How do I set my computer to be automatically connected to the Internet?

1.If you use a broadband router.

If you're using a broadband router, it usually offers the option to connect automatically. Just set up the connection first, including information such as password and password or IP address, to ensure that you can surf the Internet. Then select the connection method as "Auto Connect" to ensure that the router can automatically surf the Internet as soon as it is powered on.

Tips. The settings are different for each router, but they generally offer an auto-connect feature, so just check the appropriate instruction manual or ask someone who is a computer competitor to do the trick. This is also one of the most convenient ways to access the Internet automatically.

2.If you use dial-up or adsl

If you are using dial-up or ADSL Internet access, you can double-click the connection after the connection is established, click the "Properties" button in the open window, click the "Options" tab in the open window, and then uncheck the "Show connection progress when connecting" and "Prompt name, password and certificate, etc." checkbox, then change the "Replay Count" to a maximum of 99 times, then select the "Redial Interval" drop-down menu to change to 1 second, and finally check the "Disconnection Redial" checkbox, and the other options remain the default settings.

Next, select the adsl connection in "Network Connections", right-click, select the "Create Shortcut" command, and create a shortcut "Shortcut ADSL" on the desktop to point to it.

Next, open the "Control Panel", double-click the "Task Schedule" icon, then drag and drop the "Shortcut ADSL" on the desktop into it, then double-click the "Shortcut ADSL" item in the "Task Schedule" window, click the "Schedule" tab in the open window, click the "Schedule Task" drop-down list box, select "When the system starts", and then enter the user password (usually for the system administrator) in the open window.

1. First confirm whether the wireless router is configured correctly and whether the WAN port has obtained the IP;

3. If you can dial up the cat directly, only the router can't dial. Generally, it is a router hardware failure;

4. If you can access the Internet, you can't access it suddenly. It is related to the router cache, you can dial the power cable behind the router and replug it, and wait until the signal indicator lights up again, and then try to connect.

Take Windows 10 system computer as an example, the computer can be set up to automatically network as follows:

1. Find the network icon in the bottom right corner of your computer's desktop and click Open Settings.

2. Select the Wi-Fi you want to connect to, and then click the auto-connect option below the name of the Wi-Fi you want to connect.

3. After entering the network security key, click Next to wait for the connection, and the network will be automatically connected when the computer is used again.

1. Find the network icon in the lower right corner of the computer desktop and click to open the setting.

2. Select a wireless LAN to be connected, click the automatic connection option below the wireless network name, and then connect.

3. Enter the network security key and click Next to wait for the connection, and the network will be automatically connected when you use the computer again.

1. If the computer uses WLAN or a wired or wireless router to connect to the computer, it will be automatically connected to the Internet after turning on.

Enter the address you see on the router in the browser, generally the specific address is subject to the address on the back of the router) and then enter, enter the corresponding account and password admin

After entering the operation interface, you will see a setup wizard on the left, and you will enter the setup wizard interface.

Click Next, and if dialing, use PPPoE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

As I dial up, I choose PPPoE.

If you choose PPPoE dial-up Internet access, you need to fill in the Internet account and password, so that you don't need to dial up every time you go online after setting; Connect to a wireless router A broadband router will automatically access the Internet.

2. If you use a broadband connection, you need to set it up.

1.Open the Control Panel from the Start menu and click on "Internet Properties".

2.Select the "Connect" option. Select the dial-up connection you want to use as the default.

3.In the settings, select Dial regardless of network connection.

Hello, the computer does not have this function, you need to use the router, the router has this scheduled networking function setting.

Set your username and password first, and select "Remember Password".

Then remove the checkmark in front of "Show username and password" in the properties of the dial-up connection, so that once it runs, you can dial directly without clicking "Connection", and finally make a shortcut to the dial-up connection and put it in the start menu startup item.

1. If your network is connected to the modem, and then the router comes in, then go into the router and set it to automatic connection.

2. If it is directly connected to the cat, then in your ADSL connection**, set it to automatic connection.

Any questions, reply to me.

If there is an auto-dialing option when setting up a broadband connection and entering the account and password, just tick it.

Method steps.

1. First click on the start icon in the bottom left corner of the computer, and then click on "Control Panel".

2. Click "Network & Internet" in the settings window of the control panel that opens.

3. Then click on "Network and Sharing Center".

4. Click "Change Adapter Settings" in the Network and Sharing Center Settings window.

5. Right-click "Broadband Connection" and click "Properties".

6. Click "Options" in the broadband connection attribute setting window, and then remove the 3 checks from the dialing options, and click "OK" after setting.

7. Right-click the computer icon and click "Manage".

8. In the computer management window, we click on "Task Scheduler".

9. Then we click "Create Task" on the right.

10. Fill in the name of a task at random.

11. We click on "Triggers" and then click on "New".

12. Start the task there and select Login, and then in the Advanced there, select 30 seconds for the delay task time.

13. Click "Operation", and then click "New".

14. In the program or script, we enter %windir% system32 ,-d adsl broadband connection, where broadband connection refers to the name of the broadband connection on your own computer This should be set according to everyone's differences.

15. In the pop-up task confirmation window, we click "Yes" and all the operation steps have been completed.

1.Open Settings.

2.Click on "Wi-Fi".

3.Once you're on the interface, tap on the small triangle next to the wifi you want to set to connect automatically.

4.After entering the network details of the wifi, turn on "Auto Connect".

5.Finally, click the OK button at the top right, and the phone will automatically connect to the wifi when it is in the network coverage range.

Step 1: Make sure that our broadband account and password are saved in the broadband connection, and we can open the broadband connection to view.

Save your account and password:

Step 2: Open the network connection attributes, change the broadband connection attributes, specifically, the online neighbor right-click attribute Broadband connection right-click attribute Select the "Options" bar, remove the default "check" before the first and second options, and OK.

Modify Options:

Step 3: If we want to make the "broadband connection" run automatically when booted, we must add it to the boot startup item, the specific operation is: click "Start" All Programs Place the mouse on the "Startup" and right-click to select "Open", and put the "Broadband Connection" icon on the desktop into the "Startup" folder after opening (place the mouse on the broadband connection, hold down the left mouse button, and drag it directly into the folder).

Drag into the Startup folder.

Step 4: Actually, it is already possible to do the above, but in order to ensure success, we can go to the properties of the online neighbor, cancel the default connection of the broadband connection (right-click on the icon), and then restart it as the default connection, so that the computer will start to connect to the network with the broadband connection by default when it is turned on.

Turn it back on. Step 5: After confirming the above operations, delete the "broadband connection" on the desktop, restart the computer, at this time we no longer need to manually run the broadband connection, and wait for the computer to prompt the connection to be successful.

Method 1: Set up the Internet connection when installing the system.

In the process of installing Windows XP, when setting up the Internet connection, you can enter the user name and password as prompted and set it to automatically connect to broadband when it is turned on, so that it can be automatically connected to broadband every time you turn on the computer after the installation is completed.

Method 2 Add a broadband connection to the startup group.

First, you don't need to prompt for a username, password, or certificate when setting up a connection.

Click "Start" to "All Programs" - Accessories - > Communication - > Network Connection, click "Network Connection" to open the "Network Connection" window (or directly right-click "Network Neighbors" on the desktop and select "Properties"), right-click the "Broadband Connection" icon in the window to open the "Broadband Connection Properties" window, select the "Options" tab, and cancel the tick in front of "Prompt for username, password and certificate". Then click "OK" to close the window. At this time, you can click on the shortcut of the broadband connection on the desktop, and the connection will be automatically carried out, during which only the progress of the connection will be displayed, and you will no longer be prompted for confirmation of the name, user, and certificate.

Second, drag the "Shortcut to Broadband Connection" on your desktop into "Startup".

Method (1) Use the mouse on the desktop to point to the "shortcut to broadband connection", left-click it and don't let go, move the mouse pointer and drag it to the right side of "Start" - All Programs - > Startup - > Startup, when moving to the right side of "Startup", there will be an extra thick black line displayed, then let go of it, you can see that there is an additional shortcut to broadband connection in the "Start" project.

Method (2): Click Start - > All Programs - >Right Click) Start - > Open - > and then drag the shortcut of the broadband connection on the desktop into the startup folder.

I don't know if you want to use the Internet on two computers at the same time? If so, you need to buy a router (you can ask the seller how to install it), so that you can use two computers to surf the Internet at the same time.

If you just want to use only one computer at a time to surf the Internet:

Pull the network cable and create a new "network connection" on it!

How to establish a network connection:

1.On the desktop, "Right-click" - "Online Neighbors", select "Properties" in the menu;

2.In the right column of the network connection window, "Single key" - "Create a new connection";

3.In the New Connection Wizard, select Next

Select "Connect to the Internet" - "Next".

Select "Manually set up my connection" - "Next".

Select "Connect with a broadband connection that requires a username and password" - "Next".

Fill in the "ISP Name" (the ISP name is the name of the connection, any name is acceptable) - "Next".

Fill in your broadband account password and "Next" to complete!

The computer wireless network card is automatically connected to the tutorial, and the system settings turn on or off the automatic connection to the wireless network.

The easiest way is to enter the cat and open the route,Then you can turn on the computer and go online,And the redo system does not need to reenter the username and password,If you don't know, you can add me。

Tap on your broadband connection below.

Remember your password. Then hold the broadband connection with the mouse and pull it into Start-> Program->Startup.

See you automatically next time you turn it on.

This is the easiest, and you can also change the registry...

How to set up the automatic connection at startup: The first step is to pull the shortcut of the broadband connection to the startup (start--all programs--start); Step 2: Start - Control Panel - Network Connection--- Broadband (the name of your broadband connection) - Properties - Options - Remove the checks in front of "Show progress when connecting" and "Prompt name, password and certificate"; This way, your broadband will connect to the Internet as soon as your computer boots up, so you don't have to click "connect" again.

How to set up an automatic broadband connection on your computer:

1. First find the icon of your online neighbor;

2. After finding the icon of the online neighbor, right-click, and then in the drop-down options, select Properties, and a dialog box will pop up;

4. At this time, you will see that below the options, there is a "Show connection progress when connected, prompt name, password and certificate, etc. (P)." At this time, remove the tick in the box in front of these two options, and click the OK button.

5. When setting up, remember that after the computer restarts, do not enter the account and password first, and set up the automatic connection first, so that the automatic connection can take effect.