-
Anonymous users2024-02-06The positioning method of the TV pot is as follows:
After the position of the set-top box of the small pot lid is changed, the positioning method is as follows:
1. When the prompt window of "location information changed, please contact the customer service center" appears, you first need to restore the factory settings of Huhutong: open the "main menu" of Huhutong and find the "System Settings" item to enter.
2. From the pop-up "System Settings Need to Enter Password" window, enter the super management authority password "9999" and press the "OK" button on the remote control to enter.
3. Then switch to the "Factory Reset" tab, and press the "OK" button on the remote control to perform the factory reset operation.
4. Next, turn off the power of the set-top box and open its back cover, insert the local ** card (Unicom, mobile card) into the SIM card slot, and insert the smart card at the same time.
5. Turn on the power of the set-top box again, and turn off the power of the set-top box when the "Position module abnormal" prompt window appears on the screen.
6. Then reinsert the encryption card that comes with the set-top box, restart the boot, the set-top box will automatically search and restore the TV program, and at the same time, you will find that the TV program can be normal, you can remove the mobile phone SIM card, and use the set-top box to **TV program normally.
Precautions for installing a TV pot.
1. The TV pot should be installed in a relatively high place, so that there is no obstacle, and there should be no tall trees in front of it, otherwise it will easily cause the signal to weaken, if there is, the tree in front should be disposed of.
2. If the orientation adjustment is not in place, a signal receiver can be used to assist in the installation, so that the orientation is more accurate. If the signal is not good, pay attention to whether there is a problem with the line, whether the connection is good, if the connection is not good, pay attention to whether there is any problem at the joint.
3. Especially when there is strong wind, it is easier to blow the direction of the TV pot off, which will also cause signal problems. So fix it.
-
Anonymous users2024-02-05Positioning steps: 1. Assemble the antenna and install the high-frequency head, install and connect the antenna and the high-frequency head according to the manual, and let the seller help press the pot body, including the elevation angle.
2. Connect the cable on the set-top box with the cable on the TV.
3. Adjust the antenna elevation angle and azimuth angle, the elevation angle scale is equal to the antenna elevation angle of the previous preparatory work query minus 22°, if the scale on the antenna has been corrected the deflection angle, the queried angle is used.
4. Azimuth, due south and west, you have to aim the small pot at the satellite, very accurate, until the set-top box shows signal strength and signal quality, the higher the better, the so-called positioning is the user positioning, the machine positioning, once the machine will not be able to watch the program.
-
Anonymous users2024-02-04In the first step, you have to point the pot at the satellite, very precisely, until the set-top box shows the signal strength and signal quality, the higher the better.
The second step, the so-called positioning is the positioning of the user, the positioning of the machine, once the machine is moved, it will not be able to watch the program.
The method is as follows: insert the mobile phone card, (usually a large card, not cut) into the card slot on the machine, usually behind the machine. Then turn it on.
Press the menu - find the installation satellite, there are 5 items in it, press the red button on the remote control all the way until the authorization is successfully received, and you can use it!! , find in the menu, including installation, search for nearby base stations, upload information, **authorization, out of installation.
-
Anonymous users2024-02-03It used to be fixed, but now it's not in the positioning position, and there is a position change on the TV screen, can it still be repositioned?
-
Anonymous users2024-02-02There is no signal when the lid of the small pot is attached.
In fact, the reason for these problems is nothing more than software and hardware problems. The system of the mobile phone itself is bloated, poorly optimized, or there are bugs in the app, which may cause the software to lag when running. >>>More
How to deal with mobile phone stuck: 1. One-click acceleration to clean up the background software; 2. Clean up the memory of the mobile phone: (1) Enter the mobile phone i butler - mobile phone acceleration space management to clean the cache file; (2) Go to your phone settings -- more settings -- app management -- find the programs you often use (such as QQ, WeChat, etc.) -- store -- clear cache and data, and restart your phone. >>>More
If you are using a vivo mobile phone, if the size of the SIM card and the mobile phone card slot is not suitable, it is recommended to go to the local business hall and the staff will use a special card cutter to help cut the card or replace the card.
If it is a postpaid user or a mobile phone card handled through the telecommunications online business hall, then it needs to be activated and activated, and it can be activated and opened on the telecom handheld business hall, and the steps are as follows: >>>More
Play mobile phone game card, it is very likely that the memory is not enough, first use the mobile phone with the anti-virus software to clean up the memory, and then click on the phone settings - memory to view, if there is more memory left, it may be the problem of the mobile phone into the virus, maybe you have clicked on something**, or under the pirated software, try the anti-virus software first, but the mobile phone anti-virus software is generally not detected, if so, connect the computer with a data cable, let the computer 360 mobile phone manage the anti-virus, or no, it is recommended that you restore the factory settings. >>>More