How do you open the back cover of an oppo phone? How do I insert a card?

How much does a truck cost? on that card.

The tools needed to remove the back cover of the OPPO are: plum screwdriver, suction cup, thin warp (card), card needle (included with the phone).

The steps to open the OPPO back cover are as follows:

<>4. The back cover of OPPO is fixed by screws and buckles, and after removing the fixing screws in the third step, you need to disassemble the machine from the screen with the help of suction cups and warpers. The specific operation method is to use a suction cup to suck up a corner of the screen, suck a slit hard, and at the same time, with the help of a warped piece, separate the screen, as shown in the figure.

Note: The OPPO screen assembly and the back cover are tightly fastened, and it is more difficult to disassemble, when opening the back cover, do not use brute force, so as not to damage the screen and deform the back cover.

OPPO R11The method of opening the back cover is introduced here,In general, the difficulty is not too big,You only need to prepare the screw belt、Suction cup、can be used,And generally opening the back cover will not make the phone lose its warranty service。 Of course, there are also certain risks in disassembly, especially for those who are more difficult to separate the screen and have poor hands-on ability, it is not recommended to open the back cover by yourself.

Tool Material: Take the OPPO Find X2 Pro mobile phone and card pin as an example.

1. First, insert the card pin into the mobile phone card slot of the OPPO Find X2 Pro mobile phone.

2. Go ahead and unplug the OPPO Find X2 Pro's SIM card slot from the OPPO Find X2 Pro.

3. Then push up the OPPO Find X2 Pro's SIM card slot buckle to push the SIM card out.

4. Finally, take out the phone card from the phone card slot button of the OPPO Find X2 Pro mobile phone.

The following mobile phone SIM cards are organized for you.

Installation method:

1. Before installing the SIM card of the mobile phone, you need to turn off the mobile phone.

2. The SIM card tray is generally located at the bottom of the mobile phone or on the left and right sides, it is recommended that you use the mobile phone with its own card pin, insert the card tray hole vertically, and poke out the card tray slightly to remove it.

3. After removing the card tray, you can put in the SIM card (or SD card) according to the card slot type, after confirming that the SIM card is installed correctly, insert the mobile phone and turn on the phone to check whether the mobile phone reads the card normally.

If the size of your SIM card is not suitable for the card punch wheel holder, it is recommended that you go to the nearest OPPO customer service center or operator outlet (Mobile, China Telecom, China Unicom) to crop it.

1. Before installing the SIM card of the mobile phone, you need to turn off the mobile phone.

2. The SIM card tray is generally located at the bottom or left and right sides of the mobile phone, it is recommended that you use the mobile phone's own card pin, insert the card tray hole vertically, and poke out the card tray slightly hard to remove it.

3. After removing the card tray, you can put in the SIM card (or SD card) according to the card slot type, after confirming that the SIM card is installed correctly, insert the mobile phone and turn on the phone to check whether the mobile phone reads the card normally.

If the size of your SIM card does not fit the tray, it is recommended that you go to the nearest OPPO official service center or operator network (Mobile, China Telecom, China Unicom) to crop it.