEI ID, you will be prompted whether to keep your wallet card on your current device. If you choose to keep it, you can use it normally after logging in to your account again. If you select Not to keep, the access card will be deleted from the current device.

Take Huawei P40, the system as an example, how to use the NFC access card of the mobile phone:

1. First of all, the mobile phone needs to support NFC function;

2. Click on the "Wallet" app on the desktop, enter the wallet interface and click on the "Swipe Card" option on the home page;

3. Click "Add Now" and select the "Key" option;

4. Click the simulation button behind the "Simulated Physical Access Control Card", the mobile phone will display the ready to read the card, and then put the access control card on the back of the mobile phone in the position of NFC, and click to complete after the card is successfully read.

After the access card is added successfully, the access card will be automatically added to the mobile phone. After adding, you can set the name of the card to make it easier to distinguish the purpose of multiple access cards. Then click "Done".

The NFC mode of the mobile phone is to simulate the device with NFC function into a contactless card, such as an access control card, bank card, etc. In this way, the card is powered by the RF domain of the contactless reader, which can work even if the NFC device is out of power.

This answer applies to most of Huawei's phone models.

If you are using a vivo mobile phone, it means copying the physical access card, and the following is how to do it:

1. Go to Mobile Settings - Other Networks and Connections More Settings - NFC - Turn on the switch of NFC and NFC card reader, then enter "Touch to Pay", and set the default payment method to "Vivo Wallet";

2. Enter vivo wallet - access card - enter physical access card;

3. According to the prompts, the non-encrypted physical access control card is close to the NFC induction area of the mobile phone for card reading;

4. Wait for the card reading to be added.

Scan the door with your phone***.

How to apply for an access card without NFC function on the mobile phone? Taking Huawei mobile phone P40 and EMUI10 systems as an example, the mobile phone does not have NFC to swipe the access control card

2. RFID-SIM mobile phone card:

When holding a mobile phone with RFID-SIM card, you can directly open the door of RFID-SIM access control system. RFID—SIM can transmit the physical ID directly to the access controller, compare and check it with the confidence (whitelist) stored in the access control system, and then control the status of the door. But the premise is that the door and the mobile phone card must be RFID-SIM system at the same time, otherwise it will not be able to open normally.

3. Use a bracelet with NFC function:

Query and select the relevant bracelet that can be supported by an access control system, and you can unlock the access control controller through the bracelet. Nowadays, more and more smart bracelets can replace the NFC function in mobile phones and conveniently open the door with an access control system.

This answer applies to most brands of mobile phone models such as iPhone, Huawei, Xiaomi, OPPO, etc.

The NFC function on mobile phones, or near-field transmission, is a short-range, high-frequency wireless communication technology that enables back-to-back data transmission between electronic devices (without turning on Bluetooth). Here's how to turn on the NFC function on your phone:

Settings - Connect (Connect & Share) - NFC - Swipe right to show green to turn on, (some mobile phone operation methods: Settings - More Settings - NFC); Swipe left to show gray to turn off the feature.

Note: When the NFC function is turned on, one will appear at the top of the phone screen"n"Icon.

This one, as long as you can turn on the NFC function and then add the access control card, and then copy your access card to the mobile phone to use, you only need to be close to the place where the access control card is swiped.

How to set up NFC access control card on mobile phone: In order to ensure the safety of owners, many communities will install access control, but the access control card is too small, and many times it will be forgotten or lost, causing a lot of unnecessary trouble. In fact, we can replace the access card with the NFC function of the mobile phone, so that we can save a lot of trouble.

It is also very simple to set up the NFC access card on the mobile phone, you only need to find the door card or NFC function in the wallet on the mobile phone, and then put the access card on the NFC sensor on the back of the mobile phone, click "Start detection", and the information of the access card will be successfully entered into the NFC after the detection is successful.

Utilize mobile NFC to simulate access cards.

If you are using a vivo mobile phone, it means copying the physical access card, and the following is how to do it:

1. Go to Mobile Settings - Other Networks and Connections More Settings - NFC - Turn on the switch of NFC and NFC card reader, then enter "Touch to Pay", and set the default payment method to "Vivo Wallet";

2. Enter vivo wallet - access card - enter physical access card;

3. According to the prompts, the non-encrypted physical access control card is close to the NFC induction area of the mobile phone for card reading;

4. Wait for the card reading to be added.

About how to use the NFC access card on the mobile phone, first you need to install the corresponding NFC receiving function on the access control, and then turn on the NFC function of the mobile phone to use it.

After the NFC function of the mobile phone is turned on, add a copy of the physical access control card, and then use the NFC function of the mobile phone to sense the access control.

Mobile phone NFC access control card, there should be a ***, scan it, and then identify it on the mobile phone.

How is it used? How do I feel this access card is used? In general, it can be used by plugging it in.

If you are using a vivo mobile phone, you need to meet the following conditions:

Make sure that the NFC function is enabled and the payment method is vivo wallet.

It is necessary to guarantee that the fixed frequency band (and unencrypted conditions) are met.

The current network is good.

The steps to add an NFC access card are as follows:

2. Then enter the vivo wallet access card page and select the type of card you need to open;

3. Hold the non-encrypted physical access card close to the NFC antenna of the mobile phone to read the card;

4. Complete the identity verification according to the prompts on the page to write the card, and then you can add the access control card.

Utilize mobile NFC to simulate access cards.

Light up the NFC function, open the wallet to add a virtual transportation card, generate an NFC serial number and add it to the access control authority, the following are the specific operation steps:

Tools Raw Materials:

iphone12

Setting 1: Click NFC

Go to the general settings page and click on the "NFC" function.

2. Lighting function.

Light up the "NFC" function.

3. Add a virtual card.

Go to the iPhone wallet page and click Add Virtual Transportation Card.

4. Activate access control.

Swipe the NFC serial number on the access card reader to add the serial number to the access control permission.

When the NFC access card of vivo mobile phone is in use, you can automatically wake up the door key interface by double-clicking the power button or close to the access control card machine, select the access control card you need to use, and close the NFC antenna to the card sensing area to unlock it.

This can be there Mine is a vivo mobile phone There is a vivo wallet in it There is a swipe card here Scan the keychain of the access control card with a camera lens After completion, click to swipe the card and put the mobile phone camera close to the identification area to swipe the card into the door.

This shouldn't work, the access control card should be a special card reader to write the card **, so that the door card recognition system can identify, and NFC should not have this function.

The iPhone uses NFC to realize the access card function.

If you are using a vivo mobile phone, the NFC access card is a function provided by vivo wallet to simulate the physical door card, using the vivo mobile phone that supports near-field communication technology (NFC), the physical door card can be simulated into the mobile phone to realize the mobile phone swipe key card service.

Here are some things to try:

First, the method of copying the physical access control card:

1. Go to Mobile Settings - Other Networks and Connections More Settings - NFC - Turn on the switch of NFC and NFC card reader, then enter "Touch to Pay", and set the default payment method to "Vivo Wallet";

2. Enter vivo wallet - access card - copy physical access card - click "go to open card";

3. According to the prompts, the non-encrypted physical access control card is close to the NFC induction area of the mobile phone for card reading;

4. Wait for the card reading to be added.

2. The method of opening an online access card is as follows:

1. Confirm that the community access control card is the access control provided by the access control providers of Qinlin Technology, Neighborhood Neighborhood, and Xiangyunmen (you can query the supported community information through the door card addition page);

2. Confirm the owner's information such as the mobile phone number that has been reserved at the property office of the community;

3. First of all, go to the mobile phone settings - other networks and connections - NFC - turn on the NFC switch and NFC card reader switch, and set the payment method to vivo wallet.

4. Select the community that needs to be opened and enter the mobile phone number to verify the permission;

5. After the verification is passed, enter the card writing link and complete the activation.

Currently, the following models support the use of NFC access cards: iQOO Z6, iQOO Z6X, IQOO 10, and IQOO 10 Pro

T2X, S15, S15 Pro, iQOO Neo6 SE, X80 Series, S15E, iQOO Neo6, X Fold, X Note, iQOO 9 iQOO 9 Pro

s12/s12 pro、iqoo neo5

S, X70 series, iQOO 8 iQOO 8 Pro, S10 Pro, X60T Pro+, iQOO Neo5 Vitality, X60 Curved Screen, X60T, iQOO Neo5, S9, S7T, IQOO 7

X60 X60 Pro X60 Pro+, Y53S (NFC version), IQOO 5

series, iQOO neo3

iQOO 3, S7, X50 series, X30 series, NEX 3S, NEX3 series, iQOO Pro, iQOO, iQOO Z1 and X27 Pro