What is hibernating in Windows XP?

Hibernation: When you use hibernate mode, you can turn off your computer and be confident that when you come back, all your work, including programs and documents that you haven't had time to save or close, will be completely and accurately restored to the state you left off. The contents of the memory are saved on disk, and the monitor and hard disk are turned off, which also saves power and reduces the wear and tear of the computer.

In general, it takes longer to get a computer out of sleep than it does for it to wait, but it consumes less power.

If you are constantly interrupted at work, such as some secretarial professions that often have to answer questions while doing computer processing**, etc., you can consider setting your computer to go into automatic sleep mode after a specified number of minutes. Sleep mode saves everything in memory to the hard drive, turns off the monitor and hard drive, and then shuts down the computer.

Hibernation: The system saves the current state in the hard disk, and then exits the system, at which time the power is turned off, and the CPU, memory, and hard disk all stop running; Once you press the power switch (the laptop can also be opened flip cover) can activate the system, the computer quickly dials in from the hard disk into the state before sleep to enter the system, which is a faster way to reboot, the system belongs to the real shutdown, suitable for no more than one day of shutdown, because more than a day of shutdown, may make some time-sensitive software in the pre-sleep state abnormal.

It is to achieve the most power-saving results in the state of booting.

That is, close the network connection and exit all processes, just like when you were logged out and not logged in. Personally, I know that this doesn't have much effect, if you don't want to play and want to sleep, you might as well turn it off, if you just leave it for a while, you can turn it on, and there is no need to sleep.

You can try it out for yourself and then think about whether it's really necessary to hibernate your computer.

When the computer goes to sleep, everything in the computer's memory is saved to the hard disk. When your computer is turned back on, all programs and documents that were open when you shut it off are restored to your desktop.

Setting the computer to automatically go to sleep not only saves power, but also protects the monitor. However, there are some drawbacks to the dormant state, such as lifting the dormancy will definitely consume some time, and if we are busy with work, it will cause us inconvenience. Next, let's take WinXP system as an example to introduce the specific method of canceling the hibernation state.

Recommended:

Here's how:1. Find the control panel in the start menu;

2. Open the control panel and find the power option;

3. Double-click the power option to open the power option properties dialog box and click the sleep tab;

4. Cancel the checkmark before enabling hibernation, and then press OK;

Through the above steps, we can take the hibernation state of the closed WinXP system! If you are interested, please follow the method and take a look!

1. Open the control panel and find the Hardware & Sound options.

2. Tap Hardware & Sound and turn on the power options.

3. Select the power plan.

4. Click Balance in the preferred plan and click to change the plan settings.

5. The default is selection"Set your computer to sleep", the settings that appear are as follows.

6. Set both turning off the monitor and putting the computer to sleep to "Never", and then press "Save Modifications".

1. Open the control panel.

2. Click performance and protection.

3. Click Power Options.

4. Click Hibernation.

5. Remove the tick before enabling hibernation - click OK.

There are two shortcuts to turn off system hibernation:

Turn off system hibernationMethod 1

Desktop right click - Properties - Screen saver - Power - Hibernate - Remove Enable Hibernation and turn off System Hibernation Method 2

Open my computer --> Control Panel --> Power Options --> Hibernate (unchecked).

Right-click on the blank space of the desktop point -- > properties -- > screen saver -- > power.

System standby selection. Never.

Click - Start - Control Panel - Power Options - Hibernate - Cancel "Enable Hibernation".

That's it!

Step 1: Click "Start" and "Control Panel" in order to enter the control panel options.

Step 2: Find "Power Options" in the Control Panel Options.

Step 3: Tap "Choose a time to turn off the monitor" in the power options.

Step 4: Set the time when the monitor is turned off and the time when the computer sleeps to know the height to "never".

Under win7:

Select "Control Panel" in the Start menu;

Select and feast on the "Call Silver Source Option";

Click "Change Computer Sleep Time" on the left side;

Click the "Put your computer to sleep" drop-down menu, select "Never", and confirm the settings.

1. Open the control panel, noisy to find the hardware and sound options.

2. Tap Hardware & Sound and turn on the power options.

3. Select the power plan.

4. In the preferred plan, balance and change the plan settings.

5. The default is selection"Set your computer to sleep", the settings that appear are as follows.

6. Set Turning off the monitor and putting the computer to sleep to "Never", and then press "Save Modifications".

If the computer cannot wake up after hibernation, it is because the wake-up conditions are not met, and the main reasons are as follows:

1.Interrupts used by the keyboard or mouse are not set to be used to wake up, the solution is to go into the BIOS's "Power."

management

setup" and set the "pm."

Events" option to set IRQ3, IRQ4, IRQ5, IRQ6, IRQ12, IRQ14 and IRQ15 to "Enabled".

2.If there is a conflict between the device drivers, it is recommended to uninstall the old drivers; The driver is not compatible with the installed hardware, please replace or upgrade the driver.

4.There is a problem with the operating system, and perhaps installing a patch will fix the problem.

5.If you can't wake up after a little longer after hibernation, it is likely that the CPU fan is stopped and the CPU has not entered the corresponding sleep mode as required, causing the CPU temperature to be too high, resulting in the computer not working properly. This phenomenon mostly occurs in computer systems that monitor CPU temperature and CPU fans.