i3530 Overclocking Tutorial, i3 530 Overclocking Tutorial

There is no need to overclock the landlord is a novice,Manual overclocking is too troublesome,You can take a look at the ** and tutorial on it,Here I won't count it in detail, the reason why I don't recommend overclocking is not only because the landlord is a novice,But also because Inter's I-series CPU generally supports cool frequency technology,This technology is actually a combination of overclocking and dynamic skill technology。 Although the main frequency of this U is by default, it will automatically reduce the frequency when it does not need to work at full load, and the reduction may reach the following, in order to reduce power consumption and extend the life of the hardware. And when running games or other large software needs to be at full capacity, it will automatically scale up to meet the needs.

Note that the upscaling here is not but higher. I don't know how much it can be cool, but it's definitely around. That's why I recommend that the landlord don't overclock, because the original technology of inter can already be compatible with this function, and the landlord can use it with peace of mind, I hope mine will help you!

I agree with it.,Pranks, i3, the performance is very sufficient, it is recommended that the landlord first check whether some programs occupy too much CPU, such as NOD32, automatic scanning, etc., these are very resource-consuming, and it is recommended to install the system with the original operating system image! ACER pre-installed a lot of useless programs,It is recommended to reinstall it with the original win7,And then according to the model ** driver,Finally, optimize it with the Rubik's Cube) If the software is checked, if it still can't solve the problem,Just see if there is a problem with the working temperature of the hardware Generally within the degree The graphics card is normal within the degree This is an idea to solve the problem Software first and then hardware Like the landlord, this situation is the problem of system settings or programs, if it can't be solved,Just find customer service for warranty

i3It is very difficult to overclock after having an integrated graphics card, this is normal, and the frequency of some modules needs to be reduced.

1.Reduce the QPI bus frequency of the H55 motherboard, the QPI adjustment of the H55 is 12X, 14X, 16X18X, 20X, 22XYou tune to the lowest 12x, according to the formula:

QPI frequency = base frequency * QPI bus frequency doubling * 2, it can be concluded that H55 can get a base frequency of 366MHz on the lowest 12xqpi, which is far more than the actual value of 300MHz.

The integrated graphics card of 530 will be overclocked together because of CPU overclocking, for example, the default frequency of the integrated graphics card of i3 is 733MHz, when the base frequency is increased from 133MHz to 200MHz, the frequency of the integrated graphics card becomes 733*200 133=1102MHz, and its frequency needs to be reduced first. Generally, it is enough to reduce the integrated graphics card to 400MHz, and the real frequency of the integrated graphics card at this time is 400*200 133=601MHz

3.Set the voltage, i3 defaults, and the safety threshold is within the limit. H55 has a VTT voltage, which should be adjusted according to a certain proportion, for example, if you exceed the base frequency of 200MHz, then the VTT voltage should be set to, as for the memory voltage, it is generally not more than basically safe.

A piece of I3 in our company can be supersed, the CPU voltage is about and about, and the VTT voltage is about and so.

The i5 3450 is not allowed to be overclocked without K.

However, here's the point. On the Z77 motherboard, you can enjoy the 4 multiplier benefits,The original main frequency is,After enjoying the 4 multiplier benefits,There are also 4 multipliers of the turbo frequency,So the highest can be reached, but this is not something that can be seen as soon as you enter the system,Only when the CPU load is heavier, it will automatically turbo to。

It's detailed enough, I hope it can help you.

The radiator is the Xuanbing 300 which is very good, I am using it, my i3 is fully loaded at 42 degrees, your estimate will not exceed 60 degrees.

There is a single core when it is fully loaded, and it is the highest when it is four cores, and it can be pulled 4 times the frequency, but the temperature will be very high, basically the full load will be about 77 degrees.

To get the full functionality of the turbo boost technology, you need to enable both the "Turbo Mode" and "C-State" options in the BIOS, otherwise it may only speed up by half.

It's a pity that the 3450 can't be overclocked, how can he be overclocked without letters.

CPU overclocking needs to be set in the BIOS.

The specific overclocking index and voltage depend on whether the motherboard supports it and whether the power supply is stable.

Depending on the make and model of the motherboard, the BISO setup steps and options are also different.

If you are not very clear about the role of each BIOS menu, please do not modify it at will, the consequences may be serious.

I'll take an example of an H55 motherboard that supports i3 540.

Power on and go to BIOS settings.

Turn off all CPU power-saving options, as shown in the figure above, Speedstep, CIE, TM Function, etc., and turn on others, because some options are related to performance; The Ratio CMOS setting is a CPU that adjusts the frequency multiplier and does not lock the frequency multiplier, so you can adjust the frequency multiplier at will.

Go to the overclocking option CPU Clock Mode and select OC Mode

CPU frequency, adjust the external frequency from 100 to 400.

QPI frequency = x2x (12 18 22 24, this is a fixed value, some motherboards will show x24, x36, x44, x48). Because the QPI frequency is generally higher than 8000, it will cause system instability, on the other hand, the higher the performance, the higher the performance, and it is related to the external frequency, such as when the external frequency is 166. qpi frequency=166x2x 12/18/22/24=1992x2/2988x2/3652x2/3984x2=3984/5976mhz/7968mhz/73047968mhz/7968mhz。

Memory frequency options.

Tuning voltage, this default selection is 800, and it can be appropriately increased to 1000 when running the limit

Memory parameter setting options, it's a pity that this motherboard doesn't support XMP, so it needs to be adjusted manually, because my memory is better, so you can choose to 7-7-7-21, and the general memory is recommended to choose 9-9-9-27.

At this point, all overclocking steps are complete.

You haven't done it, it is recommended that it is best not to overclock, although overclocking is quite foolish now, you can search for overclocking software to overclock, but for beginners, there is no corresponding efficient cooling system support and sensitive judgment nerves, it is easy to overbreak.

Besides, the i3 540 has a good effect on the vast majority of games now, even if overclocking may not bring much effect improvement, it can't be worth it if it's super bad.

Generally in the BIOS ultra. As far as I know, the overclocking ability of the i3 530 is quite strong, and there is not much problem with super 4G except for a few mines. And overclocking will not be super bad CPU, the big deal is the black screen at boot, clean the BIOS on the motherboard yourself, and restore the original settings.

The ones with M in the back are all portable CPUs, that is, notebooks, and it's not good for overclocking

Looks like this is a laptop CPU.

No! The one with k can be overclocked.

Ay... If you don't understand, don't try it, it's not good to burn the CPU Even if you understand, don't try it, after all, it's all risky!!

Do you still want to overclock the i3 now?

What about this, yes, you can go to the post bar to see if there is one, yes, if not, yes, go to the boutique area to take a look, right?