The sewing machine is 26m8m on the edging barrel

Fix the hemming device to the sewing machine first, and then tuck the hemming strip into the hemming device so that it can be used directly.

Special double-pack puller, bundled strip cloth, overlock seam,

The manual will teach you how to use it.

There is a special hemming device, and the size is according to the width of the hemming strip.

There should be special tools, such as making one piece at home, you can use the sewing method twice.

Remove the needle board, the edging device comes with the needle board, the purchase of the edging device should be based on the width of the edging, consult the seller, he will help you answer.

When doing handiwork, there is always a time to wrap the cloth edge, in doing small Dongdong edging can be slowly sewn by hand, when doing big Dongdong, I like to wrap the edging device bag, this is fast, save time. The edges of the hemmer are topstitched (the stitches can be seen). There may be mm who don't like it, but I think it looks good as long as it's neat or not, whether it's bright stitches or dark stitches.

1.What the edging device looks like.

2.When the edging device is to be used, it should be installed on the sewing machine, and the installation method should be seen in the picture, and the original semicircular panel on the machine should be folded first.

3.And fold off the original cloth feeding teeth and presser feet together.

4.Attach the feeding teeth and presser feet of the edging device to the sewing machine. Then attach the hemming device (the edging device has a semi-circular panel on the body and attaches it to the sewing machine).

5.Thread the hemming strip into the "triangle" guide slot of the hemming.

6.There is a long hole in the guide groove that can be used with a vertebrae or a thin skewer to help the edging cloth pass completely through the guide groove.

7.Thread well.

8.After the edging is removed, the back of the edging cloth strip is placed in the "five hairpin bends" of the edging device.

9.After passing through the guide groove, the front of the edging strip should be adjusted.

10.The edge of the cloth to be wrapped is sandwiched in the middle of this neat edging cloth strip, and pressed under the presser foot of the hungry section, at this time, the adjustment wrench can be pulled to adjust the distance between the "triangle groove" and the presser foot, and the distance between the stitch of the sewing locomotive and the edge of the edging can be controlled.

11.After the adjustment, you can start sewing.

12.After sewing, cut the edging cloth.

13.Finishing the finished product, like to iron it. Hope.

This is made by an ordinary sewing machine, ordinary sewing machines can't do it, and electric sewing machines can have a sewing function.

The three-wire or four-line seam machine can lock out such a side, that is, use the seam machine, and there are more than 200 or 300 small ones for family use.

This is the stitch of the three-wire sewing machine, we have 737 for sale, you can ask me if you need it.

If you want to know why you have to know how the sewing machine works, you can look for it on the Internet and analyze the working principle by yourself, and the analysis diagram will be clear at a glance.

This is a bit difficult for you, your edging device should be a needle board, teeth, presser foot set, right, remove these things, look at the height of the teeth, front and back, presser foot left and right, and the most important thing is to adjust the pull cylinder, change it and adjust it slowly.

First of all, remove the presser foot, needle board, and teeth, and then install the needle board, teeth, and presser foot according to the original appearance.

A sewing machine is a machine that uses one or more sewing threads to form one or more stitches on the sewing material, so that one or more layers of sewing material are interwoven or sewn together. The sewing machine can sew cotton, linen, silk, wool, man-made fibers and other fabrics and leather, plastic, paper and other products, the sewing stitches are neat and beautiful, flat and firm, fast sewing speed, easy to use.

One minute in advance, that is, when the needle is at the corner, it is good to bend the presser foot, and it cannot be locked.

What should I do if I sew a 90-degree angle with an edging device and run out of line.

Sewing machine vintage hemming device hemming looks good.

Hemming, locking hem to prevent the cloth from falling off.

What is this situation, what does it mean?