msconfig What should I do if the memory 2050 reserved for the hardware cannot be released?

It should be divided into more points for hardware,If you have to get it,You can adjust the virtual memory,12G may be plus your graphics card or something。

Workaround:

1. Click the [Start] icon in the lower left corner of the computer interface, and in the pop-up menu bar, enter [msconfig], and the relevant programs will come out, as shown in the figure below;

2. Click the [msconfig] program, and the [System Configuration] window will pop up on the computer interface;

3. Then switch the tab to [Boot] and click the [Advanced Options] button below;

4. The [Boot Advanced Options] window will pop up, and select [Maximum Memory];

5. Finally, restart the computer.

If you're a computer, it's recommended not to move, a system disk is more than 1g, it's not big at all, if it's a kernel, connect to the computer directly erase

This will happen with 32-bit operating systems, and in order to make full use of the memory, it is recommended to upgrade to 64-bit OS, and there are a lot of resources on the Internet :)

Practical experience.

When can msconfig change memory? Could it be that I'm out?

Of course, it was changed in the BIOS. But you don't need to change it at all.,When the system memory is not enough,,Automatically take out the 1612 part and use it.,You change it and don't change it.,And the change has an impact on playing large-scale 3D games.。

Y460 is a dual graphics card automatic switching, right?,I remember it as if it was.。 You can manually fix the memory usage of the graphics card to 512 in the BIOS. In the settings of the graphics card, if you don't understand English, don't tune it, and again, it's the same if you don't tune it, the current motherboard is not the same as before.

Dear users, hello!

1. Release the memory reserved for the hardware of Win7 The Win7 system will actually "steal memory" and use part of the memory capacity as "memory reserved for hardware", and the 2G system memory may even be "stolen" more than 500MB. Today we're going to take a look at how to regain that memory capacity. Three steps to get the memory release Enter the system configuration interface First click the win7 "start" menu, enter "msconfig" in the search box, and then the search results above will show the "msconfg" icon, click directly to enter.

Click on "Advanced Options" to release the content that is "occupied" by the system There is a "maximum memory" item, which is grayed out by default, and now we have to click on the small box in front of it to turn it on. After that, click the "OK" button, reboot the system, and check the memory again, you can find that all the memory has been released, and the speed of the system will definitely improve significantly.

2. Refresh the motherboard BIOS(Tried to no avail).

3. Change the 32-bit system to a 64-bit system. If the first one is useless, you should consider changing the system) if your problem is not solved, you can complain and put forward your valuable opinions, and then transfer to manual service.

If your memory capacity is equal to or greater than 4G, you don't feel the need to release the memory reserved for the hardware, because even if you do. The performance improvement is only minimal, and I can't feel it at all, and the scoring software is estimated to be double digits higher, unless it's a slight increase in 2G memory capacity, or you're obsessive-compulsive like me. I've done it with msconfig before, but I modified it in superuser, you can try to enable superuser administrator and use superuser to see if it works.

Your idea is unrealistic. In general, when the memory is insufficient, virtual memory will be found, or some means will be used to release part of the memory. However, on a physical machine, it is rare to keep a large amount of physical memory unused when there is not enough memory.

Even if you can free up, at most about 5% of the memory will be available for you. In addition, if your computer is in a state of full memory for a long time, it is easy to crash or cause application abnormalities.

Can you take a look at your hardware configuration, this is related to your hardware configuration and BIOS settings.

In order to ensure that the hardware can run normally, the memory will be divided into a part of the hardware, which is a normal phenomenon, if you want to free up the hardware memory, you can use the update BIOS version method to solve the problem.

In order to ensure the normal operation of the hardware, the operating system should not change the memory casually, if you feel that the memory is not enough, the best way is to add memory, the current memory is very cheap and cost-effective, 100 or so can buy 4G.

Personally, I don't feel the need to release these reserved memory.

It's enough to have such a large amount of memory.

Reinstalling the system will not affect the files of other partitions.

For example, if you reinstall the system to drive C, the files of drive D, E, F, and disk will not be reinstalled.

Piracy is not inferior to the original system, and many ghost versions of the system will be more convenient.

Whether it is ghost or the original (installed version) system, it can be installed in the following way, which is more stable and suitable for novices.

1. The next system ISO file on the Internet (there are blind dismantling installation version and ghost version).

Extract the system ISO file with RAR to a non-system disk, non-Chinese name (just in case) folder (e.g. D drive"11111"folder).

2. Under the PE system or the local system, use the corresponding system installer to install the manuscript destruction system to the C disk (there are many kinds of system installers, search for ** tutorial online).

Original (Installer) System Installer: WinntSetup, Win$man

ghost system installer:

I have a ** teaching key god preparation in my blog, refer to the following.

Click on my name to find my blog.

xp win7 32 64-bit simple and easy to use hard disk system, one-click restore onekey ghost

The problem of random blocking, no link.

If the original system is pre-installed (some notes are available when you buy them), there may be a 100M or so boot area, if you use the ghost version of the system to restore, use a tool such as diskgenius"Rebuild the Master Boot Record", otherwise the boot screen will be black, and the cursor in the upper left corner will flash.

Turn on and press F8 to enter the safe mode and change it back.

There's no ** or something.

This is normal, why release that part? That part of the memory is not empty, but contains some necessary things for the system.

It's possible that the hardware is suddenly needed (e.g. the graphics card shares the system memory). Something is wrong with wood. If you're going to use a lot of memory and the hardware doesn't need a memory share, the memory reserved for the hardware will automatically shrink in, leaving you with empty slots.

I'm going to use 2GB of RAM, so there's less to keep for the hardware.

Memory reserved for hardware.

Are you a Jixian?

You don't understand what it means to reserve for hardware? The so-called reservation for hardware means that the 2597M memory can be called at any time, in other words, the 2597M memory can be called at any time, and you can treat it as a freed.