What is the difference between a prototype and an original notebook?

Original machine: new machine, no unpacked;

Prototype: also known as "display machine", it is used to show or experience customers in physical stores.

The prototype has the following characteristics:

1. It is generally a new machine, but the packaging is unpacked;

2. If the software is used, the hard disk has a relatively new machine and a longer use time;

3. The warranty time is shorter because it has been displayed for a long time.

Generally, computer prototypes will also be sold at a low price when the inventory is insufficient, and it will not affect the use, and it is no different from a new computer. However, some unofficial and unofficially authorized computer stores will use computers with dark diseases as prototypes for sale.

purchase advice; 1. Buy at a regular physical store;

2. Ask for invoices and other vouchers for after-sales warranty.

Prototype,It's a machine that is placed on the counter as a sample.,Generally speaking, it's often used to use ah.,Whatever.,There will definitely be a lot of loss.。。。 The new machine is placed in the warehouse, what, it has not been used since leaving the factory, the box and other packaging are all intact, generally speaking, the prototype is much cheaper, but it is better to buy a new machine.

The prototype of the notebook may be damaged internally because it has been put for a long time, and the original machine has not been used after leaving the factory or is still new.

As explained downstairs, the younger brother makes a small addition: no matter what kind of notebook it is, with the same model of hardware, the performance of the notebook is worse than that of a desktop.

The prototype is the notebook you see in the store, and the system has been installed for you to experience.

The original machine is the machine that is stored in the warehouse without being opened.

Differences: 1. The prototype has seen the light, has been touched, and has been played. There are good points with a protective film, and there is dust on the market without a protective film.

2. The original machine is not opened, and the genuine system that comes with this machine is also not expanded. 3. The prototype and the original machine may not be the same batch of factories. 4. The hardware use time of the prototype and the original machine is different.

The others are no different. But in the case of computers, there are very few hardware problems, and they are generally software problems.

Prototype*** But not for sale.

The notebook prototype is a computer that is displayed every day in the store, so that people can experience the operation.

When many consumers buy a machine in the mall, they will first use the prototype to operate the experience, and if the time is too long, the prototype will appear slightly worn.

When purchasing, please carefully check the prototype box, if the box is too worn, and the salesperson prevaricates on the grounds of transportation, the computer is likely to be a long-term unsalable machine, the way to identify the unsalable machine is to check the production date of the computer. The date of manufacture is written on the side of the computer box, and the specific time and place of origin are written. Generally, the replacement of computers is a cycle of 3 months.

Please be careful not to buy the machine for more than 3 months.

HD-Tune, hard drive testing software, can check the usage time of the hard drive. Prototypes typically reach more than 100 hours, or even 200 hours. Dozens of hours are normal under normal circumstances.

In addition, if the book you selected is just on the market or is still on sale, the possibility of the prototype is relatively small, if it is about to be discontinued, it is not excluded that the merchant will sell the prototype in clearance.

In the past, you can also check whether the box is encapsulated, but now the merchant is also very fine, one is to unpack from the bottom, so that the sealing belt can not see the problem, and the other is to use a hair dryer to unpack the box belt, so that they only need to be careful, and they can not see the traces of unpacking. However, in order to prevent the prototype from being stolen, the anti-theft locks of the notebook are used, which may leave scratches.

Hello, a prototype is a machine used to display at the counter, and the quality of this kind of machine lies in the time it is displayed.

Under normal circumstances, the quality of the machine that can be used as a sample machine is selected, that is, the hardware is better, and if it is not displayed at the counter for a long time, it can definitely be bought, and the quality is better. If the display time is more than 3 months, you should carefully test whether the appearance of the machine is complete and whether the reaction speed is normal. Make a selection.

The configuration you just mentioned is quite good, if from the time you buy it, the warranty time is still according to the specified time, you can consider buying it.

My machine is a sample machine, Shenzhou Jingdun's, it has been used for two years, and the quality is still good.

I hope it can help you, and if you have any questions, please feel free to continue to ask.

It's on display at the counter. The machine is okIt's the kind where thousands of people touch and thousands of people watch. As long as it hasn't been repaired, it's still reassuring. Depreciation is new.

The prototype is for display, and some are only displayed, and no one touches it, so it is better; Some of them can be tried by people, and there may be more problems.

1. Flexibility is different.

The parts of the original machine are already fixed, and there is little room for selection, so there is little flexibility. In this regard, the assembly machine has a great advantage, and can flexibly configure its own computer according to its own needs.

Second, ** is different.

In the case of exactly the same configuration, the ** of the brand computer is more expensive than the assembly machine. This is because the assembly of the original machine is strictly tested by the technical department, and the technical service fee must be counted here, in addition to the after-sales service cost implied by the brand machine, etc. The assembly machine is completely the sum of the best parts together.

Third, the after-sales service is different.

The after-sales service of the original machine is relatively better. The warranty period of the original machine is longer than that of the assembled machine, in addition, the brand store can carry out simple repairs, and there will be special repair outlets in large and medium-sized cities. If the assembly machine is broken, it needs to be sent to the manufacturer for repair, which takes a long time, and of course the parts are not so easy to break.

Fourth, the annexes are different.

Generally, the assembly machine only sends mouse pads, dust covers, power strips and so on. In addition to these, the original machine will generally come with genuine antivirus software and genuine operating system.

Fifth, different stability aspects.

The original machine has its own independent technical department, which will carry out strict testing and inspection for each component of the original machine, so the compatibility is very good and not easy to fail, which is what we often say is good stability.

The assembly machine is to order different computer parts according to your own needs for assembly, and as far as the current technology is concerned, most of the parts are compatible with each other, which everyone can rest assured. However, there will be some minor problems in the process of using the assembly machine, such as the memory slot is easy to loosen and so on.

Notebook prototype refers to the notebook computer brought by the manufacturer for display, trial and testing, which is commonly known as the manufacturer's public notebook. For consumers, to buy a prototype, you need to pay attention to the following points: First, because the prototype is a computer used by the manufacturer to display and test, its appearance and performance may not be as good as the officially sold products, common problems include the lack of a complete warranty or a short warranty period.

Secondly, since the prototype is only for display or testing, there may be defects that have been repaired or the risk of not being able to be fully tested, so the purchase of the prototype must carefully consider the purpose of its use and the way of purchase.

When it comes to buying a prototype notebook, you need to consider the purpose of use and how you want to buy it. If it is used for display and demonstration, etc., you can get a certain discount by purchasing a prototype and the performance will be enough to use. Because the factory box of the prototype also has complete accessories, it can be fully used in a normal way.

If it is for daily use, it is recommended to buy a product that is officially sold to avoid many problems.

In addition, it is worth noting that the service life of the prototype cannot be determined, and for users with high computer configuration requirements, the purchase of the prototype may not meet the needs, and there may also be greater potential safety hazards.

On the whole, buying a notebook prototype is not a good choice, and it is recommended that users still choose products that are officially sold. If users need to buy prototypes, they need to go to the most reliable channels to buy them, and understand the relevant risks and precautions in advance, and make adequate backup plans. <>