What is the best waterproof material for swimming pools

Waterproof decoration as a hidden project, but it is a very important part, especially in recent years, the waterproof material has not been selected, the leakage phenomenon is obvious, and the leakage problem has caused many neighborhood disputes, so now everyone is very concerned in the process of decoration. The choice of waterproof coating has also become the top priority in the selection of decoration building materials. So how many types of swimming pool waterproofing materials are there?

What are the ways to use waterproof materials?

There are three main types of waterproof materials: waterproof membranes, which are mainly used in engineering construction, such as roofs, exterior walls, etc.; 911 polyurethane waterproof material, containing volatile toxic gas, strict construction requirements, and expensive cost; The new polymer cement-based waterproof material is composed of organic polymer liquid material and inorganic powder, which integrates the characteristics of high elasticity of organic materials and good durability of inorganic materials, and forms a high-strength and tough waterproof coating film after coating, which is a common choice material for home defense.

How to use waterproof materials. : Stirring: Pour the liquid into the container first, then slowly add the powder, and stir fully for 3-5 minutes until a uniform slurry without flour balls and particles is formed. (It is best to use a blender).

Brushing: Brush directly on the base surface with a brush or roller brush, and the strength should be used evenly, and the brush should not be missed; Generally, it needs to be brushed twice (according to the requirements of use), and the thickness of each brush should not exceed 1mm; After the previous one is slightly dry, the next one is brushed (just non-sticky, generally at an interval of 1-2 hours), and the front and rear vertical cross brushing, the total thickness of the brush is generally 1-2mm; If the coating has already cured, moisten it with water first when applying another layer.

Curing: After 24 hours of construction, it is recommended to cover the coating with a damp cloth or spray water to cure.

Protection: Before it is completely dry after construction, please take protection against trampling, rain, exposure to the sun, sharp damage, etc.

Inspection (closed water test): Toilets, pools and other parts should be filled with water for 48 hours after the waterproof layer is dried (at least 24 hours in summer, at least 48 hours in winter) to check whether the waterproof construction is qualified. Lightweight walls must be tested for watering.

In addition to the purchase of guaranteed waterproof products, the quality of waterproof construction is also a major reason for the waterproof effect, so it is also very important to choose a qualified construction unit. The specific choice of which one depends on the needs and use functions, and it is recommended to look at several brands when purchasing, don't be too troublesome. It would be good to choose the right one for you according to your own economic strength, and I believe that you can buy a waterproof material that you are satisfied with!

Oh, there are several ways to waterproof swimming pools: 1. Hard waterproofing: the entire swimming pool is poured with waterproof concrete; 2. Membrane waterproofing:

Use waterproofing membrane and matching adhesive to spread 2 or 3 layers on the inner wall and bottom of the swimming pool, and then the surface is tiled; 3. Waterproof coating film: apply waterproof paint to the inner wall and bottom of the swimming pool 2 or 3 times (generally the thickness should be greater than 2 mm), and then the surface is tiled; 4. Epoxy overall waterproofing: use epoxy resin to coat the inner surface of the swimming pool, paste fiberglass cloth, load the map, and then paste, do 3 4 layers (the general thickness should be greater than 2 mm), and then the surface is tiled;

1. Hard waterproofing: the whole swimming pool is poured with waterproof concrete; 2. Membrane waterproofing: use waterproof membrane and matching adhesive to spread 2 3 layers on the inner wall and bottom of the swimming pool, and then paste tiles on the surface; 3. Waterproof coating film

Use waterproof paint to coat the inner wall and bottom of the pool 2 or 3 times (generally the thickness should be greater than 2 mm), and then the surface is tiled; 4. Epoxy overall waterproofing: use epoxy resin to coat the inner surface of the swimming pool, paste fiberglass cloth, load the map, and then paste, do 3 4 layers (the general thickness should be greater than 2 mm), and then the surface is tiled;

There are several types of swimming pool waterproofing materials:

1. Hard waterproofing: the whole swimming pool is poured with waterproof concrete;

2. Membrane waterproofing: use waterproof membrane and matching adhesive to spread 2 3 layers on the inner wall and bottom of the swimming pool, and then paste tiles on the surface;

3. Waterproof coating film: apply waterproof paint to the inner wall and bottom of the swimming pool 2 or 3 times (generally the thickness should be greater than 2 mm), and then the surface is tiled;

4. Epoxy overall waterproofing: use epoxy resin to coat the inner surface of the swimming pool, paste fiberglass cloth, load the map, and then paste, do 3 4 layers (the general thickness should be greater than 2 mm), and then the surface is tiled;

If you want to choose the right waterproof material for the swimming pool, we recommend Keshun waterproofing.

As the company's core main business, Keshun waterproof has formed a waterproof material research and development, manufacturing, sales as the main body, including technical services and engineering services of multi-format combination, the company is now the vice president of the China Building Waterproof Association, has been elected as the top 500 real estate preferred waterproof material brand for 10 consecutive years, has signed strategic cooperation agreements with more than 100 well-known real estate companies such as Country Garden, Vanke, Sunac China, Greenland Holdings, China Shipping, Shimao, Longfor Group, China Merchants Shekou, etc., ranking among the top three in the industry's comprehensive strength.

1. Hard waterproofing: the whole swimming pool is poured with waterproof concrete; 2. Membrane waterproofing: use waterproof membrane and matching adhesive to spread 2 3 layers on the inner wall and bottom of the swimming pool, and then paste tiles on the surface; 3. Waterproof coating film

Use waterproof paint to coat the inner wall and bottom of the pool 2 or 3 times (generally the thickness should be greater than 2 mm), and then the surface is tiled; 4. Epoxy overall waterproofing: use epoxy resin to coat the inner surface of the swimming pool, paste fiberglass cloth, load the map, and then paste, do 3 4 layers (the general thickness should be greater than 2 mm), and then the surface is tiled;

There are more than 1,000 square meters of surf pools to make the bottom waterproof.

1. Polyurea coatingsPolyurea coatings adopt a one-time coating process, no matter how large the area is, there is no link seam, and it is also a dust-free material polyurea coating, which has the characteristics of strong adhesion, friction resistance, and strong hardness. 2. Propylene coating propylene waterproof coating is a one-component water-emulsion waterproof coating prepared by adding other additives with pure propyl polymer emulsion as the base material. 3. Epoxy resin paintEpoxy resin paint is a coating with epoxy resin as the main film-forming substance.

There are many types with their own characteristics. Self-drying one-component, two-component and multi-component liquid epoxy coatings are classified by curing; Baking one-component, two-component liquid epoxy coatings; Powder epoxy coatings and radiation-curing epoxy coatings. According to the state of paint, there are solvent-based epoxy coatings, solvent-free epoxy coatings and water-based epoxy coatings.

In fact, polyurea coatings have the best weather resistance when used in swimming pools, but the cost is relatively high, and the most cost-effective is class C coatings.

The best way to use Rongke swimming pool waterproof adhesive film for swimming pool waterproofing is swimming pool waterproofing.

Rongke swimming pool film focuses on 10 years of R&D and manufacturing, waterproof PVC swimming pool membrane, made of high-quality PVC material, with good elasticity, can effectively avoid pool water infiltration caused by pool sedimentation.

The service life is relatively high, and at the same time, it will not scratch people like traditional tile pools, which is conducive to safe use. The soft material makes people feel more comfortable in the water. Customers enjoy the experience more and increase the repeat experience rate.

The swimming pool adhesive film is composed of four layers of structure, interlocking, each layer has its characteristics and advantages, composed of varnish protective layer, printing layer, high-strength polyester high polymer fiber cloth reinforcing ribs, PVC bottom layer, strong and durable, 15 years waterproof guarantee, not easy to break. Therefore, the replacement cycle of the swimming pool film is short, the care cost is low, and the cost of operation and maintenance is saved.

The waterproof adhesive film is a plastic film installed at the bottom of the pool, which is mainly used in the inner wall and bottom of swimming pools, water parks, wave pools, children's paddling pools, landscape pools, hot springs, baths, spas, hydrotherapy and other wading places. Every year, it can reduce a lot of additional expenses such as repairing swimming pools, reduce operating costs, and the swimming pool film becomes common because of its practicality, so relatively speaking, the swimming pool waterproof film is the best to use Rongke swimming pool waterproof film.

Precautions for building a swimming pool:

1. The construction of the swimming pool must first obtain a residential building permit, then select a suitable location, and then have a basic design for the swimming pool, the length, width and depth must be considered according to the place, and then the swimming pool contractor will mark and excavate the site before the construction can begin.

2. The bottom of the swimming pool is made of cement, the plastic wall structure is used, and the bottom of the vinyl pool is used as a lining, and the necessary pipeline devices are also required to be installed, and the water circulation and filtration system of the swimming pool are set up to ensure the water injection, sewage and water transportation of the swimming pool. After the construction of the swimming pool is completed, the swimming pool needs to be filled with water to check whether the pipes are leaking or other faults, so that they can be repaired in time.

3. Daily maintenance is required, in order to control the pollution of harmful bacteria and viruses, it is necessary to put an appropriate amount of disinfectant in the swimming pool, and at the same time, it is necessary to regularly drain water, change water, clean the bottom and wall of the pool and salvage floating objects to ensure the cleanliness of the water.

4. A certain amount of safety management is required, and the swimming pool needs to be equipped with a certain number of lifeguards and life-saving equipment, and safety signs should be set up. <>

1. Hard waterproofing: the whole swimming pool is poured with waterproof concrete;

2. Membrane waterproofing: use waterproof membrane and matching adhesive to spread 2 3 layers on the inner wall and bottom of the swimming pool, and then paste tiles on the surface;

3. Waterproof coating film: apply waterproof paint to the inner wall and bottom of the swimming pool 2 or 3 times (generally the thickness should be greater than 2 mm), and then the surface is tiled;

Summary. 1. Hard waterproofing: the whole swimming pool is poured with waterproof concrete; 2. Membrane waterproofing: use waterproof membrane and matching adhesive to spread 2 3 layers on the inner wall and bottom of the swimming pool, and then paste tiles on the surface;

3. Waterproof coating film: apply waterproof paint to the inner wall and bottom of the swimming pool 2 or 3 times (generally the thickness should be greater than 2 mm), and then the surface is tiled; 4. Epoxy overall waterproofing: use epoxy resin to coat the inner surface of the swimming pool, paste fiberglass cloth, load the map, and then paste, do 3 4 layers (the general thickness should be greater than 2 mm), and then the surface is tiled;

Hello! I'm glad to answer your questions! Reply to your tenant within 5 minutes (we are all manual replies).

1. Hard waterproofing: the whole swimming pool is poured with waterproof concrete; 2. The waterproof fiber spike membrane and the supporting adhesive are spread on the inner wall and bottom of the swimming pool with 2 or 3 layers, and then the surface is erected and then tiled. 3. The waterproof coating for waterproofing is applied to the inner wall of the swimming pool and the bottom of the pool 2 or 3 times (generally the thickness is greater than 2 mm of Xiangbu), and then the surface is tiled.

4. Epoxy overall waterproofing: use epoxy resin to coat the inner surface of the swimming pool, paste fiberglass cloth, load the map, and then paste, do 3 4 layers (the general thickness should be greater than 2 mm), and then the surface is tiled;