Longines Service Center, Longines Service Center Telephone

What to do if the watch gets water.

It is normal for the watch to get water, if the water is not serious, but there is a layer of fog in the watch glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, and bake it for about 30 minutes at a distance of 15 cm from a 40-watt light bulb to eliminate water vapor. Do not bake the watch mask directly close to the fire, so as not to deform the watch by heating. You can also put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the moisture can be eliminated after two hours.

Of course, there are also some daily repair methods for watches to get into the water:

1. Dry the granules with silica gel. If water enters the case, you can use a granular substance called silicone to put the watch in an airtight container with the waterlogged watch, and after a few hours, remove the watch and the water will disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch.

The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

2. Bake with a light bulb. If the water ingress is not serious, but there is a layer of fog in the surface glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes to eliminate the moisture. Do not bake the watch mask directly close to the fire, so as not to deform the watch by heating.

3. Wear the watch backwards. You can also put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the moisture can be eliminated after two hours. If the water ingress is severe.

Tianjin Longines after-sales maintenance center address is in Tianjin Heping District Chifeng Road No. 136 Tianjin International Financial Center 30th Floor Room 3003, the service center accepts national mailing service, if there is mail, please contact the center in the mail. You can call 022-27122725 for more information.

Way. 1. If the watch is soaked in water, you can use several layers of toilet paper or fluffy cotton cloth that is easy to absorb moisture to wrap the watch tightly, put it near a 40-watt incandescent lamp about 15 cm, bake for about 30 minutes, and the water vapor in the watch can be water vapor. Avoid baking the watch on the wrist close to the fire, so as not to cause the watch to suffer thermal deformation.

Way. 2. The watch is worn inwards and the bottom case outward, and the water vapor can be eliminated after two hours. If the water ingress is severe, it is best to send it to the watch shop immediately to wipe the oil and sweep away the nutrients of the movement to prevent the parts from rusting.

Way. 3. Use granular silicone to put the watch on the wrist that has accumulated water into a tightly sealed utensil, and after a few hours, take the watch on the wrist, and the water will disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch.

The silica gel that has absorbed water many times can be dried at 120 for several hours, and the water absorption experience is renewable, and it can be used again and again.

If the watch is flooded, it should be sent to the service center for repair in time, so as not to corrode the inside of the movement and increase the maintenance cost over time.

The address of Chengdu is in Room 05, 24th Floor, Sichuan Aviation Plaza.

The service center provides Longines watch strap customization, cleaning and maintenance, identification, refurbishment, fault repair, watch exterior parts damage replacement, strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

There are several phenomena or degrees of water ingress into the watch:

1) There is fogging in the glass of the watch, and there may be some times and sometimes not, especially when the temperature difference is large.

2) There are water droplets condensing in the watch glass.

3) A large number of water droplets can be seen on the glass and dial of the watch.

There are also several properties of the water into which the watch is ingressive

1) Purified or distilled water.

2) Tap water or rainwater.

3) Drinks or beer.

4) Sea water. 5) Cosmetics or chemical reagents or potions.

When choosing a maintenance point, users of this kind of expensive watch must choose a regular and professional maintenance point, so as not to bring losses to themselves and the watch, and the most important point is that the cost of different models of the same watch is also different, it is recommended to consult in detail.

What should I do if my watch gets water?

1. If the watch is soaked in water, you can wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, put it at about 15 cm near a 40-watt light bulb, and bake it for about 30 minutes, and the water vapor in the watch can be eliminated.

2. Put it in a rice jar and bury it deep in the dried rice for a period of time, if it is fast, you can see obvious results in one night.

3. You can use a granular substance called silica gel to put it into a closed container with the watch that has accumulated water, and after a few hours, take out the watch, and the water will disappear.

4. Take a hair dryer to dry, and then apply a layer of transparent nail polish on it to avoid impurities and prevent rust.

5. If there is water vapor in the watch, you can wear the watch face inward and the bottom shell outward, and wear it on the wrist to eliminate the water vapor in two hours. If there is too much water in the watch, the case must be opened and scrubbed. If you are not sure to deal with it yourself, you should send it for repair in time.

1. Use silica gel to dry the granules. If water enters the case, a granular substance called silicone can be used to put the watch in an airtight container with the water that has accumulated water, and after a few hours, remove the watch and the water will disappear. This method is simple and economical, and the accuracy and longevity of the watch will not be compromised in any way.

The silica gel, which has been absorbed many times, can be dried at 120 degrees for several hours, has a renewable water absorption capacity, and can be used again and again.

2. Bake with a light bulb. If the water ingress is not serious, but there is a layer of fog in the surface glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the table tightly, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes, which will eliminate the moisture. Be sure not to bake the watch mask directly near the fire to prevent the watch from being deformed by heat.

3. Wear the watch backwards. You can also wear the mask with the cover facing inward and the bottom shell facing outward, and wear it on the wrist, and the moisture will be eliminated after two hours. If the water ingress is severe.

4. Send it to the watch shop to wipe the oil. None of the above three methods can remove water vapor, and it should be sent to a repair shop immediately to wipe the oil to remove moisture from the movement and prevent rust on the parts.

5Dry with a hair dryer, the temperature should not be too high, and the wind will be mild until the moisture on the glass is not visible.

Longines Service Center hasShanghai Huangpu Longines Maintenance Center, Shanghai Xuhui Longines Maintenance Center, Shanghai Changning Longines Maintenance Center, etc.

1. Longines Maintenance Center, Huangpu District, Shanghai.

2. Longines Maintenance Center, Xuhui District, Shanghai.

3. Longines Maintenance Center, Changning District, Shanghai.

Introduction to the watch

The production and production of watches are based on a simple and witty invention, which is the "spring", which can tighten and store energy, and can slowly release the energy to push the running mechanism and hands in the watch to achieve the function of displaying the time, this spring mechanism in the watch is called the mainspring.

The principle of the watch is that the watch is a precision instrument used to indicate the time, and the principle of the instrument is to use a vibration system with a constant cycle and continuous vibration as a standard. If you know the time it takes for the vibration system to complete the full vibration of a watch (vibration cycle), calculate the number of vibrations.

The time elapsed after so many vibrations is equal to the vibration period multiplied by the number of vibrations. i.e. time = vibration period and number of vibrations.

Taking Shanghai as an example, Longines maintenance service outlets are as follows:

1. Longines Shanghai IAPM International Trade Direct Store2. Longines Shanghai Global Harbor direct store3. Shanghai Langteng Shanghai Nanjing West Road No. 1029 store

4. Shanghai Langteng Shanghai Pacific Xujiahui store

5. Shengshi Watch Store Shanghai New World Shopping MallFax: +86 (021) 53758099.

6. Shengshi Watch Store Shanghai New World Daimaru Department StoreLongines on the first floor of New World Daimaru Department Store, No. 228 Nanjing East Road, Huangpu District, Shanghai.

The above content refers to Longines - Customer Service.

Taking Shanghai as an example, Longines maintenance service outlets are as follows:

1. Longines Shanghai IAPM International Trade Direct Store2. Longines Shanghai Global Harbor direct store3. Shanghai Langteng Shanghai Nanjing West Road No. 1029 store

4. Shanghai Langteng Shanghai Pacific Xujiahui store

5. Shengshi Watch Store Shanghai New World Shopping Mall rolls offFax: +86 (021) 53758099.

6. Shengshi Watch Store Shanghai New World Daimaru Department StoreNo. 228 Nanjing East Road, Huangpu District, Shanghai, New World Daimaru Department Store was sentenced to Longines.

The above content refers to Longines - Customer Service.

East of Dongcheng District, BeijingRoom 807, 8th Floor, Block W3, Oriental Plaza, No. 1 Chang'an Street.

The Longines Service Center ensures the quality, performance and durability of your watch after maintenance or repair. The Longines Repair Center maintenance masters are trained to the highest standards of Haute Horlogerie.

Longines Service Centers have internationally recognized levels of certification, ensuring the required expertise as well as sophisticated technology. For any questions related to watches, you can contact our Longines Maintenance and Repair Service Center, which is located in Beijing, Shanghai, Guangzhou, Shenzhen, Tianjin, Chengdu, Wuhan, Changsha and other first-, second- and third-tier cities.

Advantages of Beijing Longines maintenance point:

Beijing Longines maintenance service point, elegant and comfortable environment, and equipped with professional service personnel for each visiting customer humanized, warm quality service, Beijing Longines maintenance service center for your Longines watch to provide free identification and Longines maintenance free service items.

Beijing Longines Repair Center has a professional technical team, and the watch repair technicians of Beijing Longines Repair Service Point go directly to Switzerland for training, or undergo strict standardized training in Switzerland in China, with exquisite skills and reduce customer worries. When your Longines watch has a time failure and parts are damaged, please go to the Beijing Longines repair station for repair and maintenance in time.

We strictly abide by the brand's unified charging standards, and the cost of maintenance and accessories is transparent. We want to provide you with the highest level of Beijing Longines watch repair and maintenance service. In the event of a mechanical or manufacturing failure, we offer you an extended warranty of 1-2 years.

Our professionals at the Longines Service Center in Beijing will provide you with the most prompt and reliable service.

Longines maintenance + service network inquiry.

Hello, it is a pleasure to serve you and give you the following answers: Longines maintenance service outlets can be queried through the official website or official channels, or through the search engine. Problems can occur due to damage or deterioration of the case, bracelet, crown, dial, movement, etc., or due to improper operation or contamination.

Workaround:1If it is due to the damage or aging of the case, bracelet, crown, dial, movement and other parts, the problem can be solved by replacing the new parts.

2.If it is caused by improper operation or pollution, the problem can be solved by cleaning, lubrication, adjustment, etc. Steps:

1.Inspect the case, strap, crown, dial, movement, etc., and replace them with new ones if they are damaged or deteriorated. 2.

Check if the operation is correct, if not, you can redo it. 3.Inspect the case, strap, crown, dial, movement and other parts for contamination, if there is contamination, it can be cleaned with detergent and lubricated with lubricant.

4.Check whether the case, strap, crown, dial, movement and other components have been adjusted, and if there are adjustments, they can be adjusted with professional tools. Personal Tips:

1.When using Longines watches, it is necessary to pay attention to the operation to avoid damage caused by improper operation. 2.

Regularly inspect the case, strap, crown, dial, movement and other components to find and deal with problems in time. 3.If you find a problem, you can go to the maintenance service outlets designated by Longines to ensure that you can.

Summary. Longines is a watch brand owned by the Swiss Swatch Group, and Longines is marked by a flying wing hourglass. Founded in 1832 in Soimia, Switzerland, Longines has more than 180 years of history and craftsmanship. In 1867, the first Longines factory was established; On May 10, 1880, Longines became a registered trademark in Switzerland.

Longines After-Sales Service Center**.

Longines Customer Service**400-670-1832 Longines is a watch brand owned by the Swiss Swatch Group, and Longines is marked by a flying wing hourglass. Founded in 1832 in Soimia, Switzerland, Longines has more than 180 years of history and craftsmanship. In 1867, the first Longines factory was established; On May 10, 1880, Longines became a registered trademark in Switzerland.

Longines Customer Service**400-670-1832 Longines is a watch brand owned by the Swiss Swatch Group, and Longines is marked by a flying wing hourglass. Founded in 1832 in Soimia, Switzerland, Longines has more than 180 years of history and craftsmanship. In 1867, the first Longines factory was established; On May 10, 1880, Longines became a registered trademark in Switzerland.

Can you check the time of the insurance card?