Audi A6L does not have an oil dipstick how to look at the oil

Before July 2012, the Audi A6L had an oil dipstick, you open the engine cover and pull out the oil dipstick to see it, and after July, you can use an electronic dipstick, press CAR in the MMI, and you can view it in the car settings.

Whether to burn engine oil I think to look at the fuel consumption can also be, I generally use the imported GT Magic Red or Jin Mobil, fuel consumption is around, friends A6L also have, generally this is normal.

1. Find the location of the dipstick. The oil dipstick is all on the side of the engine group delay burial machine, some at the top, some on the side, and the ruler has a very obvious feature, that is, there is a pull ring.

2. Pull out the oil gauge. Note that to check the oil level, oil must be used when the vehicle is cool, and you won't be able to see it if you're just driving backwards or if the engine is running.

3. Clean up oil stains. After removing the ruler for the first time, wipe it clean with a clean paper towel and insert it.

4. When you pull out the dipstick for the second time, you can see the amount of oil on the ruler.

5. If the oil is between the upper and lower limits, the oil volume is normal. The so-called upper and lower limits are usually scaled proportionally and can be seen by the Clearing Ground Ruler.

This model does not have an oil dipstick, so you need to check the oil level information through the ** display.

Start the car after adding oil, turn off the engine for 3 minutes after the hunger is lost. Because the oil filter needs to be changed at the same time as the oil is changed, there is no oil inside the new oil filter, and the oil will flow into the oil filter after starting the vehicle. Turn off the engine for 3 minutes so that the oil can flow into the oil pan.

It would be more standard to look at the oil this way. Remember not to check the oil level on the ramp, because the car is tilted, and the oil is also inclined in the oil pan, so the oil amount checked is not standard.

Adding too much oil will affect the normal operation of the crankshaft. It will also lead to an increase in the fuel consumption of the vehicle.

If there is less oil, it will not be used for circulating lubrication, which will lead to accelerated wear and tear of internal parts of the engine and damage to the engine.

So the oil must be within the specified range.

The Audi A6L uses an electronic fuel gauge that allows you to check the oil level through the in-car MMI display. Click the CAR button to select the car system, and select the maintenance interface on the far right to view the electronic oil dipstick.

After the engine reaches the normal working temperature and idles for a period of time, turn off the engine, reconnect the power to the ON gear, and wait for two minutes to display the oil level. The use of the electronic fuel gauge makes it easy for the owner to check the oil level without getting his hands dirty. There are pros and cons to the use of an electronic fuel gauge.

It is convenient for the owner to check the oil level. At least use the dipstick to see that it is definitely accurate. For experienced car owners, an oil dipstick will be more popular than an electronic fuel gauge.

Because through the dipstick, you can see not only the level of the oil, but also the quality of the oil, so as to determine the condition of the internal parts of the engine and whether the oil needs to be changed.

Press the car button, then select the car system, select the maintenance interface on the far right, then select the oil level, and wait for 2 minutes to display.

The new Audi A6 does not have a dipstick, and the oil can be checked with an electronic dipstick. The electronic fuel gauge is used to check the fuel level through the MMI display in the car.

How to check engine oil with an electronic oil gauge:

1.Press CAR on the shift panel.

2.The English menu will pop up on the big screen.

3.Press the multi-function blank key at the bottom left, and the Chinese menu will pop up on the screen.

4.Use the multi-function rotary button to rotate to maintenance and inspection, and then press the rotary button to confirm. The menu option will pop up.

5.The catalog option rotates directly to the oil level, press the rotate button to proceed to the next step.

6.At this point, the interface will pop up the oil level. After about 2 minutes, the engine should be warmed up and turned off will be displayed.

7.Start the engine for 2 minutes, warm it up, then turn it off, press the back button and wait about 1 minute (30 to 50 seconds left).

8.Confirm the oil level information again to check the letters of the normal oil level.

Audi A6 Introduction:

Take the Audi A6 (imported) 2022 AllRoad Quattro55TFSI Ice and Snow Sport Edition as an example. Its body structure is a 5-door and 5-seater touring crossover, with body dimensions of 4951mm long, 1902mm wide, 1498mm high, and a wheelbase of 2925mm.

The Audi A6 (imported) 2022 ALLROAD Quattro55TFSI Ice and Snow Sport Edition is equipped with a turbocharged engine with a maximum horsepower of 340ps, a maximum torque of 500Nm, and a maximum power of 250kW, mated to a 7-speed wet dual-clutch transmission.

The Audi A6L uses an electronic fuel gauge that allows you to check the fuel level through the MMI display in the car. Click the CAR button, then select CAR System, and select the maintenance interface on the far right. When the engine reaches the normal operating temperature and idles for a period of time, turn off the engine, then turn on the power again to the ON position, wait for two minutes, and the oil level will be displayed.

The use of the electronic fuel gauge makes it easy for the owner to check the fuel level without getting his hands dirty.

The use of electronic fuel gauges has advantages and disadvantages. For high-end cars like the Audi A6L, using an electronic fuel gauge can increase the pressure and also make it easier for the owner to check the fuel level. But from another point of view, is the oil level reflected by this electronic fuel meter really accurate? At least the dipstick is accurate.

For experienced car owners, the dipstick will be more popular than the electronic dipstick. Because with the dipstick, you can see not only the oil level, but also the quality of the oil, so you can judge the internal parts of the engine and whether an oil change is needed. But this part of the car owners should still be in the minority.

For Audi models, 5w40 oil is generally used. The choice of lubricant brand, which requires long-term use of engine oil, can choose Mobil oil. The oil requires strong cleaning ability, so Shell oil is recommended.

If you need an oil with strong film toughness, you can choose Castrol. As with turbocharged engines, carbon deposits are susceptible at high speeds, so you can use Shell synthetic oils, which have a strong cleaning power.

Naturally aspirated engines require general oil quality. Mineral oil and semi-synthetic oil can be used. If the owner has a large budget, you can use fully synthetic oil.

Compared with the self-priming engine, the engine structure of the turbocharged engine is more precise, the working environment is harsher, the oil performance is better, the lubricating oil fluidity is better, and it is best to use fully synthetic engine oil.

2.Can I add it directly when there is less oil?

3.Is it okay if the oil is just at the upper limit?