How to choose waterproof coatings for toilets, which is good for bathroom waterproof coatings, and h

There is more moisture in the bathroom, so it is necessary to pay attention to the waterproof treatment during the decoration process, and the waterproof must be in place to avoid the problem of water leakage, and the later maintenance is more troublesome. Secondly, the choice of waterproof coating for the bathroom is also very important, what materials are used for waterproofing in the bathroom? It can be mainly divided into the following types:

1.Cement mortar waterproofing material.

Cement mortar waterproof material is a common toilet coating, which should be matched with cement mortar in a certain proportion to form a uniform liquid. When batching, use a stirrer to stir, and slowly add powder for mixing and stirring while stirring (you can add an appropriate amount of water to adjust the viscosity, but it is best to add water before adding powder), and fully stir and disperse to achieve uniform no powder ball, no precipitation, and the prepared material should be used up within 2-3 hours.

2.Polymer polymer waterproof material.

Polymer polymer waterproof material is composed of a variety of water-based polymers, and then mixed with various additives of high-quality cement, the flexibility of the polymer and the rigidity of the cement are integrated, making it excellent in impermeability and stability. Its advantages are convenient construction, low cost, cost-saving and non-toxic and environmentally friendly.

3.Acrylic toilet waterproofing material.

The biggest advantage of acrylic waterproof coating is that when the paint is applied, the coating will form a conjunctiva, which has strong elasticity and ductility, which is very suitable for waterproofing in the bathroom. And it can be constructed on the wet base layer, with high bond strength, firm combination with the base layer and the outer protective decorative layer, green and environmental protection, no pollution and no peculiar smell.

The above three kinds of bathroom waterproof coatings are used more, and the effect is also very good, and it is one of the preferred materials for family bathroom decoration. When carrying out waterproof construction, it is necessary to follow the specific steps, first of all, to level the floor, first use cement mortar to level the ground (especially the house that is re-decorated), and then do waterproof treatment. Secondly, it is necessary to do a good job in the waterproofing treatment of key parts, and the joints between the wall and the ground, as well as the joints between the water pipes and the ground, are the most prone to water leakage, so the waterproofing of these places must be done meticulously and not sloppily.

1. Use cement mortar on the ground to find a slope in the direction of floor drain, but the surface should be smooth. The slope near the entrance is small, and the slope near the floor drain is large.

2. The pipeline passes through the root of the floor slab and near the floor drain to strengthen the waterproofing. The pipe root building sealing paste is tightly sealed, and the cement is smoothed after the foot guard, and when the waterproof coating is brushed, the glass wire cloth is reinforced with 1 or 2 layers.

3. The wall is clean and flat, without floating ash and small particles, and the small original corner or slope angle is wiped at the junction of the wall and ground. When brushing waterproof coating, paste 1 2 layers of glass wire cloth reinforcement.

4. The total thickness of the polyurethane waterproof coating film is required to be more than millimeters. It can't be decided by the number of passes. The pipe root and the corner of the reinforcing layer are brushed first, and after the surface is dried at room temperature for 4h, then a large area is brushed and scraped. There shall be no leakage and bubbling. Brush a large area for 24 hours and then apply the next layer after curing.

6. The waterproof layer on the ground should be painted 300mm wide outside the door of the bathroom. The waterproof layer of the waterproof ground should be 200mm higher than the ground.

7. Do a 36-hour closed water test as required.

Compared with other functional areas in the home, the bathroom is the most damp place, so the waterproofing project must be done well. So, which waterproof material is better?

1. Polyurethane waterproof coating: Polyurethane waterproof coating is the most common type of waterproof coating on the market, which is a one-component polyurethane waterproof coating made of isocyanate-based prepolymer made by addition polymerization reaction of isocyanate and polyether, and mixed with various additives. There are several common types of paints.

2. One-component polyurethane waterproof coating: The waterproof coating is a reactive flexible waterproof coating, which has good physical properties, strong adhesion, and curing at room temperature and humidity.

3. Non-tar polyurethane waterproof coating: The waterproof coating is a two-component material, using water as the chain extender, which avoids the toxicity of the amine chain extender, and forms a rubber waterproof layer with elasticity and no joints after curing.

4. Acrylic waterproof coating: The waterproof coating is made of pure acrylate copolymer or pure propionate emulsion, adding an appropriate amount of high-quality fillers and additives, and is a synthetic resin one-component waterproof coating.

5. JS composite waterproof material: This waterproof coating is a waterproof coating composed of organic liquid material and inorganic powder, which is a waterproof material with the advantages of high elasticity of organic materials and good durability of inorganic materials. It is a new type of waterproof material developed after absorbing foreign advanced technology.

6. Cement-based permeable crystalline waterproof material: The waterproof coating is a waterproof material composed of Portland cement, quartz sand, special active chemicals, etc. Thanks to the strong permeability of water, chemical reactions and water and leak resistance are realized.

7. Polymer cement-based waterproof coating: polymer cement-based waterproof coating is a general term for some waterproof coatings, and the main materials are some polymer emulsions, but these polymers cannot be made into the waterproof coatings we need, so some matching materials are added to them. So it's a two-component composite waterproofing coating.

In addition to having super waterproof performance, the paint film also has good flexibility and weather resistance, and the most important thing is that this paint is not flammable and does not have any corrosiveness, which will not cause any harm to the construction personnel.

Waterproof coating is one of the necessary materials in our home decoration kitchen and bathroom, and its quality directly affects not only the effect of home use, but also our health. Therefore, the choice of imitation water coating can not be ignored, so which is the best waterproof coating for the bathroom? How to choose waterproof coatings?

1. Which is the best waterproof coating for the bathroom - polyurethane waterproof coating.

Polyurethane waterproof coatings are in liquid form, which are divided into two types: tar type and non-tar type. Non-tar waterproofing materials are curing agents composed of asphalt, additives and fillers. It has the characteristics of stable material, low pollution and aging resistance.

Because the non-tar waterproof materials on the market are divided into two groups, A and B, it is recommended to buy the two groups together when purchasing, and the mixed use effect is better.

2. Which is the best waterproof coating for the bathroom - cement mortar waterproof coating.

Cement mortar waterproof coating is a material that has emerged in recent years, which is prepared by mixing special adhesives and then mixing fine cement and sand ash dust. If you make it smeared, a drain basket can be turned into a basin, which shows how good its waterproof effect is.

3. Which is the best waterproof coating for the bathroom - acrylic waterproof coating.

Acrylic waterproof coating is the first to be applied to environmentally friendly paints and coatings. The biggest feature is that it can be diluted with water, and it is colorless and odorless. And it can also add colorants according to the needs of users to modulate a variety of colors. Therefore, it has been favored by the majority of users.

4. Which is the best waterproof coating for the bathroom - polymer polymer waterproof coating.

Polymer polymer waterproof coating is made of multi-chain polymer materials derived from rubber. It has good ductility and elasticity. And colorless and odorless, very green and environmentally friendly.

However, this paint has a lot of viscosity before it dries, and any small contact will cause the waterproof membrane to be damaged, so special attention should be paid when applying.

How to choose waterproof coatings:

1. Buy brand waterproof coatings.

There are a variety of waterproof coating materials on the market, and the quality is uneven, so it is recommended that you try to choose well-known brands of waterproof coatings when purchasing. Finally, when buying materials, do not be greedy for cheap, and should buy from formal channels (such as large building materials supermarkets and merchant stores).

2. Product packaging.

When purchasing waterproof materials, you can judge whether the product is regular by the packaging of the product. The font of the regular product packaging is clear, and the product manufacturer, production date, product manual, and product description will be marked. At the same time, there will also be an anti-counterfeiting mark of the product.

3. Waterproof coating suitable for home decoration.

There are many types of waterproof materials on the market, including waterproof membranes, waterproof coatings, sealing materials, etc., and the real materials used for home improvement waterproofing are polyurethane and polymer cement-based waterproof coatings. Therefore, you must pay attention when purchasing.

We all know that bathroom waterproofing is particularly important, so we should choose the best waterproof material when doing waterproofing, if we choose inferior materials, there will be many problems when using them in the future. For example, water seepage, mold, and follow-up maintenance are also particularly troublesome. SoBathroom waterproofing professionalWhich paint is better?

Let's take a look at the relevant content about the bathroom waterproof professional coating and the purchase skills of waterproof coating.

First, which is the best waterproof professional coating for the bathroom?

1. Which is the best professional waterproof coating for toilets: one is an organic liquid material composed of polymer emulsion such as polyacrylate emulsion, ethylene-vinyl acetate copolymer emulsion and various additives, and an inorganic powder composed of cement, quartz sand, light and heavy calcium carbonate and various additives through reasonable ratio and composite of inorganic powder.

2. Which is the best waterproof professional coating for the bathroom: waterproof coating is divided into two types: tar type and non-tar type. Non-tar paint is a kind of toilet waterproofing material that is often used in the market now.

It is a curing agent with non-tar substances, such as asphalt, additives and fillers. This kind of toilet waterproof coating is divided into two groups, group A is the curing agent, and group B is the main component of the material. This material has stable quality, low pollution, good aging resistance, good adhesion and water enhancement.

3. Which is the best waterproof professional coating for the bathroom: K11 waterproof coating, K11 waterproof slurry is a two-component flexible waterproof material, which is made of special modified polymer and a variety of additives and dry powder mixed evenly to obtain a flexible waterproof membrane, which has good adhesion to the concrete and mortar base surface, and can form a tight and firm waterproof coating with good durability.

4. Which is the best professional waterproof coating for the bathroom: cement mortar toilet waterproof coating, the general material used is a special adhesive (a bit like special glue) mixed with fine cement and sand dust.

5. Which is the best professional waterproof coating for the bathroom: acrylic waterproof coating for the bathroom, it is the first and largest application in environmental protection paint and coatings. The biggest feature of acrylic acid is that it can be diluted with water to make a water-soluble material, and it is colorless and odorless (lacquer can be mixed with colorants as needed), but it is an unusually dense waterproof material after the conjunctiva.

Second, what are the purchase skills of waterproof coatings?

1. The amount of waterproof coating, before we buy materials, we need to measure the waterproof construction area, and then calculate the required waterproof amount, the reason for this is to avoid the waste of the purchase of construction period or insufficient materials.

2. Distinguish the authenticity of waterproof coatings, there are many waterproof coatings on the home improvement market, and the brand is uneven, how to identify the authenticity of waterproof coatings? Generally speaking, there will be anti-counterfeiting logos, product names, net weights, places of origin, etc. on the packaging of brand products, and at the same time pay attention to whether the handwriting on it is clear and the colors are bright.

3. Environmental protection of waterproof coatings, environmental protection of home decoration is also very important, and waterproof construction is a hidden project, if you buy inferior waterproof coatings, environmental protection performance will have great potential safety hazards, and it is likely to cause a certain threat to the health of your family.

Bathroom is a very important process in the decoration process, because the water consumption of the bathroom is more, so in terms of waterproofing, we must do a good job. To choose the right waterproof coating, and if you want to do a good job of waterproofing the bathroom, then the wall and ground of the bathroom must be accurately constructed, and attention to detail must be paid. For the treatment of the bathroom floor and wall, it must be in place, and all the holes and slots must be treated qualified.

On the floor and wall of the bathroom, cement should be used and all sealed, so that there can be no cracks. There are also a lot of waterproof coatings on the market. For example, polymer cement mortar, polymer, polyurethane waterproof coatings, are very good.

When doing waterproof treatment in the bathroom, it is necessary to add more details to the parts that are prone to water leakage and water seepage. Because the most prone to water leakage in the bathroom is the root of the wall and the part of the pipe, so these parts are easy to crack after the waterproof coating is laid. After the waterproof coating is applied, it is also necessary to use cement and seal it again.

And for the parts with pipes, be sure to focus on applying them, and apply them at least three times. After application, it should be clearly visible that the application is present. After wiping, be sure to check that the surface after application does not appear pores, particles, cracks, or holes.

After this is done, be sure to do a closed water test. However, after applying, you can't do a closed water test immediately, you must wait for 2 or 3 days before you can do it. <>

When doing the closed water test, we must observe whether there is water leakage and water seepage, if there is no water leakage, it means that the laying is qualified. Polymer cement mortar waterproof coatings are also very good, generally applied to the root of the wall, the root of the pipe, these positions. The environmental performance is also very good, so it is very good for waterproofing in the bathroom.

Polymer waterproof coatings are now widely used, and polymer waterproof coatings are large, mostly in a liquid state, but have a certain degree of pollution.