HP CQ32 how to set the optical drive boot

It is recommended to set up the steps to boot the optical drive: please press the F10 key when you boot the computer, enter the BIOS and set it to the optical drive boot setting method bios-system configuration-boot options-cd-rom boot [enabled] and then reboot, put in the pure version of the CD, and follow the installation prompts to install it. (It is recommended to burn the recovery disc of the system before installing the system, so as not to restore the system that comes with the machine in the future).

1. After backing up the data, you can insert the system installation disc into the optical drive, restart the computer, press the "F9" key repeatedly after booting up to enter the startup item settings, and choose to boot from the optical drive (for example*** cd-rom or optical disk driver), and then you can boot the system disc from the optical drive to install the system.

Remind you that after entering the disc boot interface, if press any key to boot from cd or *** appears....Tips, please press a button quickly and casually, and you can continue to install.

2. If you can't boot, please click the F10 key continuously when you boot up to enter the BIOS, then click Boot Options in System Configuration, set the CD-ROM Boot to Enable, and finally press F10 to save and exit, and then test whether you can install the system from the CD-ROM boot disc.

We hope you find the above reply helpful.

Now that you've checked the "Startup Settings" option, you should go in and set where to boot from.

Press F9 to start up, and a startup item will appear, and there will be an optical drive to start it.

Boot up press F9 to select the optical drive.

HP How to set up disc boot:

1. Press the F10 button continuously when the ComPAQ logo appears on boot.

2. Go to BIOS, and then go to System

configuration, click boot

options, will cd-rom

boot setting is checked;

3. Enter boot

order

Move the diskdrive to the first position, and then press F10 to save and exit.

4. Put the system disk into the optical drive, and then turn it on, and it will automatically enter the disc menu.

5. Select 1 to install the system to the C disk.

This setting is the same, when you turn on the computer, you will see a prompt in the lower left corner, saying how much to enter the set up, you can press as much as you want, and then you can enter the main interface of BIOS settings. Then you can find First Boot in the advanced BIOS settings, change it to CD-ROM, and then press F10 to save and exit! Good luck!

Press the ESC prompt to enter the BIOS and change the English to Chinese prompted.

Press F9 or F10 to power on and see the prompts

HP's machines are pressed ESC to enter the function key menu, and then press F10 to enter BIOS SETUP to set the boot item, specifically in the system configration, you can also set the boot order.

HP How to set up disc boot:

1. Press the F10 button continuously when the ComPAQ logo appears on boot.

2. Go to BIOS, then click Boot Options in System Configuration, and check the CD-ROM Boot setting;

3. Enter the boot order to move the optical disk drive to the first position, and then press F10 to save and exit.

4. Put the system disk into the optical drive, and then turn it on, and it will automatically enter the disc menu.

5. Select 1 to install the system to the C disk.

In fact, the default is that the optical drive starts first! You put the disc in and restart the computer to see, or you have to set it up under the boot press del or f2, I'm not in school, and I come to me directly at school, and I want to say that the answer upstairs is completely wrong!

Simple, press F12 when booting up, the option appears, select CDROM on it. No, change the boot option settings from the BIOS.

Simple, press ESC when booting up, the option appears, select CDROM on it. No, change the boot option settings from the BIOS.