ZXHN F460 Wireless Cat How to set up wifi

Dear Telecom users, Hello! Welcome to use China Telecom products, use a network cable to connect the Internet port on the optical modem with the WAN port of the wireless router, and then use the network cable to connect the LAN port of the wireless router to the computer network card. Then press the settings below:

1. Appearance of the wireless router.

Let's first understand the various interfaces of wireless routers, basically wireless routers are similar, and the position of the reset button may not be the same.

Connect the wireless router well, I believe this is difficult for everyone, after connecting, start the router.

2. Wireless router parameter settings.

After connecting, open the browser, it is recommended to use IE, enter it in the address bar to enter the settings interface of the wireless router.

You need to log in before you can set other parameters, the default login username and password are admin, you can refer to the manual.

After successful login, select the Setup Wizard screen, which will automatically pop up by default.

After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and you can click Next directly.

According to the setup wizard step by step setting, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following according to the actual situation.

If you don't know how to choose, you can directly select the first item to automatically select, which is convenient for novices to operate, and click next after choosing.

Enter the password you received from your network service provider, and go directly to the next step after entering.

If the above information does not solve your problem, you can log in to the online business hall of China Telecom**.

Or call 10000 and have a great day.

Enter in the browser, and the password is admin. Super password on the back of your cat. There's a password there.

How to change the wifi password of router ZXHN-F460:

1. Enter the router:

Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name, password, (the default is generally admin).

2. Wireless Settings - Wireless Security Settings - Select [WPA-PSK WPA2-PSK].

Authentication Type: Automatic.

Encryption algorithm: AES.

The PSK password is the wireless password. Set the required password.

After logging in, click on the network menu, and then click on the WLAN (or wireless LAN) small menu under it, you can see the wireless password inside, delete the original and then enter the new password, save and restart the optical modem.

Type it on a browser on your computer.

Dear users, hello. We'll be happy to answer your questions. Based on the information you provide. It is recommended that you set it up according to the method I provided below, I hope it can be helpful to you.

1.First, factory reset your wireless router, there is a button or hole in the wireless router that is specially used for factory reset. You can press for more than five seconds and release to restore factory settings.

2.The LAN port of the router is connected to the computer, remember, do not connect the cat. Connect only the LAN port of the router to the computer.

First, set the IP address of the computer and the IP address of your router in the same frequency band, for example, the IP of the router is set to the IP of any of the default gateways set to the IP of the router Enter the correct IP address of the router in the browser, enter the settings interface, remember, don't move anything, follow the setup wizard to set up, just set PPPoe and enter the correct password, and then set the wireless password.

3.Once you're set up, restart your wireless router.

4.Connect the port of the cat to the WAN port of the wireless router, and connect the LAN port of the wireless router to the computer. Restart all devices.

5.Set your computer's IP address and DNS address to be obtained automatically.

6.Normal use.

At present, Anhui Telecom Network Department carries out relevant mobile phone preferential activities. If you need to buy a phone, please log in to the Anhui Telecom network hall** to buy the latest mobile phone. If you need to check the bill and pay the phone bill, please log in to the online business hall of Anhui Telecom, and get 2 yuan for 100 yuan.

Hope mine can get yours. Thank you.

You don't need to buy a MODE, you just need a wireless router, set the IP address of the router to the LAN port of the routing modem, connect the LAN port to the RAN port of the routing modem, turn off the DHCP service of the router, and you're good to go.

You have to use a splitter with a split line, one with the first to connect the first to the moden, and then use a network cable to connect the WAN port of the moden and the router, and WLN to connect to the computer. Then the computer sets the NIC to automatic IP and DNS, and finally enters the routing interface to set the dial-up user name and password. Hope it helps.

Fiber optic modem connection wireless router setting method;

2. Connect the network cable from any LAN port of the optical modem to the WAN port of the wireless router, and then connect the network cable from the LAN of the wireless router to the computer, and the local connection IP address and DNS settings of the computer are automatically obtained;

3. Open the browser, enter, press Enter, enter the wireless router management user and password (the login address, management username and password will be indicated behind the wireless router), OK, and enter the wireless router setting interface;

4. Set up the wizard, next, select PPPoe dial-up Internet mode, next step; Enter the Internet account and password, next, set the wireless network name in the SSID box, set a wireless password of at least 8 digits in the psk box, and the next step;

5. Save and restart the wireless router to complete the installation of the wireless router.

1.First of all, you need to make sure that your router has Wi-Fi capability and whether it is turned on.

a.Connect a laptop to any LAN port of the router with a network cable, set the laptop to automatically obtain an IP, and then select it"Get started"- > run"- > input"cmd"->ipconfig to see the IP address of the laptop and the default gateway;

b.Open Internet Explorer and enter the default gateway address obtained in Step 1 to enter the router configuration page. Before entering, you may need to enter the login router and password, and generally the bottom of the router has the initial and password to log in to the router;

c.Then see if the router has a wireless network function configuration, if so, enable it, then set the appropriate SSID and set the SSID broadcast, it is recommended to set the wireless security password;

2.Unplug the network cable from the laptop, turn on the wireless function of the laptop, and search for the wireless network. If your router's wireless function is successfully enabled, the SSID of your collapsed router will be displayed in the list of wireless networks searched on your laptop, just select the wireless network connection and enter the password.

Just look at the manual for step-by-step settings.

Hello!!! zxhn f460 why no slip book online limb kai net ah i have a password it's my own router that god can help me better it's free thank you.

The main thing is to find a good seller to be true!

If you break the letter, you can get the password!

**Shop Cat Riot where the network card is better!

Generally 1000 to 5000 meters!

None of them have 10 kilometers, and the rough non is ** hoarding.

Telecom Fiber Optics Cat ZTE ZXHN

F460 Connecting to Wireless Router TP-Link Method:

Steps. First, the connection method.

Routing modem --- router WAN port; The LAN port of the leaky router --- the computer.

Steps. Second, the setting method.

Before setting, please disconnect the WAN port network cable of this router and plug it in after the setting is complete.

1. Set the IP range of the router.

In order to avoid conflicts, you can change the IP of the router to other IP segments in order to avoid conflicts (routing the LAN port of the cat). For example, it is modified to:

2. Set up the Internet access method of the route rejuvenation detector.

View the IP details of the computers connected to the routing modem. (win+r--input, cmd--input:ipconfig.)

All remember: IP, Mask, Gateway, DNS])

Set it on the router, and select [Static IP] in the [Setup Wizard]. Enter the same as the IP address of the routing modem, the others: mask, gateway, and DNS settings.

Restart the router after the setup is complete.