The screen brightness of the Mate 10 cannot be adjusted automatically

Please confirm whether the [Auto] adjustment switch is turned on. If the [Auto] adjustment of brightness is not turned on, the screen brightness will not be adjusted automatically. Click [Settings] >Display] >Brightness] to turn on the [Auto] switch.

Confirm that you are not dragging the light bar too much. Please turn the Auto adjustment switch back on. When the ambient light changes, the algorithm will compensate for the brightness according to your preference, so the brightness of the screen will be close to the brightness you manually adjusted, and the [Auto] switch can be turned on again to clear your preference record.

Please make sure that the ambient light sensor on your phone is covered by a film or a foreign object. Please replace the appropriate film or remove the foreign object.

Please check that the brightness has not been adjusted in a third-party app (**, browser, etc.). Please quit the third-party app and try again. After adjusting the brightness in a third-party app, the brightness control permission is obtained by the third-party app, so the brightness does not change with the ambient light.

Please restart your phone and try to recover.

Please back up your important data, try it after factory resetting your phone.

If the problem persists, there may be a problem with the ambient light sensor of your phone, so you are advised to back up important data in advance and bring the purchase receipt to the Huawei Customer Service Center for testing.

After the auto-dimming button disappears, install the input method, and it can be restored after restarting the phone.

The automatic brightness adjustment of the Huawei screen is gone.

Hello, I have seen your question, I am sorting out the answer, and I will reply to you in about 5 minutes, please be patient

I hope I found it helpful to you, and if you have any other questions, you can continue to ask me questions, and I will be happy to answer them

There is no auto-adjustment or auto-adjustment, I haven't found it.

You open your phone's settings to find the screen brightness.

Either your phone doesn't have this feature, and if it does, it doesn't show up. It is recommended to back up your data and restore your phone.

Originally, there were, I used it for more than a year, and suddenly it was gone.

That could be a system bug, you can see if you can update the system, and if you can't update, restore the settings.

Take the Huawei Mate10Pro EMUI 9 system as an example.

How to set the screen of Huawei Mate10Pro to be always on? After the screen is always on, our phone will not automatically lock the screen, only when we want to lock the screen, press the power button to lock the screen, I bring you the setting method.

1、Find and click to open [Settings] on the desktop of Huawei Mate10Pro mobile phone,2、Click to enter [Display] under the settings menu,3、After entering the display menu,Click to open [Hibernation] to select Hu answers,4、Click to check [Never] in the pop-up option box to set the screen to be always on, and check other times to turn off the wild screen at the specified time.

This article uses Huawei Mate10Pro as an example for EMUI 9 system.

When we use the screen to watch TV or play games, the screen brightness is too high to cause eye fatigue, so we can turn down the brightness. So how do you adjust the brightness of Huawei MatePad 11?

1. Control center adjustment: Swipe down from the right side of the screen to open the control center, and slide the brightness bar to adjust the brightness.

2. Adjust in settings: Move the brightness bar in the display and brightness settings to adjust the brightness, or you can turn on [Auto Adjustment].

This article uses HUAWEI MatePad 11 as an example for Harmony system.

The HUAWEI Mate 10 can set the screen to stay on.

1. Turn on your phone, find the settings option on the home screen of your phone, and tap to enter.

2. Click to enter the settings interface, find the item that shows the draft size, and click to enter.

3. After clicking to enter the display interface, find the hibernation option and click to enter.

4. Find the Never option in the pop-up interface, and click on the bridge Jingheng option to do it minmin.

Check whether the e-book mode is turned on, if you accidentally open it as instructed, you can turn off the "Electric Jianqing Zishu Mode" in the drop-down shortcut button in the notification bar, or turn it off in Settings-Display and Brightness-E-book mode.

Correct, thanks.

Summary. If your Huawei Mate10 brightness can only be adjusted to the lowest and highest, here are a few things you can try:1

Make sure you are using the latest version of Huawei EMUI operating system, if not, try updating to the latest version. 2.Try restarting your phone, sometimes restarting can fix some issues.

3.Clear the screen protector or operating system cache, which can sometimes cause the screen brightness to not adjust properly. 4.

Try to go into the settings option of Huawei Mate10, find the screen brightness option, check if it is disabled, if it is enabled. You can also try turning the brightness auto-adjust off and then adjusting the brightness manually. If none of the above methods solve the problem, we recommend that you contact Huawei customer service.

If your Huawei Mate10 brightness can only be adjusted to the lowest and highest, you can try the following methods:1Make sure you're using the latest version of Huawei's EMUI operating system, if not, try updating to the latest version.

2.Try restarting your phone, sometimes restarting can fix some issues. 3.

Clear the screen protector or operating system cache, which can sometimes cause the screen brightness to not adjust properly. 4.Try to go into the settings options of the Huawei Sun Chain Mate10, find the screen brightness option, check if it is disabled, if it is, please enable it.

You can also try turning the brightness auto-adjust off and then adjusting the brightness manually. If none of the above methods solve the problem, we recommend that you contact Huawei customer service.

I'm still a little confused, can you be more detailed?

If your Huawei Mate10 brightness can only be adjusted to the lowest and highest, you can try the following methods:1Make sure you're using the latest version of Huawei's EMUI operating system, if not, try updating to the latest version.

2.Try restarting your phone, sometimes restarting can fix some issues. 3.

Clear the screen protector or operating system cache, which can sometimes cause the screen brightness to not adjust properly. 4.Try to go into the settings options of the Huawei Sun Chain Mate10, find the screen brightness option, check if it is disabled, if it is, please enable it.

You can also try turning the brightness auto-adjust off and then adjusting the brightness manually. If none of the above methods solve the problem, we recommend that you contact Huawei customer service.

Summary. Hello dear, there are roughly two reasons for your situation, one is caused by software system errors, through the setting adjustment is unable to achieve the normal measurement, you can back up the data, and then restore the factory settings to try it, if the brightness can not be adjusted after restoring the factory settings, this means that there is a hardware problem, the backlight of the screen has a problem, in this case you can only replace the screen backlight.

Huawei's brightness is turned on to 100% and only 20% brightness, and the automatic adjustment is also turned off. Still useless.

Hello, very honored with your Zhishu question, the answer is being sorted out in the sedan chair, please wait. Hello dear, there are roughly two reasons for your grip on the paulownia, one is caused by the error of the software system, it is impossible to achieve the normal measure by setting up pure local adjustment, you can back up the data, and then restore the factory settings to try it, if the brightness can not be adjusted after restoring the factory settings, this means that it is a hardware problem, the backlight of the screen has a problem, which can only replace the screen backlight.

If you go to Huawei's after-sales service, he will need you to replace the entire screen, which is more expensive, if you are in a mobile phone repair shop outside, it should be between 150 and 300 yuan.