ZTE ZXV10 H108L wireless cat sent by China Telecom How to make a mobile phone use WFI successfully

According to your description: The wireless function of the optical modem is shielded and must be cracked through the super password before it can be used, but it is easy to cause network instability, you can buy a router and set up a router after connecting with the optical modem, so that it does not affect the stability of the network, and you can also use the wireless network.

Telecom broadband free speed, 4m liter 8m, 12m, 8m liter 20m, 20m liter 50m. You can go to the nearest telecom business hall, or call 10000 for free speed, details can be logged in Anhui Telecom online business hall.

Have a great day! Hope mine is helpful to you and can get yours!

1. Let's first understand the interface of the wireless router, see the figure below

2reset is mainly used to restore the factory settings of the router, if the router is set up incorrectly or the router login password can be used for this function. Generally, press and hold the button for 10 seconds to reset the router.

Mainly talk about the WAN port, this is connected to the modem, which is a small box provided to you by Telecom or Unicom.

LAN marking, this is used to connect to the computer branch line to access the Internet, 4 ports can be connected to 4 computers at the same time.

4. Click the Enter key to enter, enter the corresponding account and password, the general account and password are admin

5 After entering the operation interface, you will see a setup wizard on the left, Attack Enter (usually pops up automatically).

6. Enter the setup wizard interface.

7Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is broadband Internet access, use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

Because it is broadband Internet access, PPPoE is chosen.

8 choose PPPoE dial-up Internet access to fill in the Internet account and password, this should be understood by everyone, open broadband will have a document for you, there is an account password on it, fill in it OK (note, the password of telecommunications is generally 8 English characters, are capitalized).

10. The next step is to set it up successfully.

11Click Done, the router will automatically restart, at this time you should be patient. The interface that appears after success.

12 can see: disconnection two words, it means that the router has been connected to the Internet, the computer and mobile phone can access the Internet cable through this router, and then go online, as long as the router power is turned on, the computer does not need to dial, and you can go to the Internet directly when you turn it on.

The network cable is directly connected to the anchor, and then connected to the computer, the computer is connected to the Internet, the mobile phone searches for the wireless signal, and the password is entered on the line, the wireless Internet password is generally the original password, look at the manual.