What does it mean when WiFi is not connected to the internet

No internet connection after wifi connection.

The wifi is not connected to the internet, which means that it cannot carry out processes that require data consumption.

Causes: 1. The network service may be suspended due to broadband arrears.

2. The network connection may be unstable due to loose network cables.

3. The network card may be damaged, resulting in network disconnection.

4. It may be that the network cable is not plugged in, resulting in the inability to connect to the network.

5. It may be that the wifi antenna is broken, resulting in the inability to receive the wifi signal.

2. Reseat the network cable once.

3. Turn off the cat and the wireless router and turn them on, and look at them later.

4. Reset the wireless router.

5. You can go to a computer store and buy a new router.

Extended Information: Wireless Router Error Causes:

1. It may be because the LAN port IP of the wireless router and the IP of the cat are the same IP, which may cause the number to be dialed may not be available.

2. It may be a problem with the ISP provider's settings, you can clone the MAC address of the computer network card to the WAN port of the wireless router.

The wifi is not connected to the Internet, please do it:

1. Please confirm whether the DHCP function is turned off in the router, and you can get the IP address correctly after turning on this function.

2. Check whether other devices can connect to the wireless network and rule out whether it is a router problem.

3. If other machines can be connected, please operate: go to Settings - WLAN Settings - Tap and hold the network you need to delete - Forget Network Delete the network, and then reconnect to WLAN.

4. Restart the phone and router separately.

5. If you still can't connect to the wireless network, it is recommended to use a static IP to try, the way: Settings - WLAN - Select a wireless hotspot - Show advanced options - Tick - Swipe down the screen - IP setting - Static - IP address Gateway.

6. Try to replace another router.

The wifi shows that there is no Internet connection, that is, there is no network signal, and the Internet is not available.

Workaround: Just reconfigure.

The specific steps are as follows:

1. Click on the lower left corner of the computer desktop - Start - Control Panel.

2. Find the Windows Firewall option in the control panel, here is the relevant settings of the firewall. In the firewall settings that are clicked, it is generally recommended to enable (recommended) mode.

3. In the "exception" option, you can see some configurations of 360 portable wifi, which must be checked, otherwise there will be problems with the connection.

4. Then in "Advanced", you can see a network connection generated by this 360 portable wifi. This is the local connection 4, this place should be checked off, and it can be configured.

5. Take a look in the lower right corner, as shown in the figure, what you see in this position is your 360wifi name, and finally the computer is restarted, you can solve the problem of wifi display without Internet connection.

Wi-Fi without an internet connection means that the Wi-Fi device (router) to which a wireless device such as a mobile phone or computer is currently connected is not connected to the Internet, which means that the phone is connected to Wi-Fi but cannot access the Internet. The problem is not on the phone, but on the wifi: it may be that the router is broken, or the interface is loose, and of course it is also possible that the broadband is expired.

Keep in mind that the wifi signal is sent by the router, which is just a medium for surfing the Internet such as mobile phones.

Summary. No internet connection on the line means no wifi connection. Take the Huawei P40 of the EMUI11 system and the iPhone 11 of the system as an example, if the mobile phone cannot connect to the WiFi, you can enter the system settings page, click on the WLAN, click on the WiFi that cannot be connected, select "Cancel Save", and then re-enter the password to connect.

Mobile phone usage skills: 1. OnePlus 7 has a screenshot function, press and hold the "volume down button" and "power button" at the same time, you can take a screenshot, or you can use three fingers to take a screenshot to buy.

2. OnePlus 7 has built-in dual-band dual-antenna GPS, which can improve positioning accuracy.

3. OnePlus 7 has airplane mode, swipe down from the top of the screen and tap "Airplane mode" to use it.

4. OnePlus 7 can set the battery percentage, enter the system settings page, click the display option, click the "status bar", click the "battery percentage display", and turn on the function to complete the operation.

wifi shows what no internet connection means.

Hello, I have seen your question and am sorting out the answer, please wait a while

No internet connection on the line means no wifi connection. Take the Huawei P40 of the EMUI11 system and the iPhone 11 of the system as an example, the mobile phone cannot connect to the WiFi, you can enter the system settings page, click WLAN, click the WiFi that cannot be connected, select "Cancel Save", and then re-enter the password to connect. Tips for using your phone:

1. OnePlus 7 has a screenshot function, press and hold the "Volume Down Button" and "Power Button" at the same time to take a screenshot, or you can use the three-fingered Qihui to take a screenshot to buy. 2. OnePlus 7 has built-in dual-band dual-antenna GPS, which can improve positioning accuracy. 3. OnePlus 7 has airplane mode, swipe down from the top of the screen and tap "Airplane mode" to use it.

4. OnePlus 7 can set the battery percentage, enter the system settings page, click the display option, click the "status bar", click "battery percentage side dust display", and turn on the function to complete the operation.

In fact, it means that the WAN port of the router is set incorrectly.

To be inserted in the first few ports.

Tell me quickly.

Can I say I can't read it?

I look at it. The first.

Then give them all a try.

Solved, thanks.

It's good to solve it.

Have a great day.

WiFi No Internet Connection means Wifi is not connected to the Internet.

It means that the wifi is not connected to the internet, and the phone cannot connect to the wifi. That is, it is not possible to carry out processes that require data consumption.

The main causes of the problem are as follows:

1. The network service may be suspended due to broadband arrears.

2. The network connection may be unstable due to loose network cables.

3. The network card may be damaged, resulting in network disconnection.

4. It may be that the network cable is not plugged in, resulting in the inability to connect to the network.

5. It may also be that the wifi antenna is broken, resulting in the inability to receive the wifi signal.

Solution: First, call the operator's customer service** to see if there is a problem with the broadband. Second, reseat the network cable. Third, turn both the cat and the wireless router off and on, and look back on it later. Fourth, reset the wireless router. Clause.

5. You can go to a computer store and buy a new router.

Internet connection process:

1. On the desktop, click Start, Control Panel, View Network Status, and View Tasks.

2. Enter the new interface and click to set up a new connection or network.

3. Click Connect to the Internet and Next.

4. Click Broadband (PPPOE) (R).

5. Enter the username and password given by the operator.

6. Click Connect to connect to the network. Brigade sells <>

1. It means that the wifi is not connected to the Internet in Yanzhou, and the mobile phone cannot connect to the wifi. That is, it is not possible to carry out processes that require data consumption.

2. The main causes of the problem are as follows: it may be the suspension of network service due to broadband arrears; It may be that the network cable is loose, which causes the network connection to be unstable. The network card may be damaged, causing the network to be disconnected.

It may be that the network cable is not plugged in, which is causing you to be unable to connect to the network. It is also possible that the wifi antenna is broken, resulting in the inability to receive the wifi signal.

Third, turn both the cat and the wireless router off and on, and look back on it later. Fourth, reset the lineless limb attacker. Clause.

5. You can go to a computer store and buy a new router.