Can I choose a chassis for assembling a computer?

It is not possible to choose a case for assembling a computer.

B75 large board, with BenQ display and chassis, power supply needs to be selected according to the owner's use situation. The power consumption of ordinary computers at home can be more than 200W; The configuration of the game is normal, and the power supply above 400W can be selected;

When buying a case, you need to consider various parameters such as the size of the motherboard, the size of the heatsink, the gap between the internal hardware sockets, etc.

Extended Materials. Players choose different standards and models of chassis due to the different platforms they build up to buy the chassis. No case is a panacea and suitable for various needs, so when buying a case, players should start from their own needs and choose the right case to meet the installation needs.

In the DIY field, in fact, players choose different standards and models of cases due to the different platforms they build when they buy cases. Therefore, when purchasing and assembling a PC, it is important to consider the compatibility between the various hardware.

7 different models of high-quality chassis are recommended.

Of course, the chassis of the assembly machine can be chosen at will. However, it is recommended to choose a standard ATX case. There is a special HDPC case that you should not choose, because the standard power supply of that kind of chassis cannot be placed.

What is the specific model of your 1G graphics card? The choice of power supply depends on your overall power consumption. If you choose a larger case, it looks good and is good for heat dissipation.

It is best to choose the chassis according to the size of your motherboard, and there is also the question of how many parts can be added to the interior in the future.

Don't want a chassis can also be, this kind of practice to the wall I have also seen in the computer city, but it is not good-looking occupies a large area of dust on the motherboard, and the screwdriver is too bold to boot it, and the tentacles of the socket will be damaged by poking the socket for a long time, and it is easy to burn the motherboard by mistake, the gain outweighs the loss, it is recommended to install a chassis, the role of the chassis can standardize the internal hardware of the chassis, dustproof The thick steel plate of the chassis wall can block 80% of the radiation Health and environmental protection. But there are also advantages to not having a chassis, first of all, it has good heat dissipation and saves money.

Theoretically, this can be done

If you're not afraid of dust, or drink water or something, spill it on it

In addition, don't hang on the wall, even if you put it on the table or on the ground, it takes up a lot of space, it is recommended that you still spend money on it, one or two hundred

This is a real bare metal... Boss, generally speaking, using a screwdriver to turn on the machine is often operated by maintenance personnel on the motherboard, in case you are confused and in the wrong place, you still have to spend money to buy the motherboard Also, not to mention the dust content in the air for the time being. The motherboard is made of precision electronics, and if you stick it a little conductively (even if you sneeze), you have to buy the motherboard, and there is the problem of oxidation of the parts

。。。You don't want the chassis to estimate that your motherboard is full of dust for 1 month, and the heat dissipation is good, but the machine must be scrapped quickly, and sometimes there is a little water in the air, which accelerates corrosion. The main purpose of the chassis is to protect the electronic components.

What do people do when they wear clothes, the chassis can be used, my computer host is in a drawer, and the monitor is not covered by the wall.

With the chassis, dustproof. Waterproof, that's the bare minimum. In addition, how much money was spent, the difference of one or two hundred yuan?

You can do without the chassis The advantage is that the heat dissipation is good, and the disadvantages are good. It's not beautiful, in case a glass of water is poured there...

The chassis is beautiful The cooling machine is a little more expensive, so it is not recommended to hang it on the wall.

Yes. It's the same as drying your clothes.

You don't need to hang it on a hanger and put it on the ground to dry, but it may be dirty and dry slowly.

Hope you understand.

This really can't be without a chassis.,Do you think?,If Xiaoqiang takes a fancy to your motherboard or your graphics card as a nest, how terrifying it is.,If you want to replace it with a spider or something, wouldn't it be like the end is coming?

If you have an old chassis, a new one is a must. Hard drives need a stable working environment. Besides, it's not good-looking, and it's easy to break.

This is not very good, because, you know that the installed computer is easy to cause damage in the outside world, and the landlord replaces it with something else, which is not too good, and it is better to use the chassis.

Absolutely, as long as you are not afraid of the computer getting into the dust and vibrating in the water.

The first time I heard someone say that the case should be hung on the wall for easy assembly, you can hang it yourself and try it.

Wouldn't it be strange if you didn't want a case.,And the hardware inside also needs a shell to protect it.,I also assembled one myself before.,Go to Tao.。 Bao bought one, both the appearance and performance are very good, you can go to Tao, treasure search"Solid color explosive desktop case"

The box is a fixed one, if you don't need the box, then hang it on the wall Do you think it's safe, the outside of the box looks good, the other point, someone from the house, put it outside for you to break it, what to do!

1: Dustproof.

2: Radiation protection.

3: Anti-electromagnetic interference.

4: Protect the motherboard.

5: Form an air duct, and running naked may not be good for heat dissipation.

If you don't want a chassis, you can just buy the hardware, and there should be a whole set on the market.

It's totally possible, but it's just a large area and irregular.

No, the chassis is meant to protect the hardware, absolutely not.

Yes, you can use it with or without a chassis, but it's not beautiful, and there's a lot of dust.

The chassis has the role of loop radiation and carrier board.