Ask for the walkie talkie manual, how to use the walkie talkie

Refer to the instruction manual of the North Peak walkie-talkie.

2. When wireless communication equipment is not equipped with antennas, it is forbidden to transmit;

3. The handheld radio station cannot be transmitted when charging, and the power switch should be turned off and recharged;

4. When you don't receive a call signal, don't ask and scream, and don't contact horizontally;

5. When the signal is not clear, the holder can change his position, move forward, backward, left and right, and find the best communication position; The on-board radio station in motion can use the method of slowing down the vehicle or stopping the driving to enhance the sensitivity and improve the call effect;

6. It is strictly forbidden to use the hand-held radio station within one meter from the high-power radio station to prevent the horn from being burned out; When using a handheld radio, stay away from the computer to avoid interference;

7. The voltage range of use, the handheld station is DC, the fixed station and the vehicle station are DC 12V, when using the external power supply, the voltage outside the voltage range must not be used, otherwise the radio station will be damaged;

8. The charger of the handheld radio station cannot be used for charging other batteries, and the radio station cannot use ordinary batteries to prevent "electric water" from entering the radio station and rotting the radio station, and the battery of the handheld radio station shall not be diverted for other purposes;

9. Pay attention to the position of the radio microphone to avoid the microphone being in a constant state, 9. Pay attention to the position of the radio microphone to avoid the microphone being in a regular state, interfering with communication work and causing the radio station to burn out.

Several parties of the intercom dial to the same channel. The initiator of the intercom press and hold the intercom button to send the call, and then release the button after the end, waiting to receive a reply from the other party. The answering party also holds down the intercom button to send the call, and releases the button after speaking and waits for a reply.

People on the same channel can listen to the speech in the channel, and they can also press the intercom button to insert the call.

1. First of all, there will be three buttons on the walkie-talkie, which are volume switch, frequency adjustment, and speech button, we must first turn on the walkie-talkie, adjust the knob, and through the knob, we can also adjust the sound size of the walkie-talkie.

2. The channel needs to be adjusted is the same as the friend's channel, we adjust another knob, if there is often noise and other phenomena, it is generally a conflict with other people's channels, so you need to change a new channel.

3. When we adjust it and can generally use it normally, the walkie-talkie will have a prompt, for example, this one is displayed in green.

4. When we need to speak, press the button on the side of the fuselage, the light will turn red, we will be able to speak, and the other party will be able to hear your voice.

01 Under normal circumstances, there are three switch knobs that need to be used in the walkie-talkie, and the hand is located on the left side of the top of the walkie-talkie, which is the volume switch; The right side of the top of the walkie-talkie is a frequency modulation switch; On the side of the walkie-talkie, it is a button talking switch.

First of all, when turning on the machine, first turn the switch knob clockwise, there is an obvious start-up sound, and the indicator light will flash green once, and then adjust to the appropriate volume. Then adjust the walkie-talkie to the same channel, if there is frequent noise, then it is likely to conflict with other people's walkie-talkie channels, you can switch to other channels to avoid interference. When receiving communication from someone else, the indicator light flashes green.

When you need to speak, press and hold the send button to start communicating, and release the call button in time when you are finished. So that what you say is received by others.

02 When the walkie-talkie is charged with a dock charger, the charger indicator is red and does not flash, it is normal charging, and when it turns green, it means that the charging is complete. If the indicator light flashes, it is likely that the walkie-talkie is not in good contact with the charger, so you can plug it back in and charge it. The walkie-talkie is generally composed of the main unit, antenna, earphone, battery, and lanyard.

Some walkie-talkies have a distance limit, and the distance exceeds the selection range, and the message cannot be received.

03 There are FM knobs on the walkie-talkie in the shouting, and under normal circumstances, there are about 10 channels for ordinary brands to reduce prices. Therefore, a call channel is specified, so that all the people holding the walkie-talkie can rotate the frequency switch and tune to the same channel, and the communication between two or more parties can be realized.

Turn the switch knob clockwise to turn on the walkie-talkie, and then adjust the channel of the walkie-talkie to the same channel as your communication walkie-talkie, when receiving other people's communication, the indicator light of the walkie-talkie will flash green. When you need to speak to others, press and hold the send button to speak, and release the call button in time after speaking.

How to use the walkie-talkie:

1. The main keys used in the walkie-talkie are switches and three knobs. The knob on the left side of the top is the switch, and the volume can also be adjusted, the knob on the right side of the top is responsible for adjusting the corresponding channel, and the button on the side of the walkie-talkie is the send button.

2. Turn on the walkie-talkie, you need to rotate the switch knob clockwise, there is an obvious boot sound and the indicator light will flash green once, and then we can manually adjust the appropriate intercom volume.

3. Adjust the channel of the walkie-talkie to the same channel as your communication walkie-talkie, if there is frequent noise, it may conflict with other people's walkie-talkie channels, at this time we need to change to other channels.

4. When we receive communication from others, the indicator light of the walkie-talkie will flash green.

5. When we need to speak to others, we need to press and hold the send button to speak, and release the call button in time after speaking.

Precautions: 1. When the walkie-talkie is transmitted, keep the walkie-talkie in a vertical position and keep the microphone at a distance of centimeters from the mouth. When firing, the walkie-talkie is at least centimeters away from the head or body.

If the walkie-talkie is carried on the body, the antenna is at least centimeters away from the body at the time of transmission.

2. Do not turn on and off multiple times during use, and adjust the volume to a volume suitable for your hearing.

There are many walkie-talkies in work, so this time I will briefly explain the use of walkie-talkies.

There are three main switches or knobs used in walkie-talkies. The knob on the left side of the top is the switch, and the volume can also be adjusted, and the knob on the right side of the top is responsible for adjusting the corresponding channel; The button on the side of the walkie-talkie is the send button.

When turning on Hail Oak, turn the switch knob clockwise, there is a clear start-up sound and the indicator light will flash green once, and then adjust to the appropriate volume.

Then adjust the walkie-talkie to the same channel, if there is frequent noise, it may conflict with someone else's walkie-talkie channel, you can switch to other channels to avoid interference.

When receiving communication from someone near the source, the indicator light flashes green.

When you need to speak, press and hold the send button to start communication, and release the call button in time after speaking.

If you use a cradle charger for charging, the charger indicator is red and does not flash, it is normal charging, and when it turns green, it means that the charging is complete. If the indicator light flashes, it is likely that the walkie-talkie is not in good contact with the charger, and it needs to be plugged in again for charging.