-
The machine for the CQ45 requires a chip with Intel ICH9M. So it's better to have an XP system disk with this chip. Driver for CQ45: Chipset.
Sound card Sound card installation Note: Please install the Microsoft Universal Audio Architecture (UAA) bus driver first, and then install the sound card driver Microsoft Universal Audio Architecture (UAA) bus driver sound card: This machine system will recognize the audio devices on the two buses, and in order to ensure the stability of your system, complete steps 1 and 2 respectively, and specify them to avoid blue apples or blurred screens.
Step 1: Install any of the following programs, if you can't install it, you can use the following manual way to install the sound card driverInstallation points: 1. Before installing the sound card driver, you must first install the sound card UAA bus driver, 2. Unzip the attached sound card first; 3. Go to the Device Manager and click Audio Device on High Definition Audio Bus (audio device on the bus) and right-click to update the driver; 4. In the Hardware Update Wizard, select Install from List or Specified Location (Advanced); 5. Next, select Don't Search.
I have to choose the driver I want to install myself; 6. In the next step, select Sound, ** and Game Controller in the hardware type; 7. Next, after selecting Install from Disk, click Browse to point the path to the extraction folder; 8. Find the WDM WinXP driver file, double-click - OK, open "Next" will appear Update Driver Warning Ignore the prompt and continue the installation. Once the installation is complete, the sound card device is working normally. (If there is a noise after the sound card is installed, please try to turn off the energy saving option in the IDT console under the control panel) If the sound card disappears after installation, you need to install the IDT sound card patch.
Or the questioner's follow-up 2010-11-14 12:23 This question is too professional, Report My supplement 2010-11-14 12:53 If you want to have a voice, just do it.
Install SP33867 firstReinstall SP38558. This requires specifying the installation.
Assign to C: SWSiteration SP38558 WDM WinXP If the sound card disappears after installation, you need to install the IDT sound card patch · Graphics card.
**In the third party**, netizens summarize) Shortcut key touch pad network card**In the third party**, netizens summarize) Wireless network card wireless network card reader camera (if the machine does not have a built-in camera, you do not need to install this driver fingerprint reader driver fingerprint recognition software mobile data protection Bluetooth driver ** in the third party**, netizens summarized) Ene Cir receiver driver.
-
CQ home machine pays attention to the entertainment effect, if your standard configuration is Vista then it is best not to easily change to XP because some models of HP do not support downgrading, after downgrading to XP, it may lead to the drive on the card can not be driven, for example, there is no external amplifier Plug in the headphones have external amplifiers and the like, even if you can downgrade to XP, then please do not choose the ghost version of XP Because the performance of the Ghost version of XP itself is very unstable, it is recommended that you do a pure version of XP If you want to do win7, Then please call HP Support first**. 8008103000 consultation. Your model doesn't seem to come with standard...
-
Briefly,Change the system on the desktop,Now it's all ghost disks,It's very simple,Set up from the optical drive,It will run automatically,But there's a problem here,HP's new notebook can start from the disc but can't run the things in the disc,For example, "install the system to the C disk, etc.",How to solve it? Many friends say that they will brush BIOS, but how many people will brush it (flashing is risky)?
After many experiments, I finally found a way. The premise is that the XP disc can be started from the optical drive,In addition, it comes with Windows PE options,In this way,After the disc starts, you can choose to start Win PE (other options can't enter),After entering,There is a one-click function on the desktop divided into four areas,It is recommended to use (only for new machines,The hard disk is two areas),Then click on the desktop to load the XP system into the hard disk (after selecting the C disk,Then put the formatting point on),Wait patiently for a while,It will restart after it's over, Then you'll find that the system is already installed on the hard drive.
Now it's half done.,There's still a driver problem.,This is the most troublesome.,There is no XP driver on HP's official website.,You can find it on the Internet.,The driver on the installation disk can only be installed with the graphics card of the notebook at most.,Chipset and camera,The others can't be installed.,The most difficult thing to install is the sound card driver.,This problem bothered me for a long time when I installed the cq45-325.,Finally, I succeeded at the end of the road.。
Reminder, after changing to XP, the driver is the biggest problem, if you don't have a driver, or can't find it, it is recommended that you don't change it, otherwise there is no sound is very distressing!
-
It's impossible. After installation, the XP will be lost, and the original can not be kept.。。。
-
This machine doesn't have Bluetooth.
You need to brush BIOS to change XP,QuickPlay If you want to keep it,It's more troublesome,When partitioning, you need to reserve 1G space that is not any format,Install QuickPlay first,Then install XP
-
The so-called Bluetooth supports Bluetooth, and there is no module, you must prepare the module yourself, you can install a driver!! At present, as long as there is a driver, and it is correct, everything on your computer can be used, but there is one point, it is recommended not to flash the BIOS
-
Yes, you can find another driver and install it, and the general official website has a forxp driver, and it is not possible to install xp with win7 drivers.
-
No, after installation, there are a lot of drivers that disappear, which will lead to many serious consequences, the drive is very important, and it is also troublesome to reinstall.
Install the sp3 2009 maniac version xp of the computer company to save you the trouble of installing the driver Smart driver installation. >>>More
Don't you know this? HP many computers install XP to brush BIOS first, your cq40 model HP computer to BIOS flash, that is, reduce your BIOS version and then install XP, otherwise there will be your above problems, it is recommended that the landlord send to the maintenance station to brush BIOS, because there is a risk of brushing BIOS, may damage the motherboard, in addition to the XP system you want to install must be integrated ICH9 driver, otherwise it will not be able to identify the system disk, HP computer installation XP system is a very cumbersome thing, It is recommended that the landlord install win7,But don't use ghost win7,You should use the original vol version of win7,This kind of system has to be online,I hope the landlord succeeds!
In terms of configuration, the HP CQ40-406AX (NT742PA) is the highest, and ** is also the lowest. >>>More
1.Power on and press F8 to enter safe mode and see if you have this problem too? If not, it is recommended that you upgrade your antivirus software and check it out. >>>More
It is recommended to set up the steps to boot the optical drive: please press the F10 key when you boot the computer, enter the BIOS and set it to the optical drive boot setting method bios-system configuration-boot options-cd-rom boot [enabled] and then reboot, put in the pure version of the CD, and follow the installation prompts to install it. (It is recommended to burn the recovery disc of the system before installing the system, so as not to restore the system that comes with the machine in the future).