How to use Loctite 277, what are the functions of Loctite 277 glue?

Use Broadviscosity GN755 cleaner to clean the thread surface and allow to dry.

Glue at the meshing of the threads, and the width of the glue is 3-5 threads.

Tighten the thread in the normal way until it is in the correct position, and after 24 hours it reaches its maximum strength.

Storage conditions: This product should be stored in a dry, cool and ventilated place.

To avoid contamination of unused adhesives, pour poured adhesives back into the original packaging container.

Keep away from children.

Curing Properties: Broad Tack 277 threadlocker is a 100 reactive anaerobic compound, a one-component liquid threadlocker that can completely fill tiny spaces between adjacent threads.

Crack. The thread is in contact with the bolt and solidifies into a tough solid after being isolated from the air to stop the thread from moving. Excess glue will not solidify and can be wiped with a cloth.

Fall. When the temperature is very low or the gap is large, the curing speed of GN277 is slowed down, and the accelerator GN7649 can be considered to speed up the curing speed.

Loctite 277 Threadlocker Red Label High Strength Type, can permanently fix and seal the thread lock, after curing, it can isolate the air between the metal parts after curing, prevent relaxation and leakage during vibration, suitable for permanent construction (such as pins), and strength Fasteners below M36 can prevent rust and corrosion of screws, and tools are needed for disassembly with heating tools, suitable for permanent locking and sealing of screws below M36.

Loctite 277 Glue Brief:

Loctite 277 adhesive is suitable for long-term locking and sealing of threaded fasteners, which cures between metal seal surfaces that lack oxygen to prevent loosening or leakage of threaded fasteners caused by shock or impact, mainly in large bolts.

m25 and larger).

Loctite 277 Glue is a threadlocker with high strength, high viscosity and excellent chemical resistance. It is used for locking and sealing threads up to M36. It can prevent rust and corrosion of threads, and can be disassembled with heating and tools.

Product parameters: brand: Loctite Model: 277

Packing: 50ml 250ml Color: Red.

Viscosity (: 6000 8000 Average disassembly moment (: 32

Specific gravity: Temperature range ( ) 54 150

Loctite 277 is a red, high-strength threadlocker for locking and sealing large bolts and studs. High strength bolt size: greater than m20 working temperature: 150oC with oil capacity suitable for all metal substrates high viscosity.

High strength bolt size: greater than m20 Working temperature: 150 It has oil capacity and is suitable for all metal substrates with high viscosity.