How to use Cayenne s handbrake? Where is the Porsche Cayenne handbrake?

1. Handbrake. How to use, steps:

1. Determine the working position of the handbrake handle.

2. When the handle is pulled to three-quarters of the entire stroke, the handbrake system should be in the normal braking position. This working point should be found first, and this working point can be ratcheted by counting.

The sound to determine, generally between 5 and 7 squares is the normal position.

3. Check the efficiency of the handbrake mechanism, that is, to see if the handbrake can work effectively. Drive the car to a slope with a steep slope and a good road surface condition and press the brake pedal.

Hang neutral. Pull the handbrake lever to the position of the working point you just determined. Slowly release the brake pedal, if the car does not slip, it means that the handbrake is working well.

4. Check the sensitivity of the handbrake, which is very important for slopes. Drive slowly on a smooth road surface and slowly pull the handbrake lever to feel the sensitivity and engagement point of the handle. If you find that the braking efficiency or sensitivity of the handbrake is not ideal, you can solve it by adjusting the cable of the handbrake.

2. Precautions:

1. If the slope is congested, remember not to forget to pull the handbrake: if you forget to pull the handbrake when you usually park, and the vehicle slips backwards, it may not be too dangerous to step on the foot brake. But if you encounter a traffic jam in the middle of a slope and the owner forgets to pull the handbrake, it is very dangerous.

2. At high speed, the handbrake cannot replace the foot brake: the main function of the handbrake is to control the speed of the rear wheels of the vehicle. But in fast driving, the braking force of the handbrake is very small.

If the owner pulls the handbrake at high speed, it will be easy to lock the rear wheels, the cable will be broken, and the vehicle will slide sideways or even roll over.

3. Running with a handbrake, large brake loss: Driving with a handbrake has the most direct impact on the accelerated wear of the brake disc and the brake pads.

After heating, it hardens, and the handbrake cable is elongated. This can lead to a decrease in braking performance, and sometimes the smell of burnt smell is also caused by the owner, and in severe cases, there will be smoke from the rear of the car. If you pull the handbrake for a long time to drive, it may also cause the brake cylinder to bite and the brake fluid.

Leaks, brake fluid.

The temperature is too high, resulting in a complete loss of braking function.

The Porsche Cayenne uses an electronic parking brake, and there is no longer a handbrake lever. is an electronic button. The position is also not in the position of the lever of the traditional car handbrake. And under the steering wheel, on the left side (next to the headlight knob).

The handle above the footbrake is used to remove the handbrake.

The position of the Porsche Cayenne handbrake is shown in the figure below

The Porsche Cayenne was first unveiled at the Geneva Motor Show in early 2002 and is divided into five categories: Cayenne, Cayenne S, Cayenne Turbo, Cayenne Turbo S and Cayenne GTS. Coming from Porsche, a company known for producing sports cars, the Cayenne is an SUV, but it inevitably has many sports car qualities. In Spanish, cayenne means "chili pepper". And this SUV produced by Porsche, whether it is external or internal, is indeed like a red pepper, attracting people's attention.

The Porsche Cayenne uses an electronic parking brake, which is a button with a circle pattern with the letter P in the middle, located at the rear of the vehicle's gear lever, and can be pulled up after the vehicle is parked, and the specific operation steps to find are as follows:

1. Open the driver's door of the vehicle.

2. Ensure that the vehicle is stationary on the road.

3. Find the position of the shift lever of the vehicle.

4. There is a button with the word P written on the back of the gear lever.

5. This is the handbrake switch.

Notes:1. Try to park your vehicle on the road.

2. Don't forget to release the hand brake when the vehicle starts.

The electronic parking brake of the Porsche Cayenne is generally located at the bottom left of the dashboard, and the light is controlled in the same position, with a P logo on it. The picture below shows the Porsche Cayenne electronic parking brake button, which can be pressed when parked (different brands and models of electronic parking brake may be pull-up action).

Electronic parking brake is a technology that realizes parking brake by electronic control. Its working principle is the same as that of the mechanical handbrake, which is to control the parking brake through the friction generated by the brake disc and the brake pads, but the control mode has changed from the previous mechanical handbrake lever to an electronic button.

The electronic parking brake is also known as the electronic parking brake system. Electronic parking brake (EPB) refers to the technology that integrates temporary braking during driving and long-term braking after parking, and realizes parking brake by electronic control.

The electronic parking brake extends from the basic parking function to the automatic parking function Auto Hold automatic parking function technology, so that the driver does not need to brake for a long time when the vehicle is stopped. When the automatic electronic parking brake is activated, unnecessary coasting of the vehicle is avoided.

The Porsche Cayenne uses an electronic parking brake, and there is no longer a handbrake lever. is an electronic button. The position is also not in the position of the lever of the traditional car handbrake. And under the steering wheel, on the left side (next to the headlight knob).

The old model is a little above the left foot and stepped on with the foot.

**It is an electronic parking brake under the air outlet on the left side of the air conditioner, and a circle is added outside a p...

It is a wire-controlled handbrake, and unlike the traditional hand-pulled handbrake, it is just a button, which can be found in the center console.

The Porsche Panamera's handbrake, located at the rear of the gear lever, is an electric handbrake.

The switch, when used, pull up to start, can ensure that the vehicle will not slip, the specific operation steps are as follows:

1. Press the brake pedal of the Porsche Panamera to slow down the vehicle.

2. Park the Porsche Panamera on the old and safe road of Xiangkuan.

3. Put the gear lever of the Porsche Panamera in P gear.

The location is the parking gear.

4. Pull up the electronic parking brake switch of the Porsche Panamera.

5. Press the one-button start button of the Porsche Panamera to turn off the vehicle.

Open and close the doors.

1. Check whether the parking brake is out of order, the parking brake is an important part of the automatic parking function, so when the parking brake fails, the fault light will be on.

2. Reopen and close the door, if the door is not locked, the system will judge that the automatic parking function cannot be used in an unsafe environment.

3. To reset the electronic parking function, first turn on the car key leather and press the brake, press and hold the electronic parking brake down for 5 seconds, and then press and hold it up for 5 seconds to complete the reset.

4. Go to a repair shop or 4S shop to check whether the ABS pump is faulty.

5. Press the switch button of automatic parking twice again to see if the button is stuck.

Porsche, is a luxury car brand under the German Volkswagen Group, also known as Porsche, headquartered in Stuttgart, Germany, is the main representative of European and American automobiles, the main models are 911, Boxster, Cayman, Panamera, Cayenne, Macan.

It's not pressing, it's pulling, at the bottom left of the steering wheel, under the keyhole, there is a (P) handle, this is the Panamera's handbrake, nonsense, the picture above allows you to see clearly.

Here's how to use this handbrake:1. According to the information of the Pacific Automobile Network, to activate the electronic handbrake, you must first remove the brake pedal and pull the electronic handbrake switch upwards until the indicator light in the Yijing Xiang table lights up, and the indicator light on the handbrake switch will also light up. When the engine is turned off and the electronic parking brake is not activated, the vehicle automatically activates the electronic parking brake.

2. Electronic handbrake emergency braking: When the vehicle can stop with pedal brake, pull the electronic handbrake switch for more than 2 seconds for emergency braking, and the warning mode will sound at the same time.

3. Release the hand brake switch or press the accelerator pedal to cancel the emergency braking. Bright beats.

4. Turn off the electronic handbrake in the spike shed: press the electronic handbrake switch while pressing the brake, and the indicator light on the instrument and switch will go out. When the engine is running, pressing the throttle automatically releases the electronic parking brake.