-
Anonymous users2024-02-07Simply plug your microphone directly into the jack on your desktop marked with the microphone logo, and if there is no sound, it will detect your volume attributes and sound card driver, including if the microphone is damaged.
-
Anonymous users2024-02-061. Right-click "Start" and select "Device Manager".
2. Turn on "Audio Input and Output".
3. Right-click "Microphone".
4. Click "Update Driver".
5. Click "Start" again.
6. Select "Settings" and click "Privacy".
7. Select "Microphone" and turn on "Allow apps to access your microphone".
8. Right-click "Little Speaker" and select "Sound".
9. Click "Record" and right-click "Stereo Mix".
10. Select "Disable".
11. Right-click "Microphone" and select "Properties".
12. Select "Level".
13. Turn the microphone volume to the maximum.
-
Anonymous users2024-02-05Method 1:
The specific steps of the computer to open the microphone function (here take the win10 system as an example) are as follows:
1. First of all, let's move the mouse to the lower left side of the screen and click the "Start" menu of win10.
2. Select and open "Computer Settings".
3. In the pop-up "Computer Settings" window, select and turn on "Privacy".
4. Open the "Privacy" window and find the "Microphone" function in the drop-down menu.
5. Turn on the "Microphone" function. (The microphone function is turned on by default, and you can easily turn the microphone on or off through the above methods.)
When the microphone is turned off in win10, programs that use the microphone will not be able to use the microphone. Note that the microphone switch and settings are in the privacy function).
Method 2: Set --- control panel --- sound and audio devices--- click Advanced Options in the Volume tab ---to remove the mute of the microphone. ——ok
-
Anonymous users2024-02-04Hello, if you refer to the microphone program, you can find it in the start menu in the lower left corner of the desktop, click on the attachments, and you can find it inside. If you are referring to the use of a microphone, once you connect the microphone, you can use it in various programs, as long as you set the default microphone. Such as games, all kinds of social software.
Therefore, there is no such thing as turning the microphone function on or off, only whether it is used or not.
-
Anonymous users2024-02-03Simply plug the microphone directly into the jack on your desktop marked with the microphone logo.
If your computer's sound card is normal, and the microphone is connected but there is no sound, please check and test it by following the methods below
One. Use the mouse to select the small speaker icon on the right side of the desktop taskbar, right-click the mouse, select "Open Volume Control" in the shortcut menu that appears, the "Master Volume" window will appear, in the "Options" menu, click "Properties", in the "Properties" window that appears, hit the box in front of the "Microphone Volume" option, and then press "OK". Go back to the "Master Volume" window, turn the "Microphone Volume" button up, and notice if there is a "Mute" option in front of the "Mute" option below, if so, you should remove it;
Two. Go to the "Control Panel" (from "Start Menu" - "Settings" - "Control Panel"), in the "Control Panel" window.
Select "Sound and Audio Devices", open this window, select "Voice", click the "Test Hardware" button at the bottom of the window, and then follow the prompts, step by step, if the connection is normal, pass this test, the microphone will have sound.
-
Anonymous users2024-02-021.Use the mouse to select the small speaker icon on the right side of the desktop taskbar, right-click the mouse, select "Open Volume Control" in the shortcut menu that appears, the "Master Volume" window will appear, in the "Options" menu, click "Properties", in the "Properties" window that appears, hit the box in front of the "Microphone Volume" option, and then press "OK". Go back to the "Master Volume" window, turn the "Microphone Volume" button up, and notice if there is a "Mute" option in front of the "Mute" option below, if so, you should remove it;
2.Go to the "Control Panel" (from "Start Menu" - "Settings" - "Control Panel"), in the "Control Panel" window.
Select "Sound and Audio Devices", open this window, select "Voice", click the "Test Hardware" button at the bottom of the window, and then follow the prompts, step by step, if your connection is normal, through this test, your microphone should have sound.
-
Anonymous users2024-02-01Open "This PC" on the system desktop, right-click "Properties", and then click on "Device Manager" on the left sidebar of the page that opens.
Open "Audio Input and Output", select "Microphone" and right-click "Update Driver". (Some microphones do not need to be driven).
Tap Start, check Privacy in Settings, select Microphone, and turn on Allow apps to access your microphone.
Right-click the "Little Speaker" at the bottom of the right side of the computer, select "Sound", click "Record", select "Stereo Mixing", and right-click "Disable".
Then right-click "Microphone", select "Properties", select "Level", and turn the microphone volume to the maximum.
Wireless Bluetooth microphone to connect to the computer: Turn on the wireless Bluetooth microphone - click on the computer's "Control Panel" - select "Hardware & Sound" - add a device "" - search for Bluetooth on the laptop - click OK.
-
Anonymous users2024-01-31How to speak with a microphone on a desktop computer: What should I do if the computer microphone is not sound?
-
Anonymous users2024-01-30Equipped with a headset or a single microphone, the green port of the earphone plugged in the sound card, and the powder port of the microphone.
If it is a microphone with a large plug on the power amplifier, then it needs to be equipped with a special adapter.
-
Anonymous users2024-01-29The microphone can be plugged directly into the computer, the red jack with the microphone logo, and the green jack with the earbud logo (don't plug it incorrectly). If there is no sound, turn on the big red speaker in the control panel and remove the cross under the microphone icon in the "mixer". If you want both the speaker and the microphone to make sound, click on the wrench that simulates the rear panel in the "Audio Io", select "Disable Front Panel Jack Detection", and finally click OK.
1. Desktops don't have their own microphones.
2. If the desktop computer does not need to chat or cannot use the microphone, you can not buy the microphone.
3. If you need to use a microphone for voice chat on the computer, meetings, etc., you can buy a microphone, and the microphone on the computer is also not expensive, dozens of yuan can be.
4. The microphone is a pink jack plugged into the computer, and you can open the voice software after plugging it in.
5. You can also adjust the settings of the small speaker in the lower right corner Right-click Recording Device Double-click the microphone or dot attribute In the level, you can adjust the volume of the microphone and the microphone enhancement (this is appropriately adjusted, and some computers will have current sound) Select noise suppression and echo cancellation in the enhancement, and select Listen to this device in the listening, you can hear your own voice (this normal use is not selected, some computers will be stuck or noisy).
-
Anonymous users2024-01-28Simply plug the microphone directly into the jack on your desktop marked with the microphone logo.
If your computer's sound card is normal, and the microphone is connected but there is no sound, please check and test it by following the methods below
1.Use the mouse to select the small speaker icon on the right side of the desktop taskbar, right-click the mouse, select "Open Volume Control" in the shortcut menu that appears, the "Master Volume" window will appear, in the "Options" menu, click "Properties", in the "Properties" base window that appears, hit the box in front of the "Microphone Volume" option, and then press "OK". Go back to the "Master Volume" window, turn the "Microphone Volume" button up, and notice if there is a "Mute" option in front of the "Mute" option below, if so, you should remove it;
2.Go to the "Control Panel" (from "Start Menu" - "Settings" - "Control Panel"), in the "Control Panel" window.
Select "Sound and Audio Devices", open this window, select "Voice", click the "Test Hardware" button at the bottom of the window, and then press the buried photo prompt, step by step, if the connection is normal, pass this test, the microphone will have sound.
When we sometimes use the computer, we feel that the brightness of the computer is too high, dazzling, or the brightness is not enough to make it difficult to see the content on the screen, how to adjust the brightness of the computer screen? It's actually very simple, you can use the software that comes with your computer's operating system, or you can use keyboard shortcuts (for laptops). Like the current desktop computer generally selected when the LCD monitor, the display itself has several adjustment buttons, the adjustment is also very simple, do not understand how to adjust the brightness of the computer screen friends can try it themselves, very simple, do not understand, you can read the display manual, the following are described in detail: >>>More
Most of the 691 errors are due to the following reasons:
1. The broadband username or password is incorrect. Sometimes, if you don't change your password for a long time, you may not be able to log in because your password is too old. If you make this error, you can simply re-enter your username and password, and sometimes you need to delete the account and create it again. >>>More
To connect to the network on a desktop computer, you need to choose a broadband PPPOE connection method, fill in the broadband account and password, and then click to connect to the broadband. The desktop computer creates a network connection as follows: 1. Click the [Start] button on the computer, then click the [Control Panel] button2, pop up the [Control Panel] window, click [Network and Sharing Center] 3, pop up the [Network and Sharing Center] interface, click [Set New Connection or Network] on the right, as shown in the following figure4, pop up the [Set Connection or Network] window, click the first item [Connect to Internet]5, click [Next], and the [Connect to Internet] window pops upIf you have already connected to a network, then select the second [still set a new connection] button and click 6, select the [broadband PPPOE] connection method 7, pop up the interface of setting broadband account password, and then click the [Connect] button after filling in the broadband account and password to connect to broadband. >>>More
This file is a help file for the network group component, when there is a network dial-up and other problems, the system prompts that the file is missing, which actually means that your system does not have this help file, and can not immediately display the solution and suggestions of the problem, that is, this file is a help document, not an important file of the system to be used on the Internet! >>>More
How to connect the projector to the computer The projector is connected to the desktop computer. >>>More