The watch calendar doesn t go, the newly bought watch calendar doesn t go

Updated on vogue 2024-03-11
9 answers
  1. Anonymous users2024-02-06

    Let's take a look at the manual debugging first:

    1: The innermost upspin is the upper spring, the downspin is neutral, and some of the upper and lower spins are neutral, which completely depends on the rotor to work.

    2: Pull out a gear, the top spin is to adjust the date, and the bottom spin is to adjust the day.

    3: Some are upspin to adjust the date, downspin is neutral, at this time must be clockwise 24 hours to adjust the day of the week, and then adjust the date after the week is adjusted. (The day of the week will be normal after adjustment, because the day of the week is continuous, and the watch must have a dial date because the calendar has the 30th, 31st, and even February has only 28 days).

    5: Day-calendar jumping, due to the different frames, it is divided into two kinds of fast and slow, the first is completed within 5 minutes, and the second is completed within 3 hours.

    6: Avoid stripping the calendar between 9 pm and 4 pm, because the night is the time period when the calendar system is running, and manual adjustment is easy to cause damage to parts.

    7: It is recommended to send it to the brand after-sales service or regular maintenance service center for testing and maintenance.

  2. Anonymous users2024-02-05

    Hello, glad to answer for you!

    The correct way to adjust the date on your watch.

    1. The handle in the middle is screwed like a screw, according to the waterproof design of the counter, and when adjusting the time, it is screwed downwards counterclockwise, and it is loosened like a teacup lid.

    2. After unscrewing, it is screwed directly upwards at 0 gear, and it is manually wound. (If you buy a new watch or have not worn it for a long time, please manually wind it for 30 turns when you wear it again, so as to ensure the energy of the watch, which is usually not needed).

    3. Pull it lightly, it is 1 gear to twist up to adjust the week, and down to adjust the calendar.

    4. When pulling it, it is 2 gears that can adjust the time. (It is not recommended to debug the watch privately, it is recommended to go to the after-sales center for debugging and calibration!) )

  3. Anonymous users2024-02-04

    Summary. Hello, the calendar of the watch may not go because the calendar dial is only set for 30 days, and this month is 31 days, at this time you can pull out the watch handle one gear to adjust. If it still does not jump after adjustment, then it may be that there is a problem with the movement and you need to go to the watch shop to repair it, and be careful not to adjust the watch between 8 pm and 2 am.

    What's going on with the newly bought watch calendar not gone.

    Hello, the calendar of the watch may not go because the calendar dial is only set for 30 days, and this month is 31 days, at this time you can pull out the watch handle one gear to adjust. If it still does not jump after adjustment, then it may be that there is a problem with the movement and you need to go to the watch shop to repair it, and be careful not to adjust the watch between 8 pm and 2 am.

    In the process of adjusting the meter, do not adjust it between 8 p.m. and 2 a.m., which is the time when the gear tooth fit is the lowest. At this time, frequent adjustment of the watch will cause damage to the internal parts and affect the service life of the watch.

    I hope mine can help you and have a great day.

    For the newly bought watch, I adjusted the date three times in three days. I took a look, and some said that the new watch requires the handle to be rotated up 30 times, is that true?

    Hello, in fact, this is not good, the time is often not punctual, it is difficult for you to observe the abnormality of the watch in time, and it will also affect your life and experience.

    There are two grids on the handle of the automatic watch, the first box is to adjust the date, gently pull it out, rotate it upward, you can see that the date is jumping, the adjustment of the date is often only one direction, when you go in the wrong direction, the date will not jump, if you try in both directions, it is still not moving, it may be that your watch handle is not pulled out, or your watch date is broken. The second grid is to adjust the time, gently pull to the second grid on the basis of the first grid, rotate down, at this time you can see the minute hand of the watch is deflecting, here is a reminder to everyone, the second grid of the adjustment time direction should not be wrong, wrong, the hands will run back, which will hurt the mechanical gear of the watch.

    According to the above operations, you can finally adjust the accurate time to reset the watch handle.

    This one of mine is battery-owned.

    Hello, if it still doesn't jump after adjustment, then there may be a problem with the movement and you need to go to the watch shop to repair it.

    I'm glad to answer your questions and have a great day.

  4. Anonymous users2024-02-03

    Summary. Most likely, it was an internal problem with the movement. After all, there are mechanical parts inside the watch, and it is inevitable to encounter various accidents in daily life that cause damage to the watch parts.

    Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

    Hello! The calendar of the watch does not jump because the calendar disk is only set for 30 days, and this month is 31 days. If it still does not jump after adjustment, then it may be that there is a problem with the movement and you need to go to the watch shop to repair it, and be careful not to adjust the watch between 8 pm and 2 am.

    The hand adjustment time is said to be calendar and does not jump.

    Normal walking time is also out of tune. What is the reason?

    Why don't you speak?

    Most likely, it was an internal problem with the movement. After all, there are mechanical parts inside the watch, and it is inevitable to encounter various accidents in daily life that cause damage to the watch parts.

    When adjusting the chain and counting the date of the whole watch, if there is a situation where the watch is twisted for a long time or the code does not move, it may be caused by the crown being screwed upside down, which is also easy to cause damage to the internal gears.

  5. Anonymous users2024-02-02

    There are many reasons why the watch calendar does not jump, here are some possible reasons:1Contact point dust:

    The date of a watch is usually calculated by means of a small mechanical part, and if this part is affected by dust, oil, etc., it may not run properly. 2.Date gear worn:

    The gears and parts in the watch's calendar mechanism may be worn out and deformed after long-term use, resulting in the date not being able to beat. 3.The watch is not functioning properly:

    If the movement of a watch is not functioning properly, for example when it is affected by a strong magnetic field or if the movement needs to be cleaned and maintained, the calendar may not function properly. 4.Spring Break:

    There is a metal piece called spring in the calendar mechanism of the watch, which may be tired and broken after long-term use, causing the calendar to not beat. If the calendar of the watch does not jump, it is recommended that you hand the watch to a professional repairer for inspection and maintenance.

  6. Anonymous users2024-02-01

    It is recommended to go to a professional watch shop for repair, because it is a precision machine, and it cannot be repaired by yourself.

    Mechanical watches can usually be divided into the following two types: hand-wound and self-winding watches. The power of these two machines** is powered by the mainspring in the movement, which drives the gears and then pushes the watch hands, but the power ** is different.

    Hand-wound mechanical watches rely on manual winding for power, and the thickness of the movement is thinner than that of ordinary self-winding watches, so the weight of the watch is relatively light. A self-winding watch uses the automatic rotating disc of the movement to oscillate left and right to generate power to drive the mainspring, but the thickness of a hand-wound watch is relatively smaller than that of an automatic winding watch.

    The purchase of mechanical watches should pay attention to the following points:

    1 Appearance. Visual inspection of the shell, surface, needle, no "trachoma", scratches, bright plating, no color difference, the back cover screwing should be tight.

    2 Starting performance. Slowly rotate the upper stem and watch the second hand at the same time, and generally the fewer the number of rotations of the upper bar that makes the second hand start, the better the starting performance of the watch.

    3 Above. The hand sensing is easy when loading the strip, and there is no noise. Except for the slippage phenomenon after the upper bar of the automatic watch is on the foot, the mainspring of the general watch should be able to be on the foot without slipping.

    4 dial pins. The hand is comfortable when dialing the needle, and it is not good if it is too tight or too loose. The hour and minute hands should be coordinated (when the hour hand is aligned with the characters, the buried roller needle shall not deviate from the 12 characters and 4 minutes), and the hour, minute and second hands do not touch each other.

    5 Voices. After the watch is fully wound, listen to the sound with your ears, which should be clear and symmetrical without noise, and do not change with the change of direction.

    6 Accuracy. It needs to be measured with special instruments, and some large state-owned stores have testing services for customers, and salespeople can be asked to test the accuracy and position error when purchasing.

    Maintenance requirements:1It is especially important to remind everyone that any watch should not be worn in warm water or in the bathroom, even if your watch is a waterproof watch, because the sealing roll rubber of the watch is easy to age when heated, and the surrounding water vapor molecules are relatively small, which can easily penetrate into the case and cause damage to the internal machinery.

    2.If there is any abnormality in the watch, it should be sent to a specialized watch shop for inspection immediately.

    3.The automatic watch must be worn for more than 10 hours a day when the amount of activity is sufficient, i.e. it must be worn for more than 10 hours a day in order to function properly.

    4.Different watches should be worn on different occasions, such as sports watches with excellent waterproof and shock resistance.

    5.If the watch has a Water Resistant or 3ATM label on the case cover, it is generally only suitable for splashing or light rain without pressure.

    6.Due to the different internal mechanical structure of each type of watch, under normal use, the error of mechanical watches or mechanical automatic watches is within 30 seconds per day (this standard is promulgated by national ministries and commissions), while the error of quartz watches is lower and more accurate.

    7.It is best to place desiccant in the place where the watch is placed, but avoid using chemicals such as mothballs and insect repellents.

    8.Leather watches should be kept out of contact with water as much as possible to avoid the strap becoming stiff and smelly, which could lead to breakage.

  7. Anonymous users2024-01-31

    The reason why the date of the quartz watch does not go: most of the reasons are caused by circuit failure, gear train failure, most of them are dust and foreign matter between the gear teeth, so that the gear train teeth are stuck with each other, and some of the tables are too much or very little oil, and they should be re-oiled; If the watch battery is dead or the current capacity is insufficient, and you need to replace it with a new battery, or if it is affected by the magnetic field, you only need to take the quartz watch away from the magnetic field to demagnetize. Reasons why the date of the mechanical watch does not go:

    When the watch is bumped or dropped, it is easy to cause damage to the watch movement, resulting in damage to the calendar system, and it should be sent to the repair shop for treatment. It may also be caused by insufficient power, if you do not wear it or exercise enough, it will lead to insufficient power of the watch, and when you sleep at night, you will take off the watch, and then the lack of power of the watch will be manifested.

  8. Anonymous users2024-01-30

    If you want to repair and maintain the watch, replace the watch accessories, or have any problems with the watch, you can click to consult

  9. Anonymous users2024-01-29

    Hello kiss, I'm glad to be able to answer for you, there are many reasons why the kiss calendar does not go, including the following two kinds: 1. Mechanical watch, it needs to shake, and people can only walk with kinetic energy when wearing it, so it may be caused by your love watch not wearing it for a long time, at this time, not only the finch talk is only the calendar does not go, but the entire Longines watch does not go. Therefore, Longines manipulators recommend that consumers wear more.

    2. Or it may be an internal problem of the movement. After all, there are mechanical parts inside the watch, and it is inevitable to encounter various accidents in daily life and cause damage to the watch parts. Mechanical watches usually have a fast-jumping calendar, so it doesn't matter if you don't lose the wind.

    In addition, if you wind it in reverse, it will cause damage to many internal parts such as the calendar dial. Finally, avoid adjusting the calendar between 9 p.m. and 4 a.m., because the evening is the time when the calendar system is running, so manual adjustment can easily cause damage to the parts. Hope mine is helpful to you!

    Don't forget to give it a thumbs up! I wish you a happy life, peace and joy! <>

Related questions
13 answers2024-03-11

1.The power of the table is insufficient.

An automatic watch only needs to be wound by moving your arm, but if you don't exercise much, or if you don't wear your watch for too long, the watch may not be able to run out of time or stop due to lack of power. Of course, you don't have to throw your arms as a hula hoop in order to wind your watch, just move normally. >>>More

21 answers2024-03-11

Five common reasons for watch time error and watch time inaccuracy: >>>More

3 answers2024-03-11

I just finished doing the overtime for my deceased sister and dreamed that she came back to see me during my lunch break, how can I explain this?

1 answers2024-03-11

With a stable foundation, a wide range of financial resources, and the benefits of his father and ancestors and the promotion of his superiors, it is easy to get unexpected help, and he can achieve great success, great development, and a bumper harvest of fame and fortune. Authoritarianism, fame, and status are all prosperous and magnanimous. 【Dajichang】 >>>More

2 answers2024-03-11

When we have no way out, perusing the Zhuangzi, there will always be new discoveries and new experiences. >>>More