How to install an external memory card on Redmi Note3?

The Redmi Note3 Dual Netcom version is a MediaTek processor and does not support direct insertion of memory cards to expand memory, so it is not possible to install external memory cards.

The full Netcom version of the Snapdragon processor only supports external memory cards.

Full Netcom version Redmi Note3 Install external memory card:

Card slot 1 supports Micro-SIM cards, and card slot 2 supports nano-SIM cards and micro SD expansion cards.

SIM card 1 uses a Micro-SIM small card, while SIM card 2 can be used to install a nano-SIM mini card or as a TF storage expansion card, supporting up to 128GB of storage.

1. Turn off the mobile phone and prepare to take out the card slot.

2. Insert the card pin into the small hole on the side of the phone, and the card slot pops up.

3. Put the prepared memory card into a specific position in the card slot, and then insert the card tray with the SIM card into the Redmi 3 card tray vertically.

4. The mobile phone is stuck in the machine, and the mobile phone memory expansion memory is completed.

After installing the memory card, the apps in the phone cannot be installed on the memory card, and the MIUI system has not allowed the installation of apps to the SD card. Force transfer installation, as long as the phone restarts, the apps installed on the SD card will disappear, and it will also increase the frequency of crashes.

Redmi Note3 does not support extended memory cards.

The Redmi Note3 Dual Netcom version is a Mediatek 100 processor. It doesn't support the ability to insert memory directly into the memory card to expand the memory, so it can't install an external memory card.

The Redmi Note3 comes in an all-metal case and is the first device under the Xiaomi brand to be equipped with fingerprint recognition and Square hardware. The Redmi Note3 will be powered by a 2GHz MT6795 dual-core processor with 5 million pixels on the front and 13 million pixels on the rear, and will be equipped with a dual-color warm flash.

Redmi Note3 does not support extended memory cards.

The Redmi Note3 has 16GB 32GB of mass storage, but it does not support memory cards.

Redmi Note3 does not support extended memory capacity, that is to say, Redmi Note3 does not support external memory cards, so Redmi Note3 does not have a memory card slot, and cannot be used for memory.

1. Turn off the handle, turn it over to the side, and use the card pin to fix the small hole in the card slot, and the card tray will automatically pop up, as shown in the figure below.

2. Remove the pop-up card tray, as shown in the figure below.

3. Put the SIM card according to the shape of the card tray, as shown in the figure below.

4. Put the SIM card and then push the card tray into the card slot, as shown in the figure below.

Redmi Note3 does not support capacity expansion, so it cannot be equipped with a memory card.

Yes, it is the same as most brands of mobile phones now, taking the card slot two-purpose method, one of the two SIM card slots can be used to install memory cards or mobile phone cards.

Hello, this phone does not support memory card expansion, so you can't install a memory card.

Redmi Note3 High Standard Dual Netcom Edition does not support external memory cards, only Redmi Note3 High Standard Full Netcom Edition supports external memory cards, and the memory card is placed in the mobile phone card slot, occupying a mobile phone card slot.

Redmi Note3 does not support the installation of memory cards.

Yes, you can choose 2 SIM card slots from 3 options, you can put 2 SIM cards, or you can give up a free SIM card slot to a micro SD expansion memory card.

Redmi Note3 Dual Netcom Edition does not support the use of memory cards.

Redmi Note3 Full Netcom version, support the use of TF memory card, up to 128GB.

Full Netcom is OK, but nothing else is OK.

Here's how:

Locate the location where the memory card was installed.

2.Insert the needle into the small hole, and the card slot will pop open automatically.

3.After taking out the card tray, insert the SD card into the card tray in the direction of the card tray. There is no trick to install it, and you can just put it in. Because this card tray is designed for SD card style.

4.This is what it looks like after installation.

5.Then put the card tray into the mobile phone card slot, and press it to turn on. If you enter your phone and take a look, you can identify this SD card.

The Redmi Note4 memory card is installed in the outer card slot, with the card side facing up.

The Redmi Note4 adopts a dual card slot design, in which the card slot near the inside is used to install the MicroSIM card, and the other card slot is used to install the NanoSIM mobile phone card or memory card. Install as shown in the figure below

When placing the memory card, remember to place the chip side up.

The specific parameters of Redmi Note4 are as follows:

Eject the card slot, the empty ** card on the inside, and the TF memory card on the outside.

Open the left card slot with a needle, put the memory card as shown in the figure, and return to the position.

Make friends E, make a few long B periods.