How to make a flower pot for a laundry detergent bucket, how to make a flower pot for a laundry dete

The bucket of laundry detergent can be used to make flower pots, and if you want to make what kind of flower pots, you need to use your imagination, such as making swan shapes, heart shapes, etc., and you must have a certain amount of craftsmanship. But to use laundry detergent buckets to make flower pots, first think about what flowers to plant, and choose laundry detergent buckets of different sizes according to the size of the flowers, so that the root system has enough room to grow. As for how to make a flower pot for a laundry detergent bucket, let's take a look:

1. First of all, prepare a waste laundry detergent bottle in advance, and use a soft brush to clear the logo on it (tips, you can use a hair dryer to blow it hot, you can tear it off) as shown below

2. Draw the shape of the glass bottle to be laser cut (you can see the picture below: whale look) and use a wallpaper knife to carry out laser cutting along the drawn line. Be careful here.

3. After the laser cuts out the whale shape, you can use a fruit knife to press the edge, or use sandpaper to polish it, which looks smoother.

4. If the natural talent show is better, it can draw the eyes of the dolphin and the water waves.

5. Put in the cultivation soil and the green plants you want to plant, and you can work to make money.

The above is a potted flower pot made of waste plastic bottles, have you learned it? All kinds of shapes are possible, and naturally everyone needs to show their own artistic creativity on the spot.

The laundry detergent bucket is a simple way to transform a flower pot, which is particularly practical.

The bucket of laundry detergent can be used as a flower pot, and you need to use your imagination to make a flower pot, but to use a laundry detergent bucket to make a flower pot, first think about what flowers to plant, and choose a laundry detergent bucket of different sizes according to the size of the flower, so that the root system has enough room to grow. Here are a few easy ways to do it:

Clause. First, first remove the label, each laundry detergent bucket has a sticky and strong label, first pick a small corner to open the hair dryer, blow on the corner of the pick, so that the glue will be dry, and the sticker can be easily removed by itself.

Clause. Second, first conceive a shape, use a pen to draw the position to be cut, you can use a bottle cap to draw a circle, so that the cut will be very round. Be sure to use a large pair of scissors when cutting, so that the cut is smoother than the edges. Many laundry detergent buckets are very hard, so be prepared.

Clause. Fourth, you can tie a few holes in the bottom with red-hot wire for ventilation.

We can also make a convenient flower pot, such a flower pot, that is, some plants need to be moved frequently, it is more convenient, and it is not easy to knock over the pot when moving. Use an empty laundry detergent basin, the kind of bottle with a handle, and then decide the height according to what flowers you want to plant, don't cut the handle when cutting, leave the handle, just to facilitate movement, punch a few holes at the bottom, and the pot will be ready.

Each bottle has a specific shape, and this is the time to show your skills and brainstorm, and you can design the shape at will. Anyway, the laundry detergent bucket is worthless, so it doesn't matter if you cut it and throw it away. Making a few beautiful laundry detergent buckets and flower pots at home is not only beautiful, but also particularly rewarding.

First of all, cut the laundry detergent bucket out of the shape of the flower pot, you can also use some discarded hand towels and some cement to fix, after the shape is fixed, and then brush it with your favorite color, remember to drill a few small holes at the bottom, so that the flower pot is ready.

We can cut the laundry detergent bucket into the shape we need, dig a hole in the bottom, and put some soil in it, so that it can be used as a flower pot.

First of all, drill a few small holes in the bottom of the laundry detergent bucket with a drill, and if the bucket of laundry detergent is very high, cut the bucket of laundry detergent about one-third with scissors.

Use laundry detergent bottles to make flower pots, the specific operation steps are as follows:

1. First of all, take out the detergent bottle you don't want to use, use the hair dryer at home to align the label of the detergent bottle, and turn on the hot air mode, as shown in the figure below.

2. Next, after the label is blown hot, the label of the washing liquid is easy to tear off, and the flower pot made by removing the label will be more beautiful, as shown in the figure below.

3. Then, after removing the label, take out the watercolor pen and draw a circle around the detergent bottle. The purpose of drawing the line is to use it as a reference line when cutting the bottle, as shown in the image below.

4. Next, after drawing the line, take out the scissors and cut off the upper part of the detergent bottle around the bottle, as shown in the figure below.

5. Then, after cutting off, you can also trim the handle part of the bottle, which can cut the flower-like effect, so the flower pot is more beautiful, as shown in the picture below.

6. Then, after making it, put the soil into the bottle, and then plant the flowers and plants into it, and the washing liquid bottle will become a flower pot, as shown in the figure below.

7. Then, when watering, you can also water in the part of the handle to reach the roots of the plant at a faster speed, and you can also hold the flower pot when moving the flower pot, which is very convenient, as shown in the figure below.

8. Finally, you can decorate the flower pot by drawing your favorite pattern on the flower pot with a watercolor pen according to your preference, as shown in the picture below.

The laundry detergent bucket is a simple way to transform a flower pot, which is particularly practical.

You can use paintbrushes, scissors and other tools to make laundry detergent bottles into simple flower pots, and the specific production methods are as follows:

1. Find an empty laundry detergent bottle.

2. Use a pen to draw a small pattern that you like.

3. Then use scissors to cut out the parts without patterns.

4. Leave the pattern you draw, and you can cut out your favorite simple flower pot.

Notes:Because the material of the laundry detergent bottle is relatively sharp, pay attention not to hurt your hands when cutting, and you can wear protective gloves to cut again.

1. Prepare the tools you need first, such as knives and the like.

1. Clean the empty laundry detergent bottle and mark it. Clean the empty laundry detergent bottle, and it is best to remove the label on it, so that it is more convenient to operate it later. In addition, we can draw a line with a marker, so that we can use a knife to cut along the line.

2. Use a knife to cut along the scribing line. When designing the lines, you have to think about what you want to look like. If it is a little more complicated, the cutting will be more laborious, and this requires patience.

3. Decoration is basically the last step, we can use a marker pen to draw some patterns on it to decorate, so that the whole "flower pot" looks more beautiful.

4. Such a beautiful flower pot is ready, and you can plant flowers.

Notes:

1. When cutting with scissors and utility knives along the lines drawn, be careful not to cut your own hands.

2. It is necessary to use an electric soldering iron to scald a few holes at the bottom of the pot, so that the flowers can be permeable and breathable, which is conducive to the growth of flowers.

3. Pay attention to the need to put loose and breathable soil in the flower pot, which can be used to raise flowers.

Tools: laundry detergent bottles, bai scissors.

The specific operation method is as follows: zhi

1. Take out the laundry detergent bottle, tear off the DAO label, and clean it. 2. In accordance with self.

Cut out the general outline of your own ideas.

3. Cut out some wavy decorations on the cutout.

4. Hollow out the top, take out sandpaper and file to polish the cut edge to prevent cutting hands.

5. Sprinkle soil on the lower part of the bottle and plant plants.

Production process:

Ready, scissors, laundry detergent bottle, soldering iron.

Clean the inside of the large bottle of used laundry detergent and remove the label.

Draw down the position of the flower to be planted with a pen, so that it will be easier to operate when actually cutting. Shapes can be drawn as needed.

Use a knife to slowly cut along the line, be sure to pay attention to the strength, be careful when operating, if it is too strong, it is easy to scratch your hands!

Slightly repair the uneven area with a knife, so that you can avoid scratching in the future, and it can also be more beautiful and delicate.

Put the prepared soil in a bottle. You can remove the stones or roots from the soil in advance, so that it is better to plant things. Put the large pieces of soil under first, and add a little bit.

Make a small pit and plant the prepared flower seedlings.

Let's take a look at the material bai first: Yinon lavender laundry detergent bottle du itself zhi is basic, scissors, and possibly also dao

You need a stencil pen as a base for the drawing, buttons and glue for decoration (in fact, I think it might be better to use other decorations, such as a paint brush).

How to make bai pots from plastic bottles:

1. Quasi-preparation material (1) 2 liters of large zhi

a number of cola bottles;

2) Wood. DAO strips, bamboo poles, PVC pipes, or anything that allows him to be framed;

3) Wood screws.

2. Tools. 1) Knife for cutting bottles;

2) Drilling machine or hand drilling, punching holes at the bottle mouth for fixing;

3) Screwdriver;

4) Saw, trimming wooden strips 3, cut the plastic bottle only cut off the upper part of the bottle.

3. Make a hole at the mouth of the bottle;

4. Make a bracket to make a two-layer frame, and it should be noted that the large mouth of the bottle can catch the mouth of the upper bottle;

5. Fix the bottle with screws to fix the bottle to the frame;

6. Loading soil planting Watering put a stone at the mouth of each bottle, and then load the soil. Plant the seeds of the plant and keep irrigated.

Inside bai will sprinkle some toxic substances, oh, it is recommended zhi

It is still necessary to pay attention to the use, because generally DAO is PE, PET, PPC and the like are plastic back materials, and their manufacturing processes have to go through high-temperature perfusion or blow molding, and many of them are made of recycled materials, which inevitably do not contain some toxic substances such as formaldehyde, I think so.

Make small flower pots from scratch, reuse waste, and be beautiful.

Prepare the materials: laundry detergent bottle, art carving knife.

The specific steps to make a flower pot from a laundry detergent bucket are:

1.First, the general shape of the pot is carved with a carving knife, and the corresponding symmetrical figure is first drawn on the bottle with a pen. Then you need to cut off the top half of the laundry detergent bottle.

2.To cut a spout at the bottom of the laundry detergent bottle.

3.Finally, cut it according to your favorite style and decorate it with trinkets such as stickers, and the flower pot made from a laundry detergent bottle is complete.

Making flower pots with laundry detergent buckets is one of the means of waste utilization, which can turn waste into treasure, increase your hands-on ability, and reduce an expense, which can be made with your family, or it can belong to the manual process between families, and it is also very pleasing to the eye to plant your favorite flowers.

Make a swan flower pot out of a waste laundry detergent bottle:

1. Find an empty bottle of laundry detergent, if there is a white one, it is best.

2. Use a hair dryer to blow the stickers on the bottle softly, and it can be easily removed.

3. Draw the general outline of the swan on the bottle with a pen.

4. Use a utility knife or wallpaper knife to carve out the shape of the swan according to the outline, which can be assisted by scissors.

5. Make the outline as smooth as possible to prevent scratching your hands 6. Glue the head with a glue gun, if there is no glue gun, you can use a lighter to burn it. Use stickers to stick out the eyes (you can also use double-sided tape to glue the small buttons on as eyes).

8. Install the soil, plant the spider plant, and it's OK.

Directions:

1. Use scissors to cut the plastic bottle, and pay attention when cutting. Try to start with a third of the way through. The tapered side is not to be left, leaving the bottom part.

2. Then start sorting out these thin strips. Pay attention to cut vertically, cut into thin strips of equal width, and stop when you cut to the position of the pattern.

3. When these thin strips are pressed outward, pressed into the shape of petals and begin to weave flowers, press down the thin strips, and buckle the bottle body downwards to cut out the ears.

4. Arrange the cut thin strips neatly and fold them inward (you can make a swan shape according to your preference).

5. After weaving, a flower pot is ready (you can paint the color on the bottle body, or graffiti).

You can discuss that with the mold maker, they will have a way.

Cut off the upper part, leaving the bottom of the handle to pierce the two eyes. This is the easiest way to do it.