What should I do if the client cannot find the hard disk when the diskless system is turned on

From the time the server setup is all done:

Add disks to the server. Add a workstation template, the IP and machine name and MAC address should be the same as your pager. Then on the server side, select the disk you just added as the superuser.

The client boots with this hard drive. BIOS to set the NIC to boot.

After entering the system, change the machine name IP, (consistent with the template added in the server) and then install the Ruiqi client. Then find the Sharpkey client in the program and open it. Enter the server IP

Next. Then reboot 2 times. After restarting 2 times, enter the system and right-click on my computer management.

Disk management. After clicking on it, it will pop up which virtual disk you just added in the server. Next step, next step, next step. Then right-click on the disk to format it.

After completion, open the Sharpstart client to upload.

Original Disk C: The target disk is the one you just formatted. I don't choose anything else. Click Upload. Shut down after the upload is complete. Unplug the hard drive. The NIC is turned on. OK.

Divide it. If you don't have an IMG file that matches your workstation (the one that doesn't have a hard disk), then you have to boot the system with a disk, install the driver, and upload it to the server. Once the img file is generated.

The server points the IMG file to the system that your client boots on. to get in. Otherwise it can't be.

If there is really no way. Then you just look at what your client model is, and go to the online **one. But the network card settings of the original workstation of the img file should be the same, right?

The boot client of the diskless system should be started from the network card.

When using the computer in daily life, you will encounter the situation that you can't find the hard disk when you boot it, and this kind of problem occurs, most of your friends are dealing with it by the computer maintenance department, and will not delve into whether the computer has any faults, in fact, the phenomenon of not finding the hard disk when you boot is still easier to deal with, and you can solve it yourself. Next, let's take a look at how to deal with the hard disk that cannot be found at boot and what causes the computer to not find the hard disk, let's take a look!

1. What to do if you can't find the hard disk when you boot it:

1. After entering the BIOS, select the "IDE HDD Auto Detection" item to see if it can detect the hard disk, and compare it with the model of the computer hard disk. If you can't find the hard drive, it may be because the hard drive is damaged or the wiring is incorrect.

2. If the hard disk can be viewed in the BIOS, generally the main boot sector of the hard disk is damaged, you can use the PE system with DOS toolbox to run the DOS command "fdisk mbr" to try to repair the main boot sector of the hard disk.

The above two steps can often solve the problem of not finding the hard disk at boot, you can try to restore the BIOS to the default settings.

3. The phenomenon that the computer can not find the hard disk when it is turned on may also be because the computer system has some kind of failure, resulting in the system not being able to recognize the hard disk, so in this case, using the system installation disk to repair the system or reinstall the new system can also solve this problem.

4. If it is a failure problem in the hardware of the computer hard disk, then it is recommended that you plug in the relevant wiring of the hard disk, if the problem cannot be solved, it is recommended to send it to the local service station for maintenance.

1. First of all, check the data cable and power cord of the hard disk, whether there is any looseness, whether there is oxidation, whether there is needle breakage, these three situations are one of the reasons that may cause the hard disk to be undetectable by the computer.

2. If the above faults do not exist, you can try to check whether the motherboard has turned off the SATA interface. If the SATA interface is turned off, the hard disk will not be detected, just open the interface in the BIOS.

3. System overclocking. Many people will overclock the system because of the need to operate, and this behavior is also easy to cause the computer to not detect the hard disk, and only need to modify the device back to solve the problem.

4. The computer has not been used for a long time, and the hard disk components are damp, which is also.

The message is displayed: The disk boot failed, press Enter after inserting the system disk.

In other words, you can't find the system disk after your computer is turned on. This phenomenon can be solved from the following aspects:

1.In addition to the problem of the boot system of the hard disk, try to put it in the boot disk or have a floppy disk in the floppy drive.

2.You can check whether the First Boot Device is HDD-0 in the Advanced BIOS Features menu of the BIOS

Troubleshooting: After entering the CMOS settings, select the "IDE HDD Auto Detection" item to see if the presence of the hard disk can be detected.

If no hard drive is detected. The first thing to consider is the hard disk, you can judge whether there is a problem with the hard disk by listening to the sound of the hard disk or connecting the hard disk to other computers. If there is a problem with the hard disk, the data on the hard disk can be recovered by a special data recovery company; If the hard disk can be detected correctly, please check whether the capacity and other parameters of the detected hard disk are the same as the actual hard disk parameters.

It is the same, indicating that the system should be normal, and it may just be that the setting information of the hard disk parameters in the CMOS is missing. Different, it means that the system must be faulty, it may be a fault of the motherboard, too.

It is possible that the hard drive cable is faulty.

3.Reasons: 1) The hard disk and optical drive are connected to the same data cable, and the jumpers are all set as the master disk (or both are set as slave disks).

2) The CMOS hard disk parameter is set to none

3) Main boot sector end flag 55aah error.

Processing: (1) Set the CD-ROM jumper to a slave disk (or the hard disk jumper to the master disk).

2) Reset CMOS

3) Repair with NDD's "Diagnostic Disk".

If you have a problem with the data cable interface or power cord interface, press a button, and then plug and unplug it, and you can't find someone to repair it.

How do I start the hard drive, the computer boots up and can't detect the hard drive, what should I do?

The computer can't enter the system when it is turned on, and it doesn't move in the interface with white characters on a black background as shown in the figure, which is nothing more than two situations, one is that there is a problem with the system, and the boot file cannot be found, in this case, you can reinstall the system. The other is that the hard drive cannot be detected.

How it works: 01 The reason why the hard disk cannot be found is not the reason that it cannot be booted, we can enter the BIOS to confirm. Press the del key when you boot up, as shown in the interface, there is no hard disk in the drive list, which means that the computer has not detected the hard disk.

02 In this case, we can first turn off the computer (completely power off), open the side cover of the case, replug and unplug the power cord plug and data cable plug of the hard disk, or replace the plug and data cable, and then turn on the computer to see if the hard disk can be detected.

03 If the above operation does not work, try to change the power supply (you can also find an old power supply), and eliminate the power supply output voltage is unstable and difficult to start the hard disk.

04 If you can't replace the power supply, or you can't detect it when you connect your hard drive to another motherboard, your hard drive is broken, and you can only replace the hard drive.

How do I start the hard drive, the computer boots up and can't detect the hard drive, what should I do?

1.Loose, oxidized, or broken hard drive data and power cables.

Solution: Try to replug the hard disk cable and power cable, or replace the power connector and data cable interface.

2.The motherboard has turned off the SATA interface, and the computer is using SATA hard drive, which causes the computer to find the hard drive.

Solution: Press the DEL button to enter the BIOS and open the SATA interface in the BIOS.

After reading your description, you can check it from the following two aspects:

1. Check the hard disk.

Power cord and. whether the data cable is tightly connected;

2. After you delete the partition, whether the hard disk is partitioned correctly, if you don't use the partition tool.

Open the hard drive to repartition. Also, go into the BIOS and check if you find the hard drive.

How do I start the hard drive, the computer boots up and can't detect the hard drive, what should I do?

The first symptom: the system does not find or cannot recognize the hard disk after booting.

This situation leads to the system not being able to boot the hard drive, even if we boot the computer by other means, we cannot find the hard drive. The solution to this situation is actually quite simple, because so far, I have not heard of that hard drive has compatibility problems with the motherboard.

There is a high possibility that this kind of problem will occur on the cable between the hard disk and the motherboard, so it is recommended that you replace the cable between the hard disk and the motherboard.

If it is not a problem of connection, then you can take a look at whether the master-slave line on the hard disk is set correctly, and how to set the position of the master-slave jumper will generally have a prompt on the hard disk, and set the hard disk as a master disk or a slave disk according to your own needs to solve this kind of problem.

The second symptom: the hard disk is faulty due to improper BIOS settings.

This type of problem is generally not the responsibility of the user, because today's motherboards use the function of automatically detecting the type and brand of the hard disk, so it is usually not changed, but because some motherboards may have the wrong situation of identifying the type of hard disk when running, this situation will also cause the system to fail to boot from the hard disk.

In addition, you can also set the working modes of the hard disk such as normal, lba and large in the BIOS of the motherboard, which must be set according to the situation of the hard disk, otherwise there is a high chance of other errors. It is not difficult to solve this kind of situation, as long as you follow the BIOS instructions of the motherboard and the situation of the hard drive itself and set it up correctly.

Symptom 3: There is a master bootloader but the hard drive cannot be booted.

The hard disk has a master boot area, in which the master boot program is stored, if there is a problem with the master boot program, then the system cannot boot from the hard disk is a very normal thing. Just enter the fdisk mbr command in DOS mode, mainly because the fdisk command file already contains the main bootloader of the hard disk.

Fourth symptom: It can be recognized in the BIOS, but the system can't.

This problem often occurs when adding a new hard disk to the computer, which can be seen in the BIOS, but not in the disk management and device manager of the system.

In addition to the common jumpers and setting up the master and slave disks, there is another point that is often overlooked, that is, in the device manager, the attributes of "IDE ATA ATAPI Controller" - "Primary IDC Channel" or "Secondary IDC Channel" (you can set the one on which port you plug the hard disk in), "Advanced Settings" - Device 0 - Device type, if it is "None", please change it to "Auto Detection", and then restart.