How long does it take to learn car wraps? How many test methods do you usually study?

Generally, junior technicians can only apply film to the side windows, while only intermediate and senior technicians can apply film to the front windshield with a large curvature.

Before the film, it is necessary to check whether the installation of the window glass is intact and the integrity of the car glass to ensure that the subsequent film work can operate normally.

Be sure to cover the necessary parts of the car before applying the film to prevent liquid from penetrating. Sprayed cleaning fluids and lubricating fluids can affect trim parts such as automotive electronics and interior seats.

Wash the interior and exterior surfaces of the windows before applying the film (focusing on the interior surfaces and glass sealant areas). This is mainly to eliminate the dirt or other object construction quality problems between the heat insulation film and the window glass after the film, and ensure that the film and glass can be perfectly combined.

The membrane is pre-cut. Use a ruler to measure the size of the front and rear windshields, and cut the film according to the measured size. (The professional film mechanism is through the computer, which is tailored according to the model).

Spray the installation fluid. Dust spots can be avoided and corrosion at the edges can be reduced, resulting in the desired viscosity and better application results.

Dry roasting, wet roasting shaping. The film is dry-roasted first so that the film can be fully pre-shrunk. In order to further improve the adhesion of the heat insulation film, it is also necessary to wet bake and shape the heat insulation film.

Extrusion of the installation fluid: In the process of using the wiper to remove the installation fluid, try to scrape the installation fluid between the heat insulation film and the window glass, which can reduce the drying time of the heat insulation film and obtain a better bonding effect, overall performance and visual effect.

Check after sticking. "Three looks and one attention": look at the entire heat insulation film to see if there is any dust and bubbles, see whether the corners are firmly glued, and sit in the car to see if there are any places that affect the line of sight (especially the front windshield and side windshield). After the film, it is recommended not to raise or lower the glass arbitrarily within 48 hours.

The most important thing to pay attention to when applying the film is the use of hair dryer, if you blow this place for a long time, it will cause the glass to crack due to uneven heating. Therefore, it is necessary to find those professional authorized stores for the film, so that the quality of the film will be the best and the danger of glass cracking can be avoided.

Also, the car film is best in rainy weather, and when it is pasted on rainy days, there is very little dust in the air, which has certain benefits for aesthetics.

In the case of glass film, it usually takes 15 to 30 days. It depends on the individual's comprehension ability and personal hands-on ability, and the general test method is dry baking. Water roasted.

There are vertical roasts and horizontal roasts. There are also some lifting roasts. Rinse the roast and so on.

Hope mine is that you help thanks.

Hello, if you go to a professional school to study, you can learn it in two weeks at the earliest, at least two basic baking methods, of course, like this kind of relatively high technical requirements, it generally takes a long time to accumulate experience.

How long to study mainly depends on the individual's receptivity, and it is about the same to study for two weeks in a professional auto repair school, and there are at least two kinds of test methods.

Generally, it is about three months to learn vertical and horizontal roasting.

In addition to professional technology, the experience of the film teacher also needs to have standard requirements, in addition, for the experienced film master, different models and different materials use different film methods. Therefore, the income of this industry is generally high, and many people want to learn, so how long does it take to learn car film?

Generally, if you go to school to learn, it will be almost the same for two or three months, the school's equipment and training consumables are relatively richer, and the training operation is more, which is naturally more convenient, and it can be learned in two or three months, and then it is the accumulation of experience.

If you go to a physical store to learn, the business is good and often the film is often learned for half a year to a year, the premise is that people are willing to teach you, because the physical store receives the limitation of materials, the opportunity to practice is relatively less, more for you to see.

Of course, whether you learn in a physical store or in school, only by learning the technique hard and steadfastly, can you really master this technology, you can't fish for three days, dry the net for two days, only continuous persistence, continuous consultation, and continuous practice are the most important.

If you learn to film in general, it takes about 3 months to study in school, but it is not enough to learn theory, practical operation is still very important, if your practical training is too little, it will be difficult to find problems on the mobile phone, and now the film out of the car door is complete in addition to a large piece of paste, there are many corners, you have to cut it or your film will not fit very well. So it takes a lot of work, as long as you are willing to work hard, I believe that in the future, you will definitely succeed in learning. Hope.

The film is most afraid of dust and gravel, and it is difficult to clean the environment when working on the street. The rear windshield of the car is curvature, the glass of the imported car is large, and the arc is greater. Use a special tool and a heat gun to bake the film on the outside of the rear windshield to the same arc as the rear windshield, and then paste it on the inside of the car.

The use of the heat gun to shape it, this step is also more critical, and it is easy to make mistakes, because the temperature and shaping techniques of the heat gun have relatively high requirements, otherwise improper use can easily lead to blackening of the car film or glass breakage.

It is recommended to go to a professional car study to learn systematically, generally if you go to school to learn, it will be almost the same for two or three months. Time is worth more, and I hope the information I provide will be helpful to you.

The general learning time of the film is 15 days to 2 months, depending on your ability to do it yourself, but it is generally learned in our school, and the tuition fee also includes consumables.

Hello, there are three questions to share about how long it takes to learn to apply film:

The first is to learn the film technology in the professional school, the film needs to be improved or improved through practice, if there is no practice, it is difficult to learn, find a professional school to learn this, and the time is short. You can only learn to apply the film for a month or two.

The second is that it takes time to learn to paste the film, which is generally started by cutting the film, that is, the practice of knife technique, then the small corner glass, followed by learning to bake the film and paste the side window, then the in-depth baking film and sticking the back block, and finally the proficiency of the baking film and the front block, each link needs to be practiced;

The third is to look at the degree of opportunity and their own efforts, the growth of the film is relatively fast, of course, it also needs their own diligence and efforts. Please contact me if necessary. Hope.

There are many factors that can influence. Whether you are willing to learn or not, where to learn, etc.

Generally, if you go to school, it will be about the same for two or three months. Then there's the accumulation of experience.

If you go to a physical store to learn. If you have a good business, you will learn to apply the film for half a year to a year, provided that people are willing to teach you.

Generally, if you go to school, it will be about the same for two or three months. Then there's the accumulation of experience.

If you go to a physical store to learn. If the business is good, you will learn to apply the film for half a year to a year, provided that people are willing to teach.

Applying the film to the school for theoretical and practical learning, generally 2 months is enough.

This car film should be very simple, and it can only be learned in about a month, but if you want to learn it well, you have to keep practicing and working hard.

Summary. Hello dear, it takes two or three months to learn car film. Car film is a difficult technical job, the process of film will also affect the final effect, if not necessary, it is best to leave the film work to an experienced master to complete. <>

How long does it take to learn <> car wrap.

Hello dear, car film to learn two Yin Chang in the first three months to be able to learn. Car film is a difficult number of technical work, the process of film will also affect the final effect, if not necessary, it is best to hand over the film work to the master who has rich experience in the film to complete. <>

The functions of the <> car state opening film are as follows: 1. Block the heat generated by infrared rays. 2. Block ultraviolet rays to prevent damage.

3. Safety and explosion-proof, the base layer of the automotive film is polyester film, which has the function of tear-resistant and anti-breakdown. 4. Retain privacy and sail safety. 5. Reduce the load of air conditioning.

6. Reduce the accidents caused by glare factors. <>

<> maintenance and precautions of car film are to avoid opening windows as much as possible within a few days after the car film. It takes 5-7 days for the film to be firmly attached to the window, so the film edge is easy to warp during the window opening and closing, and the film that has not been fully bonded is also easy to shift. If there is a stain on the surface of the film, never wipe it with a chemical solvent.

It is best to wash with a damp towel, a paper towel moistened with water, or a cotton cloth moistened with detergent, and avoid using abrasive items and tools that can scratch or damage the thin residual film. [Big Red Tease Finger Returning to Flower Mountain Hunger] <>

About a month, now is the era of automobiles, the development of popular life and society needs cars to protect, engaged in the car maintenance and repair industry, learn car beauty maintenance technology, learn the time is ripe to open such a car maintenance shop prospects are also good.

Learn car film, there are half a month and a month. The learning time for film is relatively short. The technology is easy to get started with. Entry-level technology for the car detailing industry.

If you don't have a foundation, go to a regular school to study for a year and a half, car film is to paste a layer of film-like objects on the front and rear windshields, side windows and sunroofs of the vehicle, and this film-like object is also called solar film or explosion-proof heat insulation film.

Learning something depends on a person's IQ. If you are a person with a high IQ and willing to learn, you will receive what you learn quickly and easily learn; On the contrary, if you are willing to learn, you will learn it slowly. I learned the car wrap in a week.

This job, very simple, mainly careful is easy to learn, I think the ability to accept fast, the basic essentials can be mastered in one day, the method proficiency needs at least a week, skilled models for a month! It shouldn't be a problem!

Generally, if you go to school, 45 days of study is about the same. Then there's the accumulation of experience.

If you go to a physical store to learn. The right to a good business often sticks the film to learn for half a year to a year, provided that people are willing to teach you, and the specific learning time depends on the degree of personal mastery.

It is not a long time to learn car film alone, if you study seriously, you can learn it in half a month to a month, the development prospects of the car beauty industry are now relatively good, you also consider learning all the content of car beauty, a little suggestion I hope to help you, hope to adopt!